Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robso...@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 164 ++++++++++-----------
1 file changed, 82 insertions(+), 82 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c27397b14adb..9e8ed8c2e21e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -217,8 +217,8 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
}
/*
-* Return: true if station in half n mode and AP supports 40 bw
-*/
+ * Return: true if station in half n mode and AP supports 40 bw
+ */
static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -412,7 +412,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device
*ieee)
* u8 * PeerMacAddr
* output: none
* return: return 1 if driver should declare MCS13 only(otherwise return 0)
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8
*PeerMacAddr)
{
return 0;
@@ -420,17 +420,17 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device
*ieee, u8 *PeerMacAddr)
/**
-* Function: HTIOTActIsDisableMCS15
-*
-* Overview: Check whether driver should declare capability of receiving
MCS15
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable MCS15
-* 2008.04.15 Emily
-*/
+ * Function: HTIOTActIsDisableMCS15
+ *
+ * Overview: Check whether driver should declare capability of receiving
MCS15
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable MCS15
+ * 2008.04.15 Emily
+ */
static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -457,17 +457,17 @@ static bool HTIOTActIsDisableMCS15(struct
ieee80211_device *ieee)
}
/**
-* Function: HTIOTActIsDisableMCSTwoSpatialStream
-*
-* Overview: Check whether driver should declare capability of receiving All
2 ss packets
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable all two spatial stream packet
-* 2008.04.21 Emily
-*/
+ * Function: HTIOTActIsDisableMCSTwoSpatialStream
+ *
+ * Overview: Check whether driver should declare capability of receiving All
2 ss packets
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable all two spatial stream packet
+ * 2008.04.21 Emily
+ */
static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
@@ -483,7 +483,7 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct
ieee80211_device *ieee,
* u8* PeerMacAddr
* output: none
* return: return 1 if driver should disable EDCA turbo mode(otherwise
return 0)
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{ /* default enable EDCA Turbo mode. */
@@ -495,7 +495,7 @@ static u8 HTIOTActIsDisableEDCATurbo(struct
ieee80211_device *ieee,
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
- *
*****************************************************************************************************************/
+
*****************************************************************************************************************/
static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
@@ -542,7 +542,7 @@ void HTResetIOTSetting(
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap,
u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -660,7 +660,7 @@ void HTConstructCapabilityElement(struct ieee80211_device
*ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before. only AP and
IBSS sta should do this
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8
*len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -707,23 +707,23 @@ void HTConstructInfoElement(struct ieee80211_device
*ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve
best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is,
set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to
other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic
stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the
stream runs concurrently
- * at the same time.
- *
- * Frame Format
- * Element ID Length OUI Type1
Reserved
- * 1 byte 1 byte 3 bytes 1 byte
1 byte
- *
- * OUI = 0x00, 0xe0, 0x4c,
- * Type = 0x02
- * Reserved = 0x00
- *
- * 2007.8.21 by Emily
-*/
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve
best performance
+ * if both STA and AP set limitation of aggregation size to 32K, that is, set
AMPDU density to 2
+ * (Ref: IEEE 11n specification). However, if Realtek STA associates to other
AP, STA should set
+ * limitation of aggregation size to 8K, otherwise, performance of traffic
stream from STA to AP
+ * will be much less than the traffic stream from AP to STA if both of the
stream runs concurrently
+ * at the same time.
+ *
+ * Frame Format
+ * Element ID Length OUI Type1
Reserved
+ * 1 byte 1 byte 3 bytes 1 byte
1 byte
+ *
+ * OUI = 0x00, 0xe0, 0x4c,
+ * Type = 0x02
+ * Reserved = 0x00
+ *
+ * 2007.8.21 by Emily
+ */
/********************************************************************************************************************
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
@@ -732,7 +732,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee,
u8 *posHTInfo, u8 *le
* output: none
* return: none
* notice:
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8
*posRT2RTAgg, u8 *len)
{
if (posRT2RTAgg == NULL) {
@@ -745,7 +745,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device
*ieee, u8 *posRT2RTAgg,
*posRT2RTAgg++ = 0x4c;
*posRT2RTAgg++ = 0x02;
*posRT2RTAgg++ = 0x01;
- *posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
+ *posRT2RTAgg = 0x10; // *posRT2RTAgg = 0x02;
if (ieee->bSupportRemoteWakeUp) {
*posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
@@ -756,16 +756,16 @@ void HTConstructRT2RTAggElement(struct ieee80211_device
*ieee, u8 *posRT2RTAgg,
#ifdef TODO
#if (HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
/*
- //Emily. If it is required to Ask Realtek AP to send AMPDU during AES
mode, enable this
- section of code.
- if(IS_UNDER_11N_AES_MODE(Adapter))
- {
- posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
- }else
- {
- posRT2RTAgg->Octet[5] &= 0xfb;
- }
- */
+ * Emily. If it is required to Ask Realtek AP to send AMPDU during AES
mode, enable this
+ * section of code.
+ * if(IS_UNDER_11N_AES_MODE(Adapter))
+ * {
+ * posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
+ * } else
+ * {
+ * posRT2RTAgg->Octet[5] &= 0xfb;
+ * }
+ */
#else
// Do Nothing
@@ -786,7 +786,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device
*ieee, u8 *posRT2RTAgg,
* u8* pOperateMCS //A pointer to MCS rate
bitmap
* return: always we return true
* notice:
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
@@ -832,16 +832,16 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee,
u8 *pOperateMCS)
}
/*
-* Description:
-* This function will get the highest speed rate in input MCS set.
-*
-* /param Adapter Pionter to Adapter entity
-* pMCSRateSet Pointer to MCS rate bitmap
-* pMCSFilter Pointer to MCS rate filter
-*
-* /return Highest MCS rate included in pMCSRateSet and filtered by
pMCSFilter.
-*
-*/
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
+ *
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
+ *
+ * /return Highest MCS rate included in pMCSRateSet and filtered by
pMCSFilter.
+ *
+ */
/********************************************************************************************************************
*function: This function will get the highest speed rate in input MCS set.
* input: struct ieee80211_device* ieee
@@ -849,7 +849,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8
*pOperateMCS)
* u8* pMCSFilter //Pointer to MCS rate filter
* return: Highest MCS rate included in pMCSRateSet and filtered by
pMCSFilter
* notice:
- *
*****************************************************************************************************************/
+
******************************************************************************************************************/
u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8
*pMCSFilter)
{
u8 i, j;
@@ -894,14 +894,14 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8
*pMCSRateSet, u8 *pMCSF
/*
-**
-**1.Filter our operation rate set with AP's rate set
-**2.shall reference channel bandwidth, STBC, Antenna number
-**3.generate rate adative table for firmware
-**David 20060906
-**
-** \pHTSupportedCap: the connected STA's supported rate Capability element
-*/
+ *
+ *1.Filter our operation rate set with AP's rate set
+ *2.shall reference channel bandwidth, STBC, Antenna number
+ *3.generate rate adative table for firmware
+ *David 20060906
+ *
+ * \pHTSupportedCap: the connected STA's supported rate Capability element
+ */
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
@@ -1117,7 +1117,7 @@ void HTSetConnectBwModeCallback(struct ieee80211_device
*ieee);
* output: none
* return: none
* notice: This function is called when * (1) MPInitialization Phase * (2)
Receiving of Deauthentication from AP
-********************************************************************************************************************/
+
********************************************************************************************************************/
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
@@ -1186,7 +1186,7 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
* output: none
* return: none
* notice: This function is called when initialize network structure
-********************************************************************************************************************/
+
********************************************************************************************************************/
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
@@ -1208,7 +1208,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
* output: none
* return: none
* notice: This function should ONLY be called before association
-********************************************************************************************************************/
+
********************************************************************************************************************/
void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct
ieee80211_network *pNetwork)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1320,7 +1320,7 @@ EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
* output: none
* return: return true if HT control field exists(false otherwise)
* notice:
-********************************************************************************************************************/
+
********************************************************************************************************************/
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
if (ieee->pHTInfo->bCurrentHTSupport)
--
2.11.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
