On Fri, Feb 19, 2016 at 01:57:43AM +0100, Salah Triki wrote:
> The call of read_nic_word_E may fail, therefore its return value
> must be checked.
>
> Signed-off-by: Salah Triki <salah.tr...@acm.org>
> ---
> drivers/staging/rtl8192u/r8180_93cx6.c | 24 +++++++++++++++++++-----
> 1 file changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c
> b/drivers/staging/rtl8192u/r8180_93cx6.c
> index 97d9b3f..7491b21 100644
> --- a/drivers/staging/rtl8192u/r8180_93cx6.c
> +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
> @@ -23,8 +23,11 @@
> static void eprom_cs(struct net_device *dev, short bit)
> {
> u8 cmdreg;
> + int err;
>
> - read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + if (err)
> + return;
> if (bit)
> /* enable EPROM */
> write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_CS_BIT);
> @@ -40,13 +43,18 @@ static void eprom_cs(struct net_device *dev, short bit)
> static void eprom_ck_cycle(struct net_device *dev)
> {
> u8 cmdreg;
> + int err;
>
> - read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + if (err)
> + return;
> write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_CK_BIT);
> force_pci_posting(dev);
> udelay(EPROM_DELAY);
>
> - read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + if (err)
> + return;
> write_nic_byte_E(dev, EPROM_CMD, cmdreg & ~EPROM_CK_BIT);
> force_pci_posting(dev);
> udelay(EPROM_DELAY);
> @@ -56,8 +64,11 @@ static void eprom_ck_cycle(struct net_device *dev)
> static void eprom_w(struct net_device *dev, short bit)
> {
> u8 cmdreg;
> + int err;
>
> - read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + err = read_nic_byte_E(dev, EPROM_CMD, &cmdreg);
> + if (err)
> + return;
> if (bit)
> write_nic_byte_E(dev, EPROM_CMD, cmdreg | EPROM_W_BIT);
> else
> @@ -71,8 +82,11 @@ static void eprom_w(struct net_device *dev, short bit)
> static short eprom_r(struct net_device *dev)
> {
> u8 bit;
> + int err;
>
> - read_nic_byte_E(dev, EPROM_CMD, &bit);
> + err = read_nic_byte_E(dev, EPROM_CMD, &bit);
> + if (err)
> + return 1;
Why did you return "success" for this error?
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
