On Tue, Feb 28, 2017 at 06:12:35PM +1300, Derek Robson wrote:
> Fixed style of block comments
> Found using checkpatch
>
> Signed-off-by: Derek Robson <robso...@gmail.com>
> ---
> Version #1 introduced lines over 80.
> This version moves comments to be above the line of code.
>
>
> drivers/staging/rtl8712/rtl871x_mp_ioctl.h | 173
> ++++++++++++++++-------------
> 1 file changed, 98 insertions(+), 75 deletions(-)
>
> diff --git a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
> b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
> index 1102451a733d..d8b443b08bba 100644
> --- a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
> +++ b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
> @@ -150,83 +150,105 @@ uint oid_rt_get_power_mode_hdl(
> #ifdef _RTL871X_MP_IOCTL_C_ /* CAUTION!!! */
> /* This ifdef _MUST_ be left in!! */
> static const struct oid_obj_priv oid_rtl_seg_81_80_00[] = {
> - {1, oid_null_function}, /*0x00 OID_RT_PRO_RESET_DUT */
> - {1, oid_rt_pro_set_data_rate_hdl}, /*0x01*/
> - {1, oid_rt_pro_start_test_hdl}, /*0x02*/
> - {1, oid_rt_pro_stop_test_hdl}, /*0x03*/
> - {1, oid_null_function}, /*0x04 OID_RT_PRO_SET_PREAMBLE*/
> - {1, oid_null_function}, /*0x05 OID_RT_PRO_SET_SCRAMBLER*/
> - {1, oid_null_function}, /*0x06 OID_RT_PRO_SET_FILTER_BB*/
> - {1, oid_null_function}, /*0x07
> - * OID_RT_PRO_SET_MANUAL_DIVERS_BB
> - */
> - {1, oid_rt_pro_set_channel_direct_call_hdl}, /*0x08*/
> - {1, oid_null_function}, /*0x09
> - * OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL
> - */
> - {1, oid_null_function}, /*0x0A
> - * OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL
> - */
> - {1, oid_rt_pro_set_continuous_tx_hdl}, /*0x0B
> - * OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL
> - */
> - {1, oid_rt_pro_set_single_carrier_tx_hdl}, /*0x0C
> - * OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS
> - */
> - {1, oid_null_function}, /*0x0D
> - * OID_RT_PRO_SET_TX_ANTENNA_BB
> - */
> - {1, oid_rt_pro_set_antenna_bb_hdl}, /*0x0E*/
> - {1, oid_null_function}, /*0x0F OID_RT_PRO_SET_CR_SCRAMBLER*/
> - {1, oid_null_function}, /*0x10 OID_RT_PRO_SET_CR_NEW_FILTER*/
> - {1, oid_rt_pro_set_tx_power_control_hdl}, /*0x11
> - * OID_RT_PRO_SET_TX_POWER_CONTROL
> - */
> - {1, oid_null_function}, /*0x12 OID_RT_PRO_SET_CR_TX_CONFIG*/
> - {1, oid_null_function}, /*0x13
> - * OID_RT_PRO_GET_TX_POWER_CONTROL
> - */
> - {1, oid_null_function}, /*0x14
> - * OID_RT_PRO_GET_CR_SIGNAL_QUALITY
> - */
> - {1, oid_null_function}, /*0x15 OID_RT_PRO_SET_CR_SETPOINT*/
> - {1, oid_null_function}, /*0x16 OID_RT_PRO_SET_INTEGRATOR*/
> - {1, oid_null_function}, /*0x17 OID_RT_PRO_SET_SIGNAL_QUALITY*/
> - {1, oid_null_function}, /*0x18 OID_RT_PRO_GET_INTEGRATOR*/
> - {1, oid_null_function}, /*0x19 OID_RT_PRO_GET_SIGNAL_QUALITY*/
> - {1, oid_null_function}, /*0x1A OID_RT_PRO_QUERY_EEPROM_TYPE*/
> - {1, oid_null_function}, /*0x1B OID_RT_PRO_WRITE_MAC_ADDRESS*/
> - {1, oid_null_function}, /*0x1C OID_RT_PRO_READ_MAC_ADDRESS*/
> - {1, oid_null_function}, /*0x1D OID_RT_PRO_WRITE_CIS_DATA*/
> - {1, oid_null_function}, /*0x1E OID_RT_PRO_READ_CIS_DATA*/
> - {1, oid_null_function} /*0x1F OID_RT_PRO_WRITE_POWER_CONTROL*/
> + /*0x00 OID_RT_PRO_RESET_DUT */
Please always put a ' ' in the comment after and before the '*'. This
should look like:
/* 0x00 OID_RT_PRO_RESET_DUT */
And this:
> + /*0x04 OID_RT_PRO_SET_PREAMBLE*/
Should look like:
/* 0x04 OID_RT_PRO_SET_PREAMBLE */
thanks,
greg k-h
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
