Move cvmx_usb_shutdown() to allow its use from some other functions.
Signed-off-by: Aaro Koskinen <aaro.koski...@iki.fi>
---
drivers/staging/octeon-usb/octeon-hcd.c | 66 ++++++++++++++++-----------------
1 file changed, 32 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c
b/drivers/staging/octeon-usb/octeon-hcd.c
index 257431f..c761a39 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -661,6 +661,38 @@ static int cvmx_fifo_setup(struct cvmx_usb_state *usb)
}
/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @usb: USB device state populated by cvmx_usb_initialize().
+ *
+ * Returns: 0 or a negative error code.
+ */
+static int cvmx_usb_shutdown(struct cvmx_usb_state *usb)
+{
+ union cvmx_usbnx_clk_ctl usbn_clk_ctl;
+
+ /* Make sure all pipes are closed */
+ if (!list_empty(&usb->idle_pipes) ||
+ !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) ||
+ !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) ||
+ !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) ||
+ !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK]))
+ return -EBUSY;
+
+ /* Disable the clocks and put them in power on reset */
+ usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
+ usbn_clk_ctl.s.enable = 1;
+ usbn_clk_ctl.s.por = 1;
+ usbn_clk_ctl.s.hclk_rst = 1;
+ usbn_clk_ctl.s.prst = 0;
+ usbn_clk_ctl.s.hrst = 0;
+ cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
+ return 0;
+}
+
+/**
* Initialize a USB port for use. This must be called before any
* other access to the Octeon USB port is made. The port starts
* off in the disabled state.
@@ -923,40 +955,6 @@ static int cvmx_usb_initialize(struct cvmx_usb_state *usb)
return 0;
}
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_shutdown(struct cvmx_usb_state *usb)
-{
- union cvmx_usbnx_clk_ctl usbn_clk_ctl;
-
- /* Make sure all pipes are closed */
- if (!list_empty(&usb->idle_pipes) ||
- !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) ||
- !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) ||
- !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) ||
- !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK]))
- return -EBUSY;
-
- /* Disable the clocks and put them in power on reset */
- usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
- usbn_clk_ctl.s.enable = 1;
- usbn_clk_ctl.s.por = 1;
- usbn_clk_ctl.s.hclk_rst = 1;
- usbn_clk_ctl.s.prst = 0;
- usbn_clk_ctl.s.hrst = 0;
- cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
- return 0;
-}
-
-
/**
* Reset a USB port. After this call succeeds, the USB port is
* online and servicing requests.
--
2.2.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
