From: Chris Park <chris.p...@atmel.com>

This patch removes the unnecessary log messages which is used with
the HOSTAPD_DBG tag.

Signed-off-by: Chris Park <chris.p...@atmel.com>
Signed-off-by: Leo Kim <leo....@atmel.com>
---
 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 90 +----------------------
 1 file changed, 2 insertions(+), 88 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c 
b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 8a3da2d..c989d42 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -1361,10 +1361,6 @@ static int get_station(struct wiphy *wiphy, struct 
net_device *dev,
        vif = netdev_priv(dev);
 
        if (vif->iftype == AP_MODE || vif->iftype == GO_MODE) {
-               PRINT_D(HOSTAPD_DBG, "Getting station parameters\n");
-
-               PRINT_INFO(HOSTAPD_DBG, ": %x%x%x%x%x\n", mac[0], mac[1], 
mac[2], mac[3], mac[4]);
-
                for (i = 0; i < NUM_STA_ASSOCIATED; i++) {
                        if (!(memcmp(mac, 
priv->assoc_stainfo.au8Sta_AssociatedBss[i], ETH_ALEN))) {
                                associatedsta = i;
@@ -2042,9 +2038,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
        vif = netdev_priv(dev);
        priv = wiphy_priv(wiphy);
        wl = vif->wilc;
-
-       PRINT_D(HOSTAPD_DBG, "In Change virtual interface function\n");
-       PRINT_D(HOSTAPD_DBG, "Wireless interface name =%s\n", dev->name);
        p2p_local_random = 0x01;
        p2p_recv_random = 0x00;
        wilc_ie = false;
@@ -2054,8 +2047,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
        switch (type) {
        case NL80211_IFTYPE_STATION:
                wilc_connecting = 0;
-               PRINT_D(HOSTAPD_DBG, "Interface type = 
NL80211_IFTYPE_STATION\n");
-
                dev->ieee80211_ptr->iftype = type;
                priv->wdev->iftype = type;
                vif->monitor_flag = 0;
@@ -2070,8 +2061,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
 
        case NL80211_IFTYPE_P2P_CLIENT:
                wilc_connecting = 0;
-               PRINT_D(HOSTAPD_DBG, "Interface type = 
NL80211_IFTYPE_P2P_CLIENT\n");
-
                dev->ieee80211_ptr->iftype = type;
                priv->wdev->iftype = type;
                vif->monitor_flag = 0;
@@ -2084,7 +2073,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
 
        case NL80211_IFTYPE_AP:
                wilc_enable_ps = false;
-               PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_AP %d\n", 
type);
                dev->ieee80211_ptr->iftype = type;
                priv->wdev->iftype = type;
                vif->iftype = AP_MODE;
@@ -2101,8 +2089,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
                wilc_optaining_ip = true;
                mod_timer(&wilc_during_ip_timer,
                          jiffies + msecs_to_jiffies(during_ip_time));
-               PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_GO\n");
-
                wilc_set_operation_mode(vif, AP_MODE);
                dev->ieee80211_ptr->iftype = type;
                priv->wdev->iftype = type;
@@ -2131,11 +2117,7 @@ static int start_ap(struct wiphy *wiphy, struct 
net_device *dev,
 
        priv = wiphy_priv(wiphy);
        vif = netdev_priv(dev);
-       wl = vif->wilc;
-       PRINT_D(HOSTAPD_DBG, "Starting ap\n");
-
-       PRINT_D(HOSTAPD_DBG, "Interval = %d\n DTIM period = %d\n Head length = 
%zu Tail length = %zu\n",
-               settings->beacon_interval, settings->dtim_period, 
beacon->head_len, beacon->tail_len);
+       wl = vif ->wilc;
 
        s32Error = set_channel(wiphy, &settings->chandef);
 
@@ -2162,8 +2144,6 @@ static int change_beacon(struct wiphy *wiphy, struct 
net_device *dev,
 
        priv = wiphy_priv(wiphy);
        vif = netdev_priv(priv->dev);
-       PRINT_D(HOSTAPD_DBG, "Setting beacon\n");
-
 
        s32Error = wilc_add_beacon(vif, 0, 0, beacon->head_len,
                                   (u8 *)beacon->head, beacon->tail_len,
@@ -2185,8 +2165,6 @@ static int stop_ap(struct wiphy *wiphy, struct net_device 
*dev)
        priv = wiphy_priv(wiphy);
        vif = netdev_priv(priv->dev);
 
-       PRINT_D(HOSTAPD_DBG, "Deleting beacon\n");
-
        wilc_wlan_set_bssid(dev, NullBssid, AP_MODE);
 
        s32Error = wilc_del_beacon(vif);
@@ -2222,9 +2200,6 @@ static int add_station(struct wiphy *wiphy, struct 
net_device *dev,
 
                PRINT_D(CFG80211_DBG, "BSSID = %x%x%x%x%x%x\n", 
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][0], 
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][1], 
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][2], 
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][3], 
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][4],
                        
priv->assoc_stainfo.au8Sta_AssociatedBss[params->aid][5]);
-               PRINT_D(HOSTAPD_DBG, "ASSOC ID = %d\n", strStaParams.aid);
-               PRINT_D(HOSTAPD_DBG, "Number of supported rates = %d\n",
-                       strStaParams.rates_len);
 
                if (!params->ht_capa) {
                        strStaParams.ht_supported = false;
@@ -2243,23 +2218,6 @@ static int add_station(struct wiphy *wiphy, struct 
net_device *dev,
                strStaParams.flags_mask = params->sta_flags_mask;
                strStaParams.flags_set = params->sta_flags_set;
 
-               PRINT_D(HOSTAPD_DBG, "IS HT supported = %d\n",
-                       strStaParams.ht_supported);
-               PRINT_D(HOSTAPD_DBG, "Capability Info = %d\n",
-                       strStaParams.ht_capa_info);
-               PRINT_D(HOSTAPD_DBG, "AMPDU Params = %d\n",
-                       strStaParams.ht_ampdu_params);
-               PRINT_D(HOSTAPD_DBG, "HT Extended params = %d\n",
-                       strStaParams.ht_ext_params);
-               PRINT_D(HOSTAPD_DBG, "Tx Beamforming Cap = %d\n",
-                       strStaParams.ht_tx_bf_cap);
-               PRINT_D(HOSTAPD_DBG, "Antenna selection info = %d\n",
-                       strStaParams.ht_ante_sel);
-               PRINT_D(HOSTAPD_DBG, "Flag Mask = %d\n",
-                       strStaParams.flags_mask);
-               PRINT_D(HOSTAPD_DBG, "Flag Set = %d\n",
-                       strStaParams.flags_set);
-
                s32Error = wilc_add_station(vif, &strStaParams);
                if (s32Error)
                        netdev_err(dev, "Host add station fail\n");
@@ -2283,16 +2241,9 @@ static int del_station(struct wiphy *wiphy, struct 
net_device *dev,
        vif = netdev_priv(dev);
 
        if (vif->iftype == AP_MODE || vif->iftype == GO_MODE) {
-               PRINT_D(HOSTAPD_DBG, "Deleting station\n");
-
-
-               if (!mac) {
-                       PRINT_D(HOSTAPD_DBG, "All associated stations\n");
+               if (!mac)
                        s32Error = wilc_del_allstation(vif,
                                     priv->assoc_stainfo.au8Sta_AssociatedBss);
-               } else {
-                       PRINT_D(HOSTAPD_DBG, "With mac address: 
%x%x%x%x%x%x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-               }
 
                s32Error = wilc_del_station(vif, mac);
 
@@ -2310,9 +2261,6 @@ static int change_station(struct wiphy *wiphy, struct 
net_device *dev,
        struct add_sta_param strStaParams = { {0} };
        struct wilc_vif *vif;
 
-
-       PRINT_D(HOSTAPD_DBG, "Change station paramters\n");
-
        if (!wiphy)
                return -EFAULT;
 
@@ -2325,14 +2273,6 @@ static int change_station(struct wiphy *wiphy, struct 
net_device *dev,
                strStaParams.rates_len = params->supported_rates_len;
                strStaParams.rates = params->supported_rates;
 
-               PRINT_D(HOSTAPD_DBG, "BSSID = %x%x%x%x%x%x\n",
-                       strStaParams.bssid[0], strStaParams.bssid[1],
-                       strStaParams.bssid[2], strStaParams.bssid[3],
-                       strStaParams.bssid[4], strStaParams.bssid[5]);
-               PRINT_D(HOSTAPD_DBG, "ASSOC ID = %d\n", strStaParams.aid);
-               PRINT_D(HOSTAPD_DBG, "Number of supported rates = %d\n",
-                       strStaParams.rates_len);
-
                if (!params->ht_capa) {
                        strStaParams.ht_supported = false;
                } else {
@@ -2350,23 +2290,6 @@ static int change_station(struct wiphy *wiphy, struct 
net_device *dev,
                strStaParams.flags_mask = params->sta_flags_mask;
                strStaParams.flags_set = params->sta_flags_set;
 
-               PRINT_D(HOSTAPD_DBG, "IS HT supported = %d\n",
-                       strStaParams.ht_supported);
-               PRINT_D(HOSTAPD_DBG, "Capability Info = %d\n",
-                       strStaParams.ht_capa_info);
-               PRINT_D(HOSTAPD_DBG, "AMPDU Params = %d\n",
-                       strStaParams.ht_ampdu_params);
-               PRINT_D(HOSTAPD_DBG, "HT Extended params = %d\n",
-                       strStaParams.ht_ext_params);
-               PRINT_D(HOSTAPD_DBG, "Tx Beamforming Cap = %d\n",
-                       strStaParams.ht_tx_bf_cap);
-               PRINT_D(HOSTAPD_DBG, "Antenna selection info = %d\n",
-                       strStaParams.ht_ante_sel);
-               PRINT_D(HOSTAPD_DBG, "Flag Mask = %d\n",
-                       strStaParams.flags_mask);
-               PRINT_D(HOSTAPD_DBG, "Flag Set = %d\n",
-                       strStaParams.flags_set);
-
                s32Error = wilc_edit_station(vif, &strStaParams);
                if (s32Error)
                        netdev_err(dev, "Host edit station fail\n");
@@ -2386,20 +2309,12 @@ static struct wireless_dev *add_virtual_intf(struct 
wiphy *wiphy,
        struct net_device *new_ifc = NULL;
 
        priv = wiphy_priv(wiphy);
-
-
-
-       PRINT_D(HOSTAPD_DBG, "Adding monitor interface[%p]\n", 
priv->wdev->netdev);
-
        vif = netdev_priv(priv->wdev->netdev);
 
 
        if (type == NL80211_IFTYPE_MONITOR) {
-               PRINT_D(HOSTAPD_DBG, "Monitor interface mode: Initializing mon 
interface virtual device driver\n");
-               PRINT_D(HOSTAPD_DBG, "Adding monitor interface[%p]\n", 
vif->ndev);
                new_ifc = WILC_WFI_init_mon_interface(name, vif->ndev);
                if (new_ifc) {
-                       PRINT_D(HOSTAPD_DBG, "Setting monitor flag in private 
structure\n");
                        vif = netdev_priv(priv->wdev->netdev);
                        vif->monitor_flag = 1;
                }
@@ -2409,7 +2324,6 @@ static struct wireless_dev *add_virtual_intf(struct wiphy 
*wiphy,
 
 static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 {
-       PRINT_D(HOSTAPD_DBG, "Deleting virtual interface\n");
        return 0;
 }
 
-- 
1.9.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to