On Mon, 2018-05-07 at 17:21 +0100, Rui Miguel Silva wrote:
> This patch adds the device tree nodes for csi, video multiplexer and mipi-csi
> besides the graph connecting the necessary endpoints to make the media capture
> entities to work in imx7 Warp board.
>
> Also add the pin control related with the mipi_csi in that board.
>
> Signed-off-by: Rui Miguel Silva <rui.si...@linaro.org>
> ---
> arch/arm/boot/dts/imx7s-warp.dts | 78 ++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx7s.dtsi | 28 ++++++++++++
> 2 files changed, 106 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7s-warp.dts
> b/arch/arm/boot/dts/imx7s-warp.dts
> index 8a30b148534d..ffd170ae925a 100644
> --- a/arch/arm/boot/dts/imx7s-warp.dts
> +++ b/arch/arm/boot/dts/imx7s-warp.dts
> @@ -310,6 +310,77 @@
> status = "okay";
> };
>
> +&gpr {
> + csi_mux {
> + compatible = "video-mux";
> + mux-controls = <&mux 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + csi_mux_from_parallel_sensor: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + csi_mux_from_mipi_vc0: endpoint {
> + remote-endpoint = <&mipi_vc0_to_csi_mux>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + csi_mux_to_csi: endpoint {
> + remote-endpoint = <&csi_from_csi_mux>;
> + };
> + };
> + };
> +};
> +
> +&csi {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
Same comment as for the binding docs, since the CSI only has one port,
it doesn't have to be numbered.
> +
> + csi_from_csi_mux: endpoint {
> + remote-endpoint = <&csi_mux_to_csi>;
> + };
> + };
> +};
> +
> +&mipi_csi {
> + clock-frequency = <166000000>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + fsl,csis-hs-settle = <3>;
> +
> + port@0 {
> + reg = <0>;
> +
> + mipi_from_sensor: endpoint {
> + remote-endpoint = <&ov2680_to_mipi>;
> + data-lanes = <1>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + mipi_vc0_to_csi_mux: endpoint {
> + remote-endpoint = <&csi_mux_from_mipi_vc0>;
> + };
> + };
> +};
> +
> &wdog1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -357,6 +428,13 @@
> >;
> };
>
> + pinctrl_mipi_csi: mipi_csi {
> + fsl,pins = <
> + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14
This is the ov2680 reset GPIO? I think this belongs into patch 12.
> + MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x14
What is this GPIO used for?
> + >;
> + };
> +
> pinctrl_sai1: sai1grp {
> fsl,pins = <
> MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index 3590dab529f9..0bae41f2944c 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -46,6 +46,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/reset/imx7-reset.h>
> #include "imx7d-pinfunc.h"
>
> / {
> @@ -738,6 +739,17 @@
> status = "disabled";
> };
>
> + csi: csi@30710000 {
> + compatible = "fsl,imx7-csi";
> + reg = <0x30710000 0x10000>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
> + <&clks IMX7D_CLK_DUMMY>;
> + clock-names = "axi", "mclk", "dcic";
> + status = "disabled";
> + };
> +
> lcdif: lcdif@30730000 {
> compatible = "fsl,imx7d-lcdif",
> "fsl,imx28-lcdif";
> reg = <0x30730000 0x10000>;
> @@ -747,6 +759,22 @@
> clock-names = "pix", "axi";
> status = "disabled";
> };
> +
> + mipi_csi: mipi-csi@30750000 {
> + compatible = "fsl,imx7-mipi-csi2";
> + reg = <0x30750000 0x10000>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_IPG_ROOT_CLK>,
> + <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
> + <&clks
> IMX7D_MIPI_DPHY_ROOT_CLK>;
> + clock-names = "pclk", "wrap", "phy";
> + power-domains = <&pgc_mipi_phy>;
> + phy-supply = <®_1p0d>;
> + resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
> + reset-names = "mrst";
> + bus-width = <2>;
> + status = "disabled";
> + };
> };
>
> aips3: aips-bus@30800000 {
regards
Philipp
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
