Use the usual block comment style.
Signed-off-by: Ian Abbott <abbo...@mev.co.uk>
---
drivers/staging/comedi/drivers/8253.h | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/comedi/drivers/8253.h
b/drivers/staging/comedi/drivers/8253.h
index 55f1704..0d9aec0 100644
--- a/drivers/staging/comedi/drivers/8253.h
+++ b/drivers/staging/comedi/drivers/8253.h
@@ -44,9 +44,11 @@ static inline void i8253_cascade_ns_to_timer(int
i8253_osc_base,
unsigned int start;
unsigned int ns_low, ns_high;
static const unsigned int max_count = 0x10000;
- /* exit early if everything is already correct (this can save time
+ /*
+ * exit early if everything is already correct (this can save time
* since this function may be called repeatedly during command tests
- * and execution) */
+ * and execution)
+ */
div1 = *d1 ? *d1 : max_count;
div2 = *d2 ? *d2 : max_count;
divider = div1 * div2;
@@ -120,7 +122,8 @@ static inline void i8253_cascade_ns_to_timer(int
i8253_osc_base,
}
#ifndef CMDTEST
-/* i8254_load programs 8254 counter chip. It should also work for the 8253.
+/*
+ * i8254_load programs 8254 counter chip. It should also work for the 8253.
* base_address is the lowest io address
* for the chip (the address of counter 0).
* counter_number is the counter you want to load (0,1 or 2)
@@ -274,7 +277,8 @@ static inline void i8254_mm_write(void __iomem
*base_address,
writeb(byte, base_address + (counter_number << regshift));
}
-/* Set counter mode, should work for 8253 also.
+/*
+ * Set counter mode, should work for 8253 also.
* Note: the 'mode' value is different to that for i8254_load() and comes
* from the INSN_CONFIG_8254_SET_MODE command:
* I8254_MODE0, I8254_MODE1, ..., I8254_MODE5
--
2.1.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
