On Wed, 21 Mar 2018 06:29:10 -0400
Brian Masney <masn...@onstation.org> wrote:
> Remove the ch0 and ch1 variables from tsl2x7x_get_lux() and
> write those values directly into the chip->als_cur_info.als_ch0
> and chip->als_cur_info.als_ch01 variables.
>
> Signed-off-by: Brian Masney <masn...@onstation.org>
Hmm. A marginal improvement in readability I suppose, but not a big one.
This I wouldn't have bothered changing but fair enough.
Applied to the togreg branch of iio.git and pushed out as testing.
Thanks,
Jonathan
> ---
> drivers/staging/iio/light/tsl2x7x.c | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2x7x.c
> b/drivers/staging/iio/light/tsl2x7x.c
> index 1e38e8449f9e..65b7fbca8c5d 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -336,7 +336,6 @@ static int tsl2x7x_write_control_reg(struct tsl2X7X_chip
> *chip, u8 data)
> */
> static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> {
> - u16 ch0, ch1; /* separated ch0/ch1 data from device */
> u32 lux; /* raw lux calculated from device data */
> u64 lux64;
> u32 ratio;
> @@ -382,24 +381,24 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> }
>
> /* extract ALS/lux data */
> - ch0 = le16_to_cpup((const __le16 *)&buf[0]);
> - ch1 = le16_to_cpup((const __le16 *)&buf[2]);
> + chip->als_cur_info.als_ch0 = le16_to_cpup((const __le16 *)&buf[0]);
> + chip->als_cur_info.als_ch1 = le16_to_cpup((const __le16 *)&buf[2]);
>
> - chip->als_cur_info.als_ch0 = ch0;
> - chip->als_cur_info.als_ch1 = ch1;
> -
> - if (ch0 >= chip->als_saturation || ch1 >= chip->als_saturation) {
> + if (chip->als_cur_info.als_ch0 >= chip->als_saturation ||
> + chip->als_cur_info.als_ch1 >= chip->als_saturation) {
> lux = TSL2X7X_LUX_CALC_OVER_FLOW;
> goto return_max;
> }
>
> - if (!ch0) {
> + if (!chip->als_cur_info.als_ch0) {
> /* have no data, so return LAST VALUE */
> ret = chip->als_cur_info.lux;
> goto out_unlock;
> }
> +
> /* calculate ratio */
> - ratio = (ch1 << 15) / ch0;
> + ratio = (chip->als_cur_info.als_ch1 << 15) / chip->als_cur_info.als_ch0;
> +
> /* convert to unscaled lux using the pointer to the table */
> p = (struct tsl2x7x_lux *)chip->tsl2x7x_device_lux;
> while (p->ratio != 0 && p->ratio < ratio)
> @@ -408,9 +407,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
> if (p->ratio == 0) {
> lux = 0;
> } else {
> - lux = DIV_ROUND_UP(ch0 * p->ch0,
> + lux = DIV_ROUND_UP(chip->als_cur_info.als_ch0 * p->ch0,
> tsl2x7x_als_gain[chip->settings.als_gain]) -
> - DIV_ROUND_UP(ch1 * p->ch1,
> + DIV_ROUND_UP(chip->als_cur_info.als_ch1 * p->ch1,
> tsl2x7x_als_gain[chip->settings.als_gain]);
> }
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
