Fix the checkpatch.pl issue:
CHECK: Prefer kernel type 'u8' over 'uint8_t'
Signed-off-by: Saber Rezvani <irsa...@gmail.com>
Reviewed-by: Ian Abbott <abbo...@mev.co.uk>
---
drivers/staging/comedi/drivers/s626.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c
b/drivers/staging/comedi/drivers/s626.c
index c14a025..59a4aeb 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -75,7 +75,7 @@ struct s626_buffer_dma {
};
struct s626_private {
- uint8_t ai_cmd_running; /* ai_cmd is running */
+ u8 ai_cmd_running; /* ai_cmd is running */
unsigned int ai_sample_timer; /* time between samples in
* units of the timer */
int ai_convert_count; /* conversion counter */
@@ -83,7 +83,7 @@ struct s626_private {
* units of the timer */
uint16_t counter_int_enabs; /* counter interrupt enable mask
* for MISC2 register */
- uint8_t adc_items; /* number of items in ADC poll list */
+ u8 adc_items; /* number of items in ADC poll list */
struct s626_buffer_dma rps_buf; /* DMA buffer used to hold ADC (RPS1)
* program */
struct s626_buffer_dma ana_buf; /* DMA buffer used to receive ADC data
@@ -91,7 +91,7 @@ struct s626_private {
uint32_t *dac_wbuf; /* pointer to logical adrs of DMA buffer
* used to hold DAC data */
uint16_t dacpol; /* image of DAC polarity register */
- uint8_t trim_setpoint[12]; /* images of TrimDAC setpoints */
+ u8 trim_setpoint[12]; /* images of TrimDAC setpoints */
uint32_t i2c_adrs; /* I2C device address for onboard EEPROM
* (board rev dependent) */
};
@@ -267,8 +267,8 @@ static int s626_i2c_handshake(struct comedi_device *dev,
uint32_t val)
return ctrl & S626_I2C_ERR;
}
-/* Read uint8_t from EEPROM. */
-static uint8_t s626_i2c_read(struct comedi_device *dev, uint8_t addr)
+/* Read u8 from EEPROM. */
+static u8 s626_i2c_read(struct comedi_device *dev, u8 addr)
{
struct s626_private *devpriv = dev->private;
@@ -304,10 +304,10 @@ static uint8_t s626_i2c_read(struct comedi_device *dev,
uint8_t addr)
/* *********** DAC FUNCTIONS *********** */
/* TrimDac LogicalChan-to-PhysicalChan mapping table. */
-static const uint8_t s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
+static const u8 s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
/* TrimDac LogicalChan-to-EepromAdrs mapping table. */
-static const uint8_t s626_trimadrs[] = {
+static const u8 s626_trimadrs[] = {
0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63
};
@@ -582,7 +582,7 @@ static int s626_set_dac(struct comedi_device *dev,
}
static int s626_write_trim_dac(struct comedi_device *dev,
- uint8_t logical_chan, uint8_t dac_data)
+ u8 logical_chan, u8 dac_data)
{
struct s626_private *devpriv = dev->private;
uint32_t chan;
@@ -591,7 +591,7 @@ static int s626_write_trim_dac(struct comedi_device *dev,
* Save the new setpoint in case the application needs to read it back
* later.
*/
- devpriv->trim_setpoint[logical_chan] = (uint8_t)dac_data;
+ devpriv->trim_setpoint[logical_chan] = (u8)dac_data;
/* Map logical channel number to physical channel number. */
chan = s626_trimchan[logical_chan];
@@ -633,7 +633,7 @@ static int s626_write_trim_dac(struct comedi_device *dev,
static int s626_load_trim_dacs(struct comedi_device *dev)
{
- uint8_t i;
+ u8 i;
int ret;
/* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
@@ -1062,7 +1062,7 @@ static int s626_dio_clear_irq(struct comedi_device *dev)
}
static void s626_handle_dio_interrupt(struct comedi_device *dev,
- uint16_t irqbit, uint8_t group)
+ uint16_t irqbit, u8 group)
{
struct s626_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
@@ -1111,7 +1111,7 @@ static void s626_handle_dio_interrupt(struct
comedi_device *dev,
static void s626_check_dio_interrupts(struct comedi_device *dev)
{
uint16_t irqbit;
- uint8_t group;
+ u8 group;
for (group = 0; group < S626_DIO_BANKS; group++) {
/* read interrupt type */
@@ -1272,7 +1272,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
/*
* This function builds the RPS program for hardware driven acquisition.
*/
-static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
+static void s626_reset_adc(struct comedi_device *dev, u8 *ppl)
{
struct s626_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
@@ -1585,7 +1585,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
return n;
}
-static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
+static int s626_ai_load_polllist(u8 *ppl, struct comedi_cmd *cmd)
{
int n;
@@ -1693,7 +1693,7 @@ static void s626_timer_load(struct comedi_device *dev,
static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct s626_private *devpriv = dev->private;
- uint8_t ppl[16];
+ u8 ppl[16];
struct comedi_cmd *cmd = &s->async->cmd;
int tick;
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
