Move the link helpers into a separate file.
Signed-off-by: Aaro Koskinen <aaro.koski...@iki.fi>
---
arch/mips/cavium-octeon/executive/Makefile | 2 +-
.../cavium-octeon/executive/cvmx-helper-board.c | 511 --------------------
arch/mips/cavium-octeon/executive/cvmx-link.c | 534 +++++++++++++++++++++
3 files changed, 535 insertions(+), 512 deletions(-)
create mode 100644 arch/mips/cavium-octeon/executive/cvmx-link.c
diff --git a/arch/mips/cavium-octeon/executive/Makefile
b/arch/mips/cavium-octeon/executive/Makefile
index e755a73..abafe06 100644
--- a/arch/mips/cavium-octeon/executive/Makefile
+++ b/arch/mips/cavium-octeon/executive/Makefile
@@ -14,7 +14,7 @@ obj-y += cvmx-pko.o cvmx-spi.o cvmx-cmd-queue.o \
cvmx-helper-board.o cvmx-helper.o cvmx-helper-xaui.o \
cvmx-helper-rgmii.o cvmx-helper-sgmii.o cvmx-helper-npi.o \
cvmx-helper-loop.o cvmx-helper-spi.o cvmx-helper-util.o \
- cvmx-helper-ethernet.o \
+ cvmx-helper-ethernet.o cvmx-link.o \
cvmx-interrupt-decodes.o cvmx-interrupt-rsl.o
obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index 9eb0fee..10f8de1 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -36,26 +36,9 @@
#include <asm/octeon/cvmx-config.h>
-#include <asm/octeon/cvmx-mdio.h>
-
#include <asm/octeon/cvmx-helper.h>
-#include <asm/octeon/cvmx-helper-util.h>
#include <asm/octeon/cvmx-helper-board.h>
-#include <asm/octeon/cvmx-gmxx-defs.h>
-#include <asm/octeon/cvmx-asxx-defs.h>
-
-/**
- * cvmx_override_board_link_get(int ipd_port) is a function
- * pointer. It is meant to allow customization of the process of
- * talking to a PHY to determine link speed. It is called every
- * time a PHY must be polled for link status. Users should set
- * this pointer to a function before calling any cvmx-helper
- * operations.
- */
-cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
- NULL;
-
/**
* Return the MII PHY address associated with the given IPD
* port. A result of -1 means there isn't a MII capable PHY
@@ -205,419 +188,6 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
}
/**
- * This function is the board specific method of determining an
- * ethernet ports link speed. Most Octeon boards have Marvell PHYs
- * and are handled by the fall through case. This function must be
- * updated for boards that don't have the normal Marvell PHYs.
- *
- * This function must be modified for every new Octeon board.
- * Internally it uses switch statements based on the cvmx_sysinfo
- * data to determine board types and revisions. It relies on the
- * fact that every Octeon board receives a unique board type
- * enumeration from the bootloader.
- *
- * @ipd_port: IPD input port associated with the port we want to get link
- * status for.
- *
- * Returns The ports link status. If the link isn't fully resolved, this must
- * return zero.
- */
-cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
-{
- cvmx_helper_link_info_t result;
- int phy_addr;
- int is_broadcom_phy = 0;
-
- /* Give the user a chance to override the processing of this function */
- if (cvmx_override_board_link_get)
- return cvmx_override_board_link_get(ipd_port);
-
- /* Unless we fix it later, all links are defaulted to down */
- result.u64 = 0;
-
- /*
- * This switch statement should handle all ports that either don't use
- * Marvell PHYS, or don't support in-band status.
- */
- switch (cvmx_sysinfo_get()->board_type) {
- case CVMX_BOARD_TYPE_SIM:
- /* The simulator gives you a simulated 1Gbps full duplex link */
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- return result;
- case CVMX_BOARD_TYPE_EBH3100:
- case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
- case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
- case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
- /* Port 1 on these boards is always Gigabit */
- if (ipd_port == 1) {
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- return result;
- }
- /* Fall through to the generic code below */
- break;
- case CVMX_BOARD_TYPE_CUST_NB5:
- /* Port 1 on these boards is always Gigabit */
- if (ipd_port == 1) {
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- return result;
- } else /* The other port uses a broadcom PHY */
- is_broadcom_phy = 1;
- break;
- case CVMX_BOARD_TYPE_BBGW_REF:
- /* Port 1 on these boards is always Gigabit */
- if (ipd_port == 2) {
- /* Port 2 is not hooked up */
- result.u64 = 0;
- return result;
- } else {
- /* Ports 0 and 1 connect to the switch */
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- return result;
- }
- break;
- case CVMX_BOARD_TYPE_CUST_DSR1000N:
- if (ipd_port == 0 || ipd_port == 1) {
- /* Ports 0 and 1 connect to a switch (BCM53115). */
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- return result;
- } else {
- /* Port 2 uses a Broadcom PHY (B5081). */
- is_broadcom_phy = 1;
- }
- break;
- }
-
- phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
- if (phy_addr != -1) {
- if (is_broadcom_phy) {
- /*
- * Below we are going to read SMI/MDIO
- * register 0x19 which works on Broadcom
- * parts
- */
- int phy_status =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- 0x19);
- switch ((phy_status >> 8) & 0x7) {
- case 0:
- result.u64 = 0;
- break;
- case 1:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 10;
- break;
- case 2:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 10;
- break;
- case 3:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 100;
- break;
- case 4:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 100;
- break;
- case 5:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 100;
- break;
- case 6:
- result.s.link_up = 1;
- result.s.full_duplex = 0;
- result.s.speed = 1000;
- break;
- case 7:
- result.s.link_up = 1;
- result.s.full_duplex = 1;
- result.s.speed = 1000;
- break;
- }
- } else {
- /*
- * This code assumes we are using a Marvell
- * Gigabit PHY. All the speed information can
- * be read from register 17 in one
- * go. Somebody using a different PHY will
- * need to handle it above in the board
- * specific area.
- */
- int phy_status =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
-
- /*
- * If the resolve bit 11 isn't set, see if
- * autoneg is turned off (bit 12, reg 0). The
- * resolve bit doesn't get set properly when
- * autoneg is off, so force it.
- */
- if ((phy_status & (1 << 11)) == 0) {
- int auto_status =
- cvmx_mdio_read(phy_addr >> 8,
- phy_addr & 0xff, 0);
- if ((auto_status & (1 << 12)) == 0)
- phy_status |= 1 << 11;
- }
-
- /*
- * Only return a link if the PHY has finished
- * auto negotiation and set the resolved bit
- * (bit 11)
- */
- if (phy_status & (1 << 11)) {
- result.s.link_up = 1;
- result.s.full_duplex = ((phy_status >> 13) & 1);
- switch ((phy_status >> 14) & 3) {
- case 0: /* 10 Mbps */
- result.s.speed = 10;
- break;
- case 1: /* 100 Mbps */
- result.s.speed = 100;
- break;
- case 2: /* 1 Gbps */
- result.s.speed = 1000;
- break;
- case 3: /* Illegal */
- result.u64 = 0;
- break;
- }
- }
- }
- } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
- || OCTEON_IS_MODEL(OCTEON_CN58XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
- /*
- * We don't have a PHY address, so attempt to use
- * in-band status. It is really important that boards
- * not supporting in-band status never get
- * here. Reading broken in-band status tends to do bad
- * things
- */
- union cvmx_gmxx_rxx_rx_inbnd inband_status;
- int interface = cvmx_helper_get_interface_num(ipd_port);
- int index = cvmx_helper_get_interface_index_num(ipd_port);
- inband_status.u64 =
- cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
-
- result.s.link_up = inband_status.s.status;
- result.s.full_duplex = inband_status.s.duplex;
- switch (inband_status.s.speed) {
- case 0: /* 10 Mbps */
- result.s.speed = 10;
- break;
- case 1: /* 100 Mbps */
- result.s.speed = 100;
- break;
- case 2: /* 1 Gbps */
- result.s.speed = 1000;
- break;
- case 3: /* Illegal */
- result.u64 = 0;
- break;
- }
- } else {
- /*
- * We don't have a PHY address and we don't have
- * in-band status. There is no way to determine the
- * link speed. Return down assuming this port isn't
- * wired
- */
- result.u64 = 0;
- }
-
- /* If link is down, return all fields as zero. */
- if (!result.s.link_up)
- result.u64 = 0;
-
- return result;
-}
-
-/**
- * This function as a board specific method of changing the PHY
- * speed, duplex, and auto-negotiation. This programs the PHY and
- * not Octeon. This can be used to force Octeon's links to
- * specific settings.
- *
- * @phy_addr: The address of the PHY to program
- * @enable_autoneg:
- * Non zero if you want to enable auto-negotiation.
- * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- * is enabled, all possible negotiation speeds are advertised.
- *
- * Returns Zero on success, negative on failure
- */
-int cvmx_helper_board_link_set_phy(int phy_addr,
- cvmx_helper_board_set_phy_link_flags_types_t
- link_flags,
- cvmx_helper_link_info_t link_info)
-{
-
- /* Set the flow control settings based on link_flags */
- if ((link_flags & set_phy_link_flags_flow_control_mask) !=
- set_phy_link_flags_flow_control_dont_touch) {
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.asymmetric_pause =
- (link_flags & set_phy_link_flags_flow_control_mask) ==
- set_phy_link_flags_flow_control_enable;
- reg_autoneg_adver.s.pause =
- (link_flags & set_phy_link_flags_flow_control_mask) ==
- set_phy_link_flags_flow_control_enable;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- }
-
- /* If speed isn't set and autoneg is on advertise all supported modes */
- if ((link_flags & set_phy_link_flags_autoneg)
- && (link_info.s.speed == 0)) {
- cvmx_mdio_phy_reg_control_t reg_control;
- cvmx_mdio_phy_reg_status_t reg_status;
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
- cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
- reg_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_STATUS);
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.advert_100base_t4 =
- reg_status.s.capable_100base_t4;
- reg_autoneg_adver.s.advert_10base_tx_full =
- reg_status.s.capable_10_full;
- reg_autoneg_adver.s.advert_10base_tx_half =
- reg_status.s.capable_10_half;
- reg_autoneg_adver.s.advert_100base_tx_full =
- reg_status.s.capable_100base_x_full;
- reg_autoneg_adver.s.advert_100base_tx_half =
- reg_status.s.capable_100base_x_half;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- if (reg_status.s.capable_extended_status) {
- reg_extended_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
- reg_control_1000.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000);
- reg_control_1000.s.advert_1000base_t_full =
- reg_extended_status.s.capable_1000base_t_full;
- reg_control_1000.s.advert_1000base_t_half =
- reg_extended_status.s.capable_1000base_t_half;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000,
- reg_control_1000.u16);
- }
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 1;
- reg_control.s.restart_autoneg = 1;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- } else if ((link_flags & set_phy_link_flags_autoneg)) {
- cvmx_mdio_phy_reg_control_t reg_control;
- cvmx_mdio_phy_reg_status_t reg_status;
- cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
- cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
-
- reg_status.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_STATUS);
- reg_autoneg_adver.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
- reg_autoneg_adver.s.advert_100base_t4 = 0;
- reg_autoneg_adver.s.advert_10base_tx_full = 0;
- reg_autoneg_adver.s.advert_10base_tx_half = 0;
- reg_autoneg_adver.s.advert_100base_tx_full = 0;
- reg_autoneg_adver.s.advert_100base_tx_half = 0;
- if (reg_status.s.capable_extended_status) {
- reg_control_1000.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000);
- reg_control_1000.s.advert_1000base_t_full = 0;
- reg_control_1000.s.advert_1000base_t_half = 0;
- }
- switch (link_info.s.speed) {
- case 10:
- reg_autoneg_adver.s.advert_10base_tx_full =
- link_info.s.full_duplex;
- reg_autoneg_adver.s.advert_10base_tx_half =
- !link_info.s.full_duplex;
- break;
- case 100:
- reg_autoneg_adver.s.advert_100base_tx_full =
- link_info.s.full_duplex;
- reg_autoneg_adver.s.advert_100base_tx_half =
- !link_info.s.full_duplex;
- break;
- case 1000:
- reg_control_1000.s.advert_1000base_t_full =
- link_info.s.full_duplex;
- reg_control_1000.s.advert_1000base_t_half =
- !link_info.s.full_duplex;
- break;
- }
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
- reg_autoneg_adver.u16);
- if (reg_status.s.capable_extended_status)
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL_1000,
- reg_control_1000.u16);
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 1;
- reg_control.s.restart_autoneg = 1;
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- } else {
- cvmx_mdio_phy_reg_control_t reg_control;
- reg_control.u16 =
- cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL);
- reg_control.s.autoneg_enable = 0;
- reg_control.s.restart_autoneg = 1;
- reg_control.s.duplex = link_info.s.full_duplex;
- if (link_info.s.speed == 1000) {
- reg_control.s.speed_msb = 1;
- reg_control.s.speed_lsb = 0;
- } else if (link_info.s.speed == 100) {
- reg_control.s.speed_msb = 0;
- reg_control.s.speed_lsb = 1;
- } else if (link_info.s.speed == 10) {
- reg_control.s.speed_msb = 0;
- reg_control.s.speed_lsb = 0;
- }
- cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
- CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
- }
- return 0;
-}
-
-/**
* This function is called by cvmx_helper_interface_probe() after it
* determines the number of ports Octeon can support on a specific
* interface. This function is the per board location to override
@@ -664,87 +234,6 @@ int __cvmx_helper_board_interface_probe(int interface, int
supported_ports)
}
/**
- * Enable packet input/output from the hardware. This function is
- * called after by cvmx_helper_packet_hardware_enable() to
- * perform board specific initialization. For most boards
- * nothing is needed.
- *
- * @interface: Interface to enable
- *
- * Returns Zero on success, negative on failure
- */
-int __cvmx_helper_board_hardware_enable(int interface)
-{
- if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) {
- if (interface == 0) {
- /* Different config for switch port */
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
- /*
- * Boards with gigabit WAN ports need a
- * different setting that is compatible with
- * 100 Mbit settings
- */
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface),
- 0xc);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
- 0xc);
- }
- } else if (cvmx_sysinfo_get()->board_type ==
- CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
- /*
- * Broadcom PHYs require differnet ASX
- * clocks. Unfortunately many boards don't define a
- * new board Id and simply mangle the
- * CN3010_EVB_HS5
- */
- if (interface == 0) {
- /*
- * Some boards use a hacked up bootloader that
- * identifies them as CN3010_EVB_HS5
- * evaluation boards. This leads to all kinds
- * of configuration problems. Detect one
- * case, and print warning, while trying to do
- * the right thing.
- */
- int phy_addr = cvmx_helper_board_get_mii_address(0);
- if (phy_addr != -1) {
- int phy_identifier =
- cvmx_mdio_read(phy_addr >> 8,
- phy_addr & 0xff, 0x2);
- /* Is it a Broadcom PHY? */
- if (phy_identifier == 0x0143) {
- cvmx_dprintf("\n");
- cvmx_dprintf("ERROR:\n");
- cvmx_dprintf
- ("ERROR: Board type is
CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
- cvmx_dprintf
- ("ERROR: The board type is
mis-configured, and software malfunctions are likely.\n");
- cvmx_dprintf
- ("ERROR: All boards require a
unique board type to identify them.\n");
- cvmx_dprintf("ERROR:\n");
- cvmx_dprintf("\n");
- cvmx_wait(1000000000);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
- (0, interface), 5);
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
- (0, interface), 5);
- }
- }
- }
- } else if (cvmx_sysinfo_get()->board_type ==
- CVMX_BOARD_TYPE_UBNT_E100) {
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
- cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
- cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
- }
- return 0;
-}
-
-/**
* Get the clock type used for the USB block based on board type.
* Used by the USB code for auto configuration of clock type.
*
diff --git a/arch/mips/cavium-octeon/executive/cvmx-link.c
b/arch/mips/cavium-octeon/executive/cvmx-link.c
new file mode 100644
index 0000000..626ec88
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-link.c
@@ -0,0 +1,534 @@
+/*
+ * This file is based on code from OCTEON SDK by Cavium Networks.
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ */
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-bootinfo.h>
+
+#include <asm/octeon/cvmx-config.h>
+
+#include <asm/octeon/cvmx-mdio.h>
+
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-util.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
+
+/**
+ * cvmx_override_board_link_get(int ipd_port) is a function
+ * pointer. It is meant to allow customization of the process of
+ * talking to a PHY to determine link speed. It is called every
+ * time a PHY must be polled for link status. Users should set
+ * this pointer to a function before calling any cvmx-helper
+ * operations.
+ */
+cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) =
+ NULL;
+
+/**
+ * This function is the board specific method of determining an
+ * ethernet ports link speed. Most Octeon boards have Marvell PHYs
+ * and are handled by the fall through case. This function must be
+ * updated for boards that don't have the normal Marvell PHYs.
+ *
+ * This function must be modified for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relies on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: IPD input port associated with the port we want to get link
+ * status for.
+ *
+ * Returns The ports link status. If the link isn't fully resolved, this must
+ * return zero.
+ */
+cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
+{
+ cvmx_helper_link_info_t result;
+ int phy_addr;
+ int is_broadcom_phy = 0;
+
+ /* Give the user a chance to override the processing of this function */
+ if (cvmx_override_board_link_get)
+ return cvmx_override_board_link_get(ipd_port);
+
+ /* Unless we fix it later, all links are defaulted to down */
+ result.u64 = 0;
+
+ /*
+ * This switch statement should handle all ports that either don't use
+ * Marvell PHYS, or don't support in-band status.
+ */
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_SIM:
+ /* The simulator gives you a simulated 1Gbps full duplex link */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ case CVMX_BOARD_TYPE_EBH3100:
+ case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+ case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 1) {
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+ /* Fall through to the generic code below */
+ break;
+ case CVMX_BOARD_TYPE_CUST_NB5:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 1) {
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ } else /* The other port uses a broadcom PHY */
+ is_broadcom_phy = 1;
+ break;
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ /* Port 1 on these boards is always Gigabit */
+ if (ipd_port == 2) {
+ /* Port 2 is not hooked up */
+ result.u64 = 0;
+ return result;
+ } else {
+ /* Ports 0 and 1 connect to the switch */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ }
+ break;
+ case CVMX_BOARD_TYPE_CUST_DSR1000N:
+ if (ipd_port == 0 || ipd_port == 1) {
+ /* Ports 0 and 1 connect to a switch (BCM53115). */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ return result;
+ } else {
+ /* Port 2 uses a Broadcom PHY (B5081). */
+ is_broadcom_phy = 1;
+ }
+ break;
+ }
+
+ phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
+ if (phy_addr != -1) {
+ if (is_broadcom_phy) {
+ /*
+ * Below we are going to read SMI/MDIO
+ * register 0x19 which works on Broadcom
+ * parts
+ */
+ int phy_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ 0x19);
+ switch ((phy_status >> 8) & 0x7) {
+ case 0:
+ result.u64 = 0;
+ break;
+ case 1:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 10;
+ break;
+ case 2:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 10;
+ break;
+ case 3:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 100;
+ break;
+ case 4:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 5:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 100;
+ break;
+ case 6:
+ result.s.link_up = 1;
+ result.s.full_duplex = 0;
+ result.s.speed = 1000;
+ break;
+ case 7:
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = 1000;
+ break;
+ }
+ } else {
+ /*
+ * This code assumes we are using a Marvell
+ * Gigabit PHY. All the speed information can
+ * be read from register 17 in one
+ * go. Somebody using a different PHY will
+ * need to handle it above in the board
+ * specific area.
+ */
+ int phy_status =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
+
+ /*
+ * If the resolve bit 11 isn't set, see if
+ * autoneg is turned off (bit 12, reg 0). The
+ * resolve bit doesn't get set properly when
+ * autoneg is off, so force it.
+ */
+ if ((phy_status & (1 << 11)) == 0) {
+ int auto_status =
+ cvmx_mdio_read(phy_addr >> 8,
+ phy_addr & 0xff, 0);
+ if ((auto_status & (1 << 12)) == 0)
+ phy_status |= 1 << 11;
+ }
+
+ /*
+ * Only return a link if the PHY has finished
+ * auto negotiation and set the resolved bit
+ * (bit 11)
+ */
+ if (phy_status & (1 << 11)) {
+ result.s.link_up = 1;
+ result.s.full_duplex = ((phy_status >> 13) & 1);
+ switch ((phy_status >> 14) & 3) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ }
+ }
+ } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+ /*
+ * We don't have a PHY address, so attempt to use
+ * in-band status. It is really important that boards
+ * not supporting in-band status never get
+ * here. Reading broken in-band status tends to do bad
+ * things
+ */
+ union cvmx_gmxx_rxx_rx_inbnd inband_status;
+ int interface = cvmx_helper_get_interface_num(ipd_port);
+ int index = cvmx_helper_get_interface_index_num(ipd_port);
+ inband_status.u64 =
+ cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
+
+ result.s.link_up = inband_status.s.status;
+ result.s.full_duplex = inband_status.s.duplex;
+ switch (inband_status.s.speed) {
+ case 0: /* 10 Mbps */
+ result.s.speed = 10;
+ break;
+ case 1: /* 100 Mbps */
+ result.s.speed = 100;
+ break;
+ case 2: /* 1 Gbps */
+ result.s.speed = 1000;
+ break;
+ case 3: /* Illegal */
+ result.u64 = 0;
+ break;
+ }
+ } else {
+ /*
+ * We don't have a PHY address and we don't have
+ * in-band status. There is no way to determine the
+ * link speed. Return down assuming this port isn't
+ * wired
+ */
+ result.u64 = 0;
+ }
+
+ /* If link is down, return all fields as zero. */
+ if (!result.s.link_up)
+ result.u64 = 0;
+
+ return result;
+}
+
+/**
+ * This function as a board specific method of changing the PHY
+ * speed, duplex, and auto-negotiation. This programs the PHY and
+ * not Octeon. This can be used to force Octeon's links to
+ * specific settings.
+ *
+ * @phy_addr: The address of the PHY to program
+ * @enable_autoneg:
+ * Non zero if you want to enable auto-negotiation.
+ * @link_info: Link speed to program. If the speed is zero and auto-negotiation
+ * is enabled, all possible negotiation speeds are advertised.
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_board_link_set_phy(int phy_addr,
+ cvmx_helper_board_set_phy_link_flags_types_t
+ link_flags,
+ cvmx_helper_link_info_t link_info)
+{
+
+ /* Set the flow control settings based on link_flags */
+ if ((link_flags & set_phy_link_flags_flow_control_mask) !=
+ set_phy_link_flags_flow_control_dont_touch) {
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.asymmetric_pause =
+ (link_flags & set_phy_link_flags_flow_control_mask) ==
+ set_phy_link_flags_flow_control_enable;
+ reg_autoneg_adver.s.pause =
+ (link_flags & set_phy_link_flags_flow_control_mask) ==
+ set_phy_link_flags_flow_control_enable;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ }
+
+ /* If speed isn't set and autoneg is on advertise all supported modes */
+ if ((link_flags & set_phy_link_flags_autoneg)
+ && (link_info.s.speed == 0)) {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ cvmx_mdio_phy_reg_status_t reg_status;
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
+ cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+ reg_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_STATUS);
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.advert_100base_t4 =
+ reg_status.s.capable_100base_t4;
+ reg_autoneg_adver.s.advert_10base_tx_full =
+ reg_status.s.capable_10_full;
+ reg_autoneg_adver.s.advert_10base_tx_half =
+ reg_status.s.capable_10_half;
+ reg_autoneg_adver.s.advert_100base_tx_full =
+ reg_status.s.capable_100base_x_full;
+ reg_autoneg_adver.s.advert_100base_tx_half =
+ reg_status.s.capable_100base_x_half;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ if (reg_status.s.capable_extended_status) {
+ reg_extended_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
+ reg_control_1000.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000);
+ reg_control_1000.s.advert_1000base_t_full =
+ reg_extended_status.s.capable_1000base_t_full;
+ reg_control_1000.s.advert_1000base_t_half =
+ reg_extended_status.s.capable_1000base_t_half;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000,
+ reg_control_1000.u16);
+ }
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 1;
+ reg_control.s.restart_autoneg = 1;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ } else if ((link_flags & set_phy_link_flags_autoneg)) {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ cvmx_mdio_phy_reg_status_t reg_status;
+ cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
+ cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
+
+ reg_status.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_STATUS);
+ reg_autoneg_adver.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
+ reg_autoneg_adver.s.advert_100base_t4 = 0;
+ reg_autoneg_adver.s.advert_10base_tx_full = 0;
+ reg_autoneg_adver.s.advert_10base_tx_half = 0;
+ reg_autoneg_adver.s.advert_100base_tx_full = 0;
+ reg_autoneg_adver.s.advert_100base_tx_half = 0;
+ if (reg_status.s.capable_extended_status) {
+ reg_control_1000.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000);
+ reg_control_1000.s.advert_1000base_t_full = 0;
+ reg_control_1000.s.advert_1000base_t_half = 0;
+ }
+ switch (link_info.s.speed) {
+ case 10:
+ reg_autoneg_adver.s.advert_10base_tx_full =
+ link_info.s.full_duplex;
+ reg_autoneg_adver.s.advert_10base_tx_half =
+ !link_info.s.full_duplex;
+ break;
+ case 100:
+ reg_autoneg_adver.s.advert_100base_tx_full =
+ link_info.s.full_duplex;
+ reg_autoneg_adver.s.advert_100base_tx_half =
+ !link_info.s.full_duplex;
+ break;
+ case 1000:
+ reg_control_1000.s.advert_1000base_t_full =
+ link_info.s.full_duplex;
+ reg_control_1000.s.advert_1000base_t_half =
+ !link_info.s.full_duplex;
+ break;
+ }
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_AUTONEG_ADVER,
+ reg_autoneg_adver.u16);
+ if (reg_status.s.capable_extended_status)
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL_1000,
+ reg_control_1000.u16);
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 1;
+ reg_control.s.restart_autoneg = 1;
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ } else {
+ cvmx_mdio_phy_reg_control_t reg_control;
+ reg_control.u16 =
+ cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL);
+ reg_control.s.autoneg_enable = 0;
+ reg_control.s.restart_autoneg = 1;
+ reg_control.s.duplex = link_info.s.full_duplex;
+ if (link_info.s.speed == 1000) {
+ reg_control.s.speed_msb = 1;
+ reg_control.s.speed_lsb = 0;
+ } else if (link_info.s.speed == 100) {
+ reg_control.s.speed_msb = 0;
+ reg_control.s.speed_lsb = 1;
+ } else if (link_info.s.speed == 10) {
+ reg_control.s.speed_msb = 0;
+ reg_control.s.speed_lsb = 0;
+ }
+ cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff,
+ CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
+ }
+ return 0;
+}
+
+/**
+ * Enable packet input/output from the hardware. This function is
+ * called after by cvmx_helper_packet_hardware_enable() to
+ * perform board specific initialization. For most boards
+ * nothing is needed.
+ *
+ * @interface: Interface to enable
+ *
+ * Returns Zero on success, negative on failure
+ */
+int __cvmx_helper_board_hardware_enable(int interface)
+{
+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) {
+ if (interface == 0) {
+ /* Different config for switch port */
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+ /*
+ * Boards with gigabit WAN ports need a
+ * different setting that is compatible with
+ * 100 Mbit settings
+ */
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface),
+ 0xc);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface),
+ 0xc);
+ }
+ } else if (cvmx_sysinfo_get()->board_type ==
+ CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
+ /*
+ * Broadcom PHYs require differnet ASX
+ * clocks. Unfortunately many boards don't define a
+ * new board Id and simply mangle the
+ * CN3010_EVB_HS5
+ */
+ if (interface == 0) {
+ /*
+ * Some boards use a hacked up bootloader that
+ * identifies them as CN3010_EVB_HS5
+ * evaluation boards. This leads to all kinds
+ * of configuration problems. Detect one
+ * case, and print warning, while trying to do
+ * the right thing.
+ */
+ int phy_addr = cvmx_helper_board_get_mii_address(0);
+ if (phy_addr != -1) {
+ int phy_identifier =
+ cvmx_mdio_read(phy_addr >> 8,
+ phy_addr & 0xff, 0x2);
+ /* Is it a Broadcom PHY? */
+ if (phy_identifier == 0x0143) {
+ cvmx_dprintf("\n");
+ cvmx_dprintf("ERROR:\n");
+ cvmx_dprintf
+ ("ERROR: Board type is
CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
+ cvmx_dprintf
+ ("ERROR: The board type is
mis-configured, and software malfunctions are likely.\n");
+ cvmx_dprintf
+ ("ERROR: All boards require a
unique board type to identify them.\n");
+ cvmx_dprintf("ERROR:\n");
+ cvmx_dprintf("\n");
+ cvmx_wait(1000000000);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX
+ (0, interface), 5);
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX
+ (0, interface), 5);
+ }
+ }
+ }
+ } else if (cvmx_sysinfo_get()->board_type ==
+ CVMX_BOARD_TYPE_UBNT_E100) {
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
+ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
+ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
+ }
+ return 0;
+}
--
2.3.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
