Hi Ajay,
On 16.02.2018 17:11, Ajay Singh wrote:
> Refactor sdio_clear_int_ext() function to remove "Too many leading tabs"
> warning reported by checkpatch.pl script.
>
> Signed-off-by: Ajay Singh <ajay.kat...@microchip.com>
> ---
> drivers/staging/wilc1000/wilc_sdio.c | 134
> +++++++++++++++++------------------
> 1 file changed, 65 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/wilc_sdio.c
> b/drivers/staging/wilc1000/wilc_sdio.c
> index 6ce9c94..27ec90e 100644
> --- a/drivers/staging/wilc1000/wilc_sdio.c
> +++ b/drivers/staging/wilc1000/wilc_sdio.c
> @@ -871,6 +871,7 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32 val)
> {
> struct sdio_func *func = dev_to_sdio_func(wilc->dev);
> int ret;
> + int vmm_ctl;
>
> if (g_sdio.has_thrpt_enh3) {
> u32 reg;
> @@ -909,84 +910,79 @@ static int sdio_clear_int_ext(struct wilc *wilc, u32
> val)
> goto _fail_;
> }
> }
> - } else {
> - if (g_sdio.irq_gpio) {
> - /* see below. has_thrpt_enh2 uses register 0xf8 to
> clear interrupts. */
> - /* Cannot clear multiple interrupts. Must clear each
> interrupt individually */
> - u32 flags;
> -
> - flags = val & (BIT(MAX_NUM_INT) - 1);
> - if (flags) {
> - int i;
> -
> - ret = 1;
> - for (i = 0; i < g_sdio.nint; i++) {
> - if (flags & 1) {
> - struct sdio_cmd52 cmd;
> -
> - cmd.read_write = 1;
> - cmd.function = 0;
> - cmd.raw = 0;
> - cmd.address = 0xf8;
> - cmd.data = BIT(i);
> -
> - ret = wilc_sdio_cmd52(wilc,
> &cmd);
> - if (ret) {
> - dev_err(&func->dev,
> - "Failed cmd52,
> set 0xf8 data (%d) ...\n",
> - __LINE__);
> - goto _fail_;
> - }
> + return 1;
> + }> + if (g_sdio.irq_gpio) {
Since you re-factor this, as I suggested in patch:
"[PATCH 6/6] staging: wilc1000: fix line over 80 chars in
wilc_spi_clear_int_ext()" form your previous series:
"fix line over 80 char & coding style in wilc_spi.c",
for code starting here:
> + /* see below. has_thrpt_enh2 uses register 0xf8 to clear
> interrupts. */
> + /* Cannot clear multiple interrupts. Must clear each interrupt
> individually */
> + u32 flags;
> +
> + flags = val & (BIT(MAX_NUM_INT) - 1);
> + if (flags) {
> + int i;
> +
> + ret = 1;
> + for (i = 0; i < g_sdio.nint; i++) {
> + if (flags & 1) {
> + struct sdio_cmd52 cmd;
> +
> + cmd.read_write = 1;
> + cmd.function = 0;
> + cmd.raw = 0;
> + cmd.address = 0xf8;
> + cmd.data = BIT(i);
> +
> + ret = wilc_sdio_cmd52(wilc, &cmd);
> + if (ret) {
> + dev_err(&func->dev,
> + "Failed cmd52, set 0xf8
> data (%d) ...\n",
> + __LINE__);
> + goto _fail_;
> }
> - if (!ret)
> - break;
> - flags >>= 1;
> }
> if (!ret)
> - goto _fail_;
> - for (i = g_sdio.nint; i < MAX_NUM_INT; i++) {
> - if (flags & 1)
> - dev_err(&func->dev,
> - "Unexpected interrupt
> cleared %d...\n",
> - i);
> - flags >>= 1;
> - }
> + break;
> + flags >>= 1;
> }
and ending here, further improvements could be done. Since the current series
was accepted, maybe add these to a todo list and review them later?
> - }
> -
> - {
> - u32 vmm_ctl;
> -
> - vmm_ctl = 0;
> - /* select VMM table 0 */
> - if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
> - vmm_ctl |= BIT(0);
> - /* select VMM table 1 */
> - if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
> - vmm_ctl |= BIT(1);
> - /* enable VMM */
> - if ((val & EN_VMM) == EN_VMM)
> - vmm_ctl |= BIT(2);
> -
> - if (vmm_ctl) {
> - struct sdio_cmd52 cmd;
> -
> - cmd.read_write = 1;
> - cmd.function = 0;
> - cmd.raw = 0;
> - cmd.address = 0xf6;
> - cmd.data = vmm_ctl;
> - ret = wilc_sdio_cmd52(wilc, &cmd);
> - if (ret) {
> + if (!ret)
> + goto _fail_;
> + for (i = g_sdio.nint; i < MAX_NUM_INT; i++) {
> + if (flags & 1)
> dev_err(&func->dev,
> - "Failed cmd52, set 0xf6 data
> (%d) ...\n",
> - __LINE__);
> - goto _fail_;
> - }
> + "Unexpected interrupt cleared
> %d...\n",
> + i);
> + flags >>= 1;
> }
> }
> }
>
> + vmm_ctl = 0;
> + /* select VMM table 0 */
> + if ((val & SEL_VMM_TBL0) == SEL_VMM_TBL0)
> + vmm_ctl |= BIT(0);
> + /* select VMM table 1 */
> + if ((val & SEL_VMM_TBL1) == SEL_VMM_TBL1)
> + vmm_ctl |= BIT(1);
> + /* enable VMM */
> + if ((val & EN_VMM) == EN_VMM)
> + vmm_ctl |= BIT(2);
> +
> + if (vmm_ctl) {
> + struct sdio_cmd52 cmd;
> +
> + cmd.read_write = 1;
> + cmd.function = 0;
> + cmd.raw = 0;
> + cmd.address = 0xf6;
> + cmd.data = vmm_ctl;
> + ret = wilc_sdio_cmd52(wilc, &cmd);
> + if (ret) {
> + dev_err(&func->dev,
> + "Failed cmd52, set 0xf6 data (%d) ...\n",
> + __LINE__);
> + goto _fail_;
> + }
> + }
> return 1;
> _fail_:
> return 0;
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
