This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <larry.fin...@lwfinger.net>
Cc: Ping-Ke Shih <pks...@realtek.com>
---
 .../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c    | 33 ++++++++--------------
 .../net/wireless/realtek/rtlwifi/rtl8192cu/led.c   |  6 ++--
 .../net/wireless/realtek/rtlwifi/rtl8192cu/mac.c   | 12 +++-----
 .../net/wireless/realtek/rtlwifi/rtl8192cu/phy.c   | 12 +++-----
 .../net/wireless/realtek/rtlwifi/rtl8192cu/rf.c    |  3 +-
 .../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c    |  5 ++--
 6 files changed, 24 insertions(+), 47 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index aa3d559..dce13d6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -452,8 +452,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
                        break;
                }
                if (pollingCount++ > 100) {
-                       RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-                                "Failed to polling REG_APS_FSMCO[PFM_ALDN] 
done!\n");
+                       pr_err("rtl8192cu: Failed to polling 
REG_APS_FSMCO[PFM_ALDN] done!\n");
                        return -ENODEV;
                }
        } while (true);
@@ -486,8 +485,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
                        break;
                }
                if (pollingCount++ > 1000) {
-                       RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-                                "Failed to polling REG_APS_FSMCO[APFM_ONMAC] 
done!\n");
+                       pr_err("rtl8192cu: Failed to polling 
REG_APS_FSMCO[APFM_ONMAC] done!\n");
                        return -ENODEV;
                }
        } while (true);
@@ -687,7 +685,6 @@ static void 
_rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
                                                      u8 queue_sel)
 {
        u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
-       struct rtl_priv *rtlpriv = rtl_priv(hw);
 
        if (!wmm_enable) { /* typical setting */
                beQ     = QUEUE_LOW;
@@ -705,8 +702,7 @@ static void 
_rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
                hiQ     = QUEUE_HIGH;
        }
        _rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
-       RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
-                queue_sel);
+       pr_info("Tx queue select :0x%02x..\n", queue_sel);
 }
 
 static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw,
@@ -765,8 +761,7 @@ static void _rtl92cu_init_chipT_queue_priority(struct 
ieee80211_hw *hw,
                break;
        }
        rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele);
-       RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
-                hq_sele);
+       pr_info("Tx queue select :0x%02x..\n", hq_sele);
 }
 
 static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
@@ -848,8 +843,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
        err = _rtl92cu_init_power_on(hw);
 
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Failed to init power on!\n");
+               pr_err("rtl8192cu: Failed to init power on!\n");
                return err;
        }
        if (!wmm_enable) {
@@ -860,8 +854,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
                                        : WMM_CHIP_A_TX_PAGE_BOUNDARY;
        }
        if (false == rtl92c_init_llt_table(hw, boundary)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Failed to init LLT Table!\n");
+               pr_err("rtl8192cu: Failed to init LLT Table!\n");
                return -EINVAL;
        }
        _rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums,
@@ -986,7 +979,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
        rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
        err = _rtl92cu_init_mac(hw);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n");
+               pr_err("rtl8192cu: init mac failed!\n");
                goto exit;
        }
        err = rtl92c_download_fw(hw);
@@ -1099,8 +1092,7 @@ static void  _ResetDigitalProcedure1(struct ieee80211_hw 
*hw, bool bWithoutHWSM)
                                udelay(50);
                        }
                        if (retry_cnts >= 100) {
-                               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                        "#####=> 8051 reset 
failed!.........................\n");
+                               pr_err("rtl8192cu: 8051 reset 
failed!.........................\n");
                                /* if 8051 reset fail, reset MAC. */
                                rtl_write_byte(rtlpriv,
                                               REG_SYS_FUNC_EN + 1,
@@ -1340,8 +1332,7 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw 
*hw,
                         "Set Network type to AP!\n");
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Network type %d not supported!\n", type);
+               pr_err("rtl8192cu: Network type %d not supported!\n", type);
                goto error_out;
        }
        rtl_write_byte(rtlpriv, MSR, bt_msr);
@@ -1555,8 +1546,7 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 
variable, u8 *val)
        case HAL_DEF_WOWLAN:
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", variable);
+               pr_err("rtl8192cu: switch case %#x not processed\n", variable);
                break;
        }
 }
@@ -1926,8 +1916,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 
variable, u8 *val)
                        break;
                }
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", variable);
+               pr_err("rtl8192cu: switch case %#x not processed\n", variable);
                break;
        }
 }
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
index c624081..9d83f08 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c
@@ -57,8 +57,8 @@ void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct 
rtl_led *pled)
                rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", pled->ledpin);
+               pr_err("rtl8192cu: switch case %#x not processed\n",
+                      pled->ledpin);
                break;
        }
        pled->ledon = true;
@@ -90,8 +89,8 @@ void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct 
rtl_led *pled)
                rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", pled->ledpin);
+               pr_err("rtl8192cu: switch case %#x not processed\n",
+                      pled->ledpin);
                break;
        }
        pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
index cf212f6..1b124ea 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
@@ -157,9 +157,8 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, 
u32 data)
                if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
                        break;
                if (count > POLLING_LLT_THRESHOLD) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Failed to polling write LLT done at address 
%d! _LLT_OP_VALUE(%x)\n",
-                                address, _LLT_OP_VALUE(value));
+                       pr_err("rtl8192cu: Failed to polling write LLT done at 
address %d! _LLT_OP_VALUE(%x)\n",
+                              address, _LLT_OP_VALUE(value));
                        status = false;
                        break;
                }
@@ -262,8 +261,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
                        enc_algo = CAM_AES;
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "illegal switch case\n");
+                       pr_err("rtl8192cu: illegal switch case\n");
                        enc_algo = CAM_TKIP;
                        break;
                }
@@ -280,9 +278,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
                                        entry_id = rtl_cam_get_free_entry(hw,
                                                                 p_macaddr);
                                        if (entry_id >=  TOTAL_CAM_ENTRY) {
-                                               RT_TRACE(rtlpriv, COMP_SEC,
-                                                        DBG_EMERG,
-                                                        "Can not find free hw 
security cam entry\n");
+                                               pr_err("rtl8192cu: Can not find 
free hw security cam entry\n");
                                                return;
                                        }
                                } else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
index f35f435..452437f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c
@@ -274,8 +274,7 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct 
ieee80211_hw *hw,
                break;
        case RF90_PATH_C:
        case RF90_PATH_D:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", rfpath);
+               pr_err("rtl8192cu: switch case %#x not processed\n", rfpath);
                break;
        default:
                break;
@@ -314,8 +313,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw 
*hw)
                rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+               pr_err("rtl8192cu: unknown bandwidth: %#X\n",
+                      rtlphy->current_chan_bw);
                break;
        }
        switch (rtlphy->current_chan_bw) {
@@ -336,8 +334,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw 
*hw)
                               HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+               pr_err("rtl8192cu: unknown bandwidth: %#X\n",
+                      rtlphy->current_chan_bw);
                break;
        }
        rtl92cu_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -509,8 +506,8 @@ static bool _rtl92cu_phy_set_rf_power_state(struct 
ieee80211_hw *hw,
                _rtl92c_phy_set_rf_sleep(hw);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", rfpwr_state);
+               pr_err("rtl8192cu: switch case %#x not processed\n",
+                      rfpwr_state);
                bresult = false;
                break;
        }
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
index 5e31830..9cff6bc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c
@@ -51,8 +51,7 @@ void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw 
*hw, u8 bandwidth)
                              rtlphy->rfreg_chnlval[0]);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", bandwidth);
+               pr_err("rtl8192cu: unknown bandwidth: %#X\n", bandwidth);
                break;
        }
 }
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
index b84e13a..935e830 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
@@ -68,8 +68,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
        /* for firmware buf */
        rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
        if (!rtlpriv->rtlhal.pfirmware) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Can't alloc buffer for fw\n");
+               pr_err("rtl8192cu: Can't alloc buffer for fw\n");
                return 1;
        }
        if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
@@ -158,7 +157,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
 
 static struct rtl_mod_params rtl92cu_mod_params = {
        .sw_crypto = 0,
-       .debug = DBG_EMERG,
+       .debug = 0,
 };
 
 module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);
-- 
2.10.2

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to