Code currently defines:
#define CONFIG_PCIE_PORT0
#define CONFIG_PCIE_PORT1
#define CONFIG_PCIE_PORT2
#define GPIO_PERST
and then compiles code only if they are defined.
We might want to disable some of these via devicetree one
day, but for now just remove the #defines and the
conditions - all the code for different ports is
easy to identify.
Signed-off-by: NeilBrown <n...@brown.name>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 70 +++++++------------------------
1 file changed, 15 insertions(+), 55 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index c8d7b47c8952..616960e01052 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -64,9 +64,6 @@ extern void chk_phy_pll(void);
* devices.
*/
-#define CONFIG_PCIE_PORT0
-#define CONFIG_PCIE_PORT1
-#define CONFIG_PCIE_PORT2
#define RALINK_PCIE0_CLK_EN (1<<24)
#define RALINK_PCIE1_CLK_EN (1<<25)
#define RALINK_PCIE2_CLK_EN (1<<26)
@@ -140,7 +137,7 @@ extern void chk_phy_pll(void);
#define RALINK_PCI_IO_MAP_BASE 0x1e160000
#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
-#define GPIO_PERST
+
#define ASSERT_SYSRST_PCIE(val) \
do { \
if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
@@ -392,21 +389,15 @@ set_pcie_phy(u32 *addr, int start_b, int bits, int val)
void
bypass_pipe_rst(void)
{
-#if defined (CONFIG_PCIE_PORT0)
/* PCIe Port 0 */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1,
0x01); // rg_pe1_pipe_rst_b
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1,
0x01); // rg_pe1_pipe_cmd_frc[4]
-#endif
-#if defined (CONFIG_PCIE_PORT1)
/* PCIe Port 1 */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1,
0x01); // rg_pe1_pipe_rst_b
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1,
0x01); // rg_pe1_pipe_cmd_frc[4]
-#endif
-#if defined (CONFIG_PCIE_PORT2)
/* PCIe Port 2 */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1,
0x01); // rg_pe1_pipe_rst_b
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1,
0x01); // rg_pe1_pipe_cmd_frc[4]
-#endif
}
void
@@ -415,7 +406,6 @@ set_phy_for_ssc(void)
unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
reg = (reg >> 6) & 0x7;
-#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
/* Set PCIe Port0 & Port1 PHY to disable SSC */
/* Debug Xtal Type */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1,
0x01); // rg_pe1_frc_h_xtal_type
@@ -456,8 +446,7 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1,
0x01); // rg_pe1_phy_en //Port 1 enable
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1,
0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1,
0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
-#endif
-#if defined (CONFIG_PCIE_PORT2)
+
/* Set PCIe Port2 PHY to disable SSC */
/* Debug Xtal Type */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1,
0x01); // rg_pe1_frc_h_xtal_type
@@ -490,7 +479,6 @@ set_phy_for_ssc(void)
/* Enable PHY and disable force mode */
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1,
0x01); // rg_pe1_phy_en //Port 0 enable
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1,
0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-#endif
}
void setup_cm_memory_region(struct resource *mem_resource)
@@ -519,18 +507,13 @@ static int mt7621_pci_probe(struct platform_device *pdev)
ioport_resource.start= 0;
ioport_resource.end = ~0;
-#if defined (CONFIG_PCIE_PORT0)
val = RALINK_PCIE0_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT1)
val |= RALINK_PCIE1_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT2)
val |= RALINK_PCIE2_RST;
-#endif
+
ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST |
RALINK_PCIE2_RST);
printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
+
*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
mdelay(100);
@@ -539,18 +522,11 @@ static int mt7621_pci_probe(struct platform_device *pdev)
*(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7);
// clear DATA
mdelay(100);
-#else
- *(unsigned int *)(0xbe000060) &= ~0x00000c00;
-#endif
-#if defined (CONFIG_PCIE_PORT0)
+
val = RALINK_PCIE0_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT1)
val |= RALINK_PCIE1_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT2)
val |= RALINK_PCIE2_RST;
-#endif
+
DEASSERT_SYSRST_PCIE(val);
printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
@@ -559,18 +535,14 @@ static int mt7621_pci_probe(struct platform_device *pdev)
set_phy_for_ssc();
printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-#if defined (CONFIG_PCIE_PORT0)
read_config(0, 0, 0, 0x70c, &val);
printk("Port 0 N_FTS = %x\n", (unsigned int)val);
-#endif
-#if defined (CONFIG_PCIE_PORT1)
+
read_config(0, 1, 0, 0x70c, &val);
printk("Port 1 N_FTS = %x\n", (unsigned int)val);
-#endif
-#if defined (CONFIG_PCIE_PORT2)
+
read_config(0, 2, 0, 0x70c, &val);
printk("Port 2 N_FTS = %x\n", (unsigned int)val);
-#endif
RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
RALINK_SYSCFG1 &= ~(0x30);
@@ -582,16 +554,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
mdelay(50);
RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
+ /* Use GPIO control instead of PERST_N */
*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;
// set DATA
- mdelay(100);
-#else
- RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
-#endif
- mdelay(500);
+ mdelay(1000);
- mdelay(500);
-#if defined (CONFIG_PCIE_PORT0)
if(( RALINK_PCI0_STATUS & 0x1) == 0)
{
printk("PCIE0 no card, disable it(RST&CLK)\n");
@@ -602,8 +568,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status |= 1<<0;
RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
}
-#endif
-#if defined (CONFIG_PCIE_PORT1)
+
if(( RALINK_PCI1_STATUS & 0x1) == 0)
{
printk("PCIE1 no card, disable it(RST&CLK)\n");
@@ -614,8 +579,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status |= 1<<1;
RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
}
-#endif
-#if defined (CONFIG_PCIE_PORT2)
+
if (( RALINK_PCI2_STATUS & 0x1) == 0) {
printk("PCIE2 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
@@ -625,7 +589,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
pcie_link_status |= 1<<2;
RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
}
-#endif
+
if (pcie_link_status == 0)
return 0;
@@ -676,7 +640,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
-#if defined (CONFIG_PCIE_PORT0)
//PCIe0
if((pcie_link_status & 0x1) != 0) {
RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G;
ENABLE
@@ -684,8 +647,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
RALINK_PCI0_CLASS = 0x06040001;
printk("PCIE0 enabled\n");
}
-#endif
-#if defined (CONFIG_PCIE_PORT1)
+
//PCIe1
if ((pcie_link_status & 0x2) != 0) {
RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G;
ENABLE
@@ -693,8 +655,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
RALINK_PCI1_CLASS = 0x06040001;
printk("PCIE1 enabled\n");
}
-#endif
-#if defined (CONFIG_PCIE_PORT2)
+
//PCIe2
if ((pcie_link_status & 0x4) != 0) {
RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G;
ENABLE
@@ -702,7 +663,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
RALINK_PCI2_CLASS = 0x06040001;
printk("PCIE2 enabled\n");
}
-#endif
switch(pcie_link_status) {
case 7:
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
