This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/Kconfig | 1 +
drivers/staging/comedi/drivers/amplc_pci230.c | 47 ++++++++++++---------------
2 files changed, 21 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 6d469e0..f63626f 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -816,6 +816,7 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
+ select COMEDI_8254
select COMEDI_8255
---help---
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c
b/drivers/staging/comedi/drivers/amplc_pci230.c
index 49806a5..a977156 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -188,7 +188,7 @@
#include "../comedidev.h"
#include "comedi_fc.h"
-#include "8253.h"
+#include "comedi_8254.h"
#include "8255.h"
/*
@@ -206,10 +206,6 @@
#define PCI230_PPI_X_C 0x02 /* User PPI (82C55) port C */
#define PCI230_PPI_X_CMD 0x03 /* User PPI (82C55) control word */
#define PCI230_Z2_CT_BASE 0x14 /* 82C54 counter/timer base */
-#define PCI230_Z2_CT0 0x14 /* 82C54 counter/timer 0 */
-#define PCI230_Z2_CT1 0x15 /* 82C54 counter/timer 1 */
-#define PCI230_Z2_CT2 0x16 /* 82C54 counter/timer 2 */
-#define PCI230_Z2_CTC 0x17 /* 82C54 counter/timer control word */
#define PCI230_ZCLK_SCE 0x1A /* Group Z Clock Configuration
*/
#define PCI230_ZGAT_SCE 0x1D /* Group Z Gate Configuration */
#define PCI230_INT_SCE 0x1E /* Interrupt source mask (w) */
@@ -377,12 +373,6 @@
#define CLK_EXT 7 /* external clock */
/* Macro to construct clock input configuration register value. */
#define CLK_CONFIG(chan, src) ((((chan) & 3) << 3) | ((src) & 7))
-/* Timebases in ns. */
-#define TIMEBASE_10MHZ 100
-#define TIMEBASE_1MHZ 1000
-#define TIMEBASE_100KHZ 10000
-#define TIMEBASE_10KHZ 100000
-#define TIMEBASE_1KHZ 1000000
/*
* Counter/timer gate input configuration sources.
@@ -507,11 +497,11 @@ struct pci230_private {
/* PCI230 clock source periods in ns */
static const unsigned int pci230_timebase[8] = {
- [CLK_10MHZ] = TIMEBASE_10MHZ,
- [CLK_1MHZ] = TIMEBASE_1MHZ,
- [CLK_100KHZ] = TIMEBASE_100KHZ,
- [CLK_10KHZ] = TIMEBASE_10KHZ,
- [CLK_1KHZ] = TIMEBASE_1KHZ,
+ [CLK_10MHZ] = I8254_OSC_BASE_10MHZ,
+ [CLK_1MHZ] = I8254_OSC_BASE_1MHZ,
+ [CLK_100KHZ] = I8254_OSC_BASE_100KHZ,
+ [CLK_10KHZ] = I8254_OSC_BASE_10KHZ,
+ [CLK_1KHZ] = I8254_OSC_BASE_1KHZ,
};
/* PCI230 analogue input range table */
@@ -695,7 +685,7 @@ static void pci230_ct_setup_ns_mode(struct comedi_device
*dev, unsigned int ct,
unsigned int count;
/* Set mode. */
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, ct, mode);
+ comedi_8254_set_mode(dev->pacer, ct, mode);
/* Determine clock source and count. */
clk_src = pci230_choose_clk_count(ns, &count, flags);
/* Program clock source. */
@@ -704,13 +694,13 @@ static void pci230_ct_setup_ns_mode(struct comedi_device
*dev, unsigned int ct,
if (count >= 65536)
count = 0;
- i8254_write(dev->iobase + PCI230_Z2_CT_BASE, 0, ct, count);
+ comedi_8254_write(dev->pacer, ct, count);
}
static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct)
{
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, ct, I8254_MODE1);
/* Counter ct, 8254 mode 1, initial count not written. */
+ comedi_8254_set_mode(dev->pacer, ct, I8254_MODE1);
}
static int pci230_ai_eoc(struct comedi_device *dev,
@@ -760,7 +750,7 @@ static int pci230_ai_insn_read(struct comedi_device *dev,
*/
adccon = PCI230_ADC_TRIG_Z2CT2 | PCI230_ADC_FIFO_EN;
/* Set Z2-CT2 output low to avoid any false triggers. */
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, 2, I8254_MODE0);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE0);
devpriv->ai_bipolar = comedi_range_is_bipolar(s, range);
if (aref == AREF_DIFF) {
/* Differential. */
@@ -811,10 +801,8 @@ static int pci230_ai_insn_read(struct comedi_device *dev,
* Trigger conversion by toggling Z2-CT2 output
* (finish with output high).
*/
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0,
- 2, I8254_MODE0);
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0,
- 2, I8254_MODE1);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE0);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE1);
/* wait for conversion to end */
ret = comedi_timeout(dev, s, insn, pci230_ai_eoc, 0);
@@ -1767,8 +1755,8 @@ static int pci230_ai_inttrig_convert(struct comedi_device
*dev,
* Trigger conversion by toggling Z2-CT2 output.
* Finish with output high.
*/
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, 2, I8254_MODE0);
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, 2, I8254_MODE1);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE0);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE1);
/*
* Delay. Should driver be responsible for this? An
* alternative would be to wait until conversion is complete,
@@ -2189,7 +2177,7 @@ static int pci230_ai_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
* Set counter/timer 2 output high for use as the initial start
* conversion source.
*/
- i8254_set_mode(dev->iobase + PCI230_Z2_CT_BASE, 0, 2, I8254_MODE1);
+ comedi_8254_set_mode(dev->pacer, 2, I8254_MODE1);
/*
* Temporarily use CT2 output as conversion trigger source and
@@ -2481,6 +2469,11 @@ static int pci230_auto_attach(struct comedi_device *dev,
dev->irq = pci_dev->irq;
}
+ dev->pacer = comedi_8254_init(dev->iobase + PCI230_Z2_CT_BASE,
+ 0, I8254_IO8, 0);
+ if (!dev->pacer)
+ return -ENOMEM;
+
rc = comedi_alloc_subdevices(dev, 3);
if (rc)
return rc;
--
2.3.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
