Change multiline comments from:
/* line1
* line2
* ...
*/
to
/*
* line1
* line2
* ...
*/
Signed-off-by: Brian Masney <masn...@onstation.org>
---
drivers/staging/iio/light/isl29018.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/iio/light/isl29018.c
b/drivers/staging/iio/light/isl29018.c
index 130f222..132de8e 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -564,7 +564,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip)
return status;
}
- /* Code added per Intersil Application Note 1534:
+ /*
+ * Code added per Intersil Application Note 1534:
* When VDD sinks to approximately 1.8V or below, some of
* the part's registers may change their state. When VDD
* recovers to 2.25V (or greater), the part may thus be in an
@@ -591,7 +592,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip)
return status;
}
- /* See Intersil AN1534 comments above.
+ /*
+ * See Intersil AN1534 comments above.
* "Operating Mode" (COMMAND1) register is reprogrammed when
* data is read from the device.
*/
@@ -773,7 +775,8 @@ static int isl29018_suspend(struct device *dev)
mutex_lock(&chip->lock);
- /* Since this driver uses only polling commands, we are by default in
+ /*
+ * Since this driver uses only polling commands, we are by default in
* auto shutdown (ie, power-down) mode.
* So we do not have much to do here.
*/
--
2.5.5
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
