Fix the checkpatch.pl issues by using the BIT macro and defining some macros for the multi-bit fields.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com> Cc: Ian Abbott <abbo...@mev.co.uk> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- drivers/staging/comedi/drivers/amplc_pci224.c | 71 ++++++++++++++------------- 1 file changed, 38 insertions(+), 33 deletions(-) diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index cac011f..2e6decf 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -132,48 +132,53 @@ * DACCON values. */ /* (r/w) Scan trigger. */ -#define PCI224_DACCON_TRIG_MASK (7 << 0) -#define PCI224_DACCON_TRIG_NONE (0 << 0) /* none */ -#define PCI224_DACCON_TRIG_SW (1 << 0) /* software trig */ -#define PCI224_DACCON_TRIG_EXTP (2 << 0) /* ext +ve edge */ -#define PCI224_DACCON_TRIG_EXTN (3 << 0) /* ext -ve edge */ -#define PCI224_DACCON_TRIG_Z2CT0 (4 << 0) /* Z2 CT0 out */ -#define PCI224_DACCON_TRIG_Z2CT1 (5 << 0) /* Z2 CT1 out */ -#define PCI224_DACCON_TRIG_Z2CT2 (6 << 0) /* Z2 CT2 out */ +#define PCI224_DACCON_TRIG(x) (((x) & 0x7) << 0) +#define PCI224_DACCON_TRIG_MASK PCI224_DACCON_TRIG(7) +#define PCI224_DACCON_TRIG_NONE PCI224_DACCON_TRIG(0) /* none */ +#define PCI224_DACCON_TRIG_SW PCI224_DACCON_TRIG(1) /* soft trig */ +#define PCI224_DACCON_TRIG_EXTP PCI224_DACCON_TRIG(2) /* ext + edge */ +#define PCI224_DACCON_TRIG_EXTN PCI224_DACCON_TRIG(3) /* ext - edge */ +#define PCI224_DACCON_TRIG_Z2CT0 PCI224_DACCON_TRIG(4) /* Z2 CT0 out */ +#define PCI224_DACCON_TRIG_Z2CT1 PCI224_DACCON_TRIG(5) /* Z2 CT1 out */ +#define PCI224_DACCON_TRIG_Z2CT2 PCI224_DACCON_TRIG(6) /* Z2 CT2 out */ /* (r/w) Polarity (PCI224 only, PCI234 always bipolar!). */ -#define PCI224_DACCON_POLAR_MASK (1 << 3) -#define PCI224_DACCON_POLAR_UNI (0 << 3) /* range [0,Vref] */ -#define PCI224_DACCON_POLAR_BI (1 << 3) /* range [-Vref,Vref] */ +#define PCI224_DACCON_POLAR(x) (((x) & 0x1) << 3) +#define PCI224_DACCON_POLAR_MASK PCI224_DACCON_POLAR(1) +#define PCI224_DACCON_POLAR_UNI PCI224_DACCON_POLAR(0) /* [0,+V] */ +#define PCI224_DACCON_POLAR_BI PCI224_DACCON_POLAR(1) /* [-V,+V] */ /* (r/w) Internal Vref (PCI224 only, when LK1 in position 1-2). */ -#define PCI224_DACCON_VREF_MASK (3 << 4) -#define PCI224_DACCON_VREF_1_25 (0 << 4) /* Vref = 1.25V */ -#define PCI224_DACCON_VREF_2_5 (1 << 4) /* Vref = 2.5V */ -#define PCI224_DACCON_VREF_5 (2 << 4) /* Vref = 5V */ -#define PCI224_DACCON_VREF_10 (3 << 4) /* Vref = 10V */ +#define PCI224_DACCON_VREF(x) (((x) & 0x3) << 4) +#define PCI224_DACCON_VREF_MASK PCI224_DACCON_VREF(3) +#define PCI224_DACCON_VREF_1_25 PCI224_DACCON_VREF(0) /* 1.25V */ +#define PCI224_DACCON_VREF_2_5 PCI224_DACCON_VREF(1) /* 2.5V */ +#define PCI224_DACCON_VREF_5 PCI224_DACCON_VREF(2) /* 5V */ +#define PCI224_DACCON_VREF_10 PCI224_DACCON_VREF(3) /* 10V */ /* (r/w) Wraparound mode enable (to play back stored waveform). */ -#define PCI224_DACCON_FIFOWRAP (1 << 7) +#define PCI224_DACCON_FIFOWRAP BIT(7) /* (r/w) FIFO enable. It MUST be set! */ -#define PCI224_DACCON_FIFOENAB (1 << 8) +#define PCI224_DACCON_FIFOENAB BIT(8) /* (r/w) FIFO interrupt trigger level (most values are not very useful). */ -#define PCI224_DACCON_FIFOINTR_MASK (7 << 9) -#define PCI224_DACCON_FIFOINTR_EMPTY (0 << 9) /* when empty */ -#define PCI224_DACCON_FIFOINTR_NEMPTY (1 << 9) /* when not empty */ -#define PCI224_DACCON_FIFOINTR_NHALF (2 << 9) /* when not half full */ -#define PCI224_DACCON_FIFOINTR_HALF (3 << 9) /* when half full */ -#define PCI224_DACCON_FIFOINTR_NFULL (4 << 9) /* when not full */ -#define PCI224_DACCON_FIFOINTR_FULL (5 << 9) /* when full */ +#define PCI224_DACCON_FIFOINTR(x) (((x) & 0x7) << 9) +#define PCI224_DACCON_FIFOINTR_MASK PCI224_DACCON_FIFOINTR(7) +#define PCI224_DACCON_FIFOINTR_EMPTY PCI224_DACCON_FIFOINTR(0) /* empty */ +#define PCI224_DACCON_FIFOINTR_NEMPTY PCI224_DACCON_FIFOINTR(1) /* !empty */ +#define PCI224_DACCON_FIFOINTR_NHALF PCI224_DACCON_FIFOINTR(2) /* !half */ +#define PCI224_DACCON_FIFOINTR_HALF PCI224_DACCON_FIFOINTR(3) /* half */ +#define PCI224_DACCON_FIFOINTR_NFULL PCI224_DACCON_FIFOINTR(4) /* !full */ +#define PCI224_DACCON_FIFOINTR_FULL PCI224_DACCON_FIFOINTR(5) /* full */ /* (r-o) FIFO fill level. */ -#define PCI224_DACCON_FIFOFL_MASK (7 << 12) -#define PCI224_DACCON_FIFOFL_EMPTY (1 << 12) /* 0 */ -#define PCI224_DACCON_FIFOFL_ONETOHALF (0 << 12) /* [1,2048] */ -#define PCI224_DACCON_FIFOFL_HALFTOFULL (4 << 12) /* [2049,4095] */ -#define PCI224_DACCON_FIFOFL_FULL (6 << 12) /* 4096 */ +#define PCI224_DACCON_FIFOFL(x) (((x) & 0x7) << 12) +#define PCI224_DACCON_FIFOFL_MASK PCI224_DACCON_FIFOFL(7) +#define PCI224_DACCON_FIFOFL_EMPTY PCI224_DACCON_FIFOFL(1) /* 0 */ +#define PCI224_DACCON_FIFOFL_ONETOHALF PCI224_DACCON_FIFOFL(0) /* 1-2048 */ +#define PCI224_DACCON_FIFOFL_HALFTOFULL PCI224_DACCON_FIFOFL(4) /* 2049-4095 */ +#define PCI224_DACCON_FIFOFL_FULL PCI224_DACCON_FIFOFL(6) /* 4096 */ /* (r-o) DAC busy flag. */ -#define PCI224_DACCON_BUSY (1 << 15) +#define PCI224_DACCON_BUSY BIT(15) /* (w-o) FIFO reset. */ -#define PCI224_DACCON_FIFORESET (1 << 12) +#define PCI224_DACCON_FIFORESET BIT(12) /* (w-o) Global reset (not sure what it does). */ -#define PCI224_DACCON_GLOBALRESET (1 << 13) +#define PCI224_DACCON_GLOBALRESET BIT(13) /* * DAC FIFO size. -- 2.6.3 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
