The fusb302 port-controller relies on an external device doing USB2
charger-type detection.
The Intel Whiskey Cove PMIC with which the fusb302 is combined on some
X86/ACPI platforms already has a charger-type detection driver which
uses extcon to communicate the detected charger-type.
This commit uses the tcpm_get_usb2_current_limit_extcon helper to enable
USB2 charger detection on these systems. Note that the "fcs,extcon-name"
property name is only for kernel internal use by X86/ACPI platform code
and as such is NOT documented in the devicetree bindings.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
drivers/staging/typec/fusb302/fusb302.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/staging/typec/fusb302/fusb302.c
b/drivers/staging/typec/fusb302/fusb302.c
index be454b5ff6c7..1d8c9b66df2f 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1201,6 +1201,8 @@ static void init_tcpc_dev(struct tcpc_dev
*fusb302_tcpc_dev)
{
fusb302_tcpc_dev->init = tcpm_init;
fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
+ fusb302_tcpc_dev->get_usb2_current_limit =
+ tcpm_get_usb2_current_limit_extcon;
fusb302_tcpc_dev->set_cc = tcpm_set_cc;
fusb302_tcpc_dev->get_cc = tcpm_get_cc;
fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
@@ -1685,6 +1687,7 @@ static int fusb302_probe(struct i2c_client *client,
struct fusb302_chip *chip;
struct i2c_adapter *adapter;
struct device *dev = &client->dev;
+ const char *name;
int ret = 0;
u32 val;
@@ -1717,6 +1720,19 @@ static int fusb302_probe(struct i2c_client *client,
if (device_property_read_u32(dev, "fcs,operating-snk-mw", &val) == 0)
chip->tcpc_config.operating_snk_mw = val;
+ /*
+ * Devicetree platforms should get extcon via phandle (not yet
+ * supported). On ACPI platforms, we get the name from a device prop.
+ * This device prop is for kernel internal use only and is expected
+ * to be set by the platform code which also registers the i2c client
+ * for the fusb302.
+ */
+ if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) {
+ chip->tcpc_dev.usb2_extcon = extcon_get_extcon_dev(name);
+ if (!chip->tcpc_dev.usb2_extcon)
+ return -EPROBE_DEFER;
+ }
+
ret = fusb302_debugfs_init(chip);
if (ret < 0)
return ret;
--
2.13.3
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
