It's based off the driver from the OLPC kernel sources. Somewhat
modernized and cleaned up, for better or worse.
Modified to plug into the olpc-ec driver infrastructure (so that battery
interface and debugfs could be reused) and the SPI slave framework.
Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
---
drivers/platform/olpc/Kconfig | 15 +
drivers/platform/olpc/Makefile | 1 +
drivers/platform/olpc/olpc-xo175-ec.c | 755 ++++++++++++++++++++++++++
3 files changed, 771 insertions(+)
create mode 100644 drivers/platform/olpc/olpc-xo175-ec.c
diff --git a/drivers/platform/olpc/Kconfig b/drivers/platform/olpc/Kconfig
index 7b736c9e67ac..7c643d24ad0f 100644
--- a/drivers/platform/olpc/Kconfig
+++ b/drivers/platform/olpc/Kconfig
@@ -9,3 +9,18 @@ config OLPC
help
Add support for detecting the unique features of the OLPC
XO hardware.
+
+if OLPC
+
+config OLPC_XO175_EC
+ tristate "OLPC XO 1.75 Embedded Controller"
+ depends on ARCH_MMP || COMPILE_TEST
+ select SPI_SLAVE
+ help
+ Include support for the OLPC XO Embedded Controller (EC). The EC
+ provides various platform services, including support for the power,
+ button, restart, shutdown and battery charging status.
+
+ Unless you have an OLPC XO laptop, you will want to say N.
+
+endif
diff --git a/drivers/platform/olpc/Makefile b/drivers/platform/olpc/Makefile
index dc8b26bc7209..5b43f383289e 100644
--- a/drivers/platform/olpc/Makefile
+++ b/drivers/platform/olpc/Makefile
@@ -2,3 +2,4 @@
# OLPC XO platform-specific drivers
#
obj-$(CONFIG_OLPC) += olpc-ec.o
+obj-$(CONFIG_OLPC_XO175_EC) += olpc-xo175-ec.o
diff --git a/drivers/platform/olpc/olpc-xo175-ec.c
b/drivers/platform/olpc/olpc-xo175-ec.c
new file mode 100644
index 000000000000..6333a1366730
--- /dev/null
+++ b/drivers/platform/olpc/olpc-xo175-ec.c
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the OLPC XO-1.75 Embedded Controller.
+ *
+ * The EC protocol is documented at:
+ * http://wiki.laptop.org/go/XO_1.75_HOST_to_EC_Protocol
+ *
+ * Copyright (C) 2010 One Laptop per Child Foundation.
+ * Copyright (C) 2018 Lubomir Rintel <lkund...@v3.sk>
+ */
+
+#include <asm/system_misc.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/ctype.h>
+#include <linux/olpc-ec.h>
+#include <linux/spi/spi.h>
+#include <linux/reboot.h>
+#include <linux/input.h>
+#include <linux/kfifo.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+
+struct ec_cmd_t {
+ u8 cmd;
+ u8 bytes_returned;
+};
+
+enum ec_chan_t {
+ CHAN_NONE = 0,
+ CHAN_SWITCH,
+ CHAN_CMD_RESP,
+ CHAN_KEYBOARD,
+ CHAN_TOUCHPAD,
+ CHAN_EVENT,
+ CHAN_DEBUG,
+ CHAN_CMD_ERROR,
+};
+
+/*
+ * EC events
+ */
+#define EVENT_AC_CHANGE 1 /* AC plugged/unplugged */
+#define EVENT_BATTERY_STATUS 2 /* Battery low/full/error/gone */
+#define EVENT_BATTERY_CRITICAL 3 /* Battery critical voltage */
+#define EVENT_BATTERY_SOC_CHANGE 4 /* 1% SOC Change */
+#define EVENT_BATTERY_ERROR 5 /* Abnormal error, query for cause */
+#define EVENT_POWER_PRESSED 6 /* Power button was pressed */
+#define EVENT_POWER_PRESS_WAKE 7 /* Woken up with a power button */
+#define EVENT_TIMED_HOST_WAKE 8 /* Host wake timer */
+#define EVENT_OLS_HIGH_LIMIT 9 /* OLS crossed dark threshold */
+#define EVENT_OLS_LOW_LIMIT 10 /* OLS crossed light threshold */
+
+/*
+ * EC commands
+ * (from http://dev.laptop.org/git/users/rsmith/ec-1.75/tree/ec_cmd.h)
+ */
+#define CMD_GET_API_VERSION 0x08 /* out: u8 */
+#define CMD_READ_VOLTAGE 0x10 /* out: u16, *9.76/32, mV */
+#define CMD_READ_CURRENT 0x11 /* out: s16, *15.625/120, mA */
+#define CMD_READ_ACR 0x12 /* out: s16, *6250/15, uAh */
+#define CMD_READ_BATT_TEMPERATURE 0x13 /* out: u16, *100/256, deg C */
+#define CMD_READ_AMBIENT_TEMPERATURE 0x14 /* unimplemented, no hardware */
+#define CMD_READ_BATTERY_STATUS 0x15 /* out: u8, bitmask */
+#define CMD_READ_SOC 0x16 /* out: u8, percentage */
+#define CMD_READ_GAUGE_ID 0x17 /* out: u8 * 8 */
+#define CMD_READ_GAUGE_DATA 0x18 /* in: u8 addr, out: u8 data */
+#define CMD_READ_BOARD_ID 0x19 /* out: u16 (platform id) */
+#define CMD_READ_BATT_ERR_CODE 0x1f /* out: u8, error bitmask */
+#define CMD_SET_DCON_POWER 0x26 /* in: u8 */
+#define CMD_RESET_EC 0x28 /* none */
+#define CMD_READ_BATTERY_TYPE 0x2c /* out: u8 */
+#define CMD_SET_AUTOWAK 0x33 /* out: u8 */
+#define CMD_SET_EC_WAKEUP_TIMER 0x36 /* in: u32, out: ? */
+#define CMD_READ_EXT_SCI_MASK 0x37 /* ? */
+#define CMD_WRITE_EXT_SCI_MASK 0x38 /* ? */
+#define CMD_CLEAR_EC_WAKEUP_TIMER 0x39 /* none */
+#define CMD_ENABLE_RUNIN_DISCHARGE 0x3B /* none */
+#define CMD_DISABLE_RUNIN_DISCHARGE 0x3C /* none */
+#define CMD_READ_MPPT_ACTIVE 0x3d /* out: u8 */
+#define CMD_READ_MPPT_LIMIT 0x3e /* out: u8 */
+#define CMD_SET_MPPT_LIMIT 0x3f /* in: u8 */
+#define CMD_DISABLE_MPPT 0x40 /* none */
+#define CMD_ENABLE_MPPT 0x41 /* none */
+#define CMD_READ_VIN 0x42 /* out: u16 */
+#define CMD_EXT_SCI_QUERY 0x43 /* ? */
+#define RSP_KEYBOARD_DATA 0x48 /* ? */
+#define RSP_TOUCHPAD_DATA 0x49 /* ? */
+#define CMD_GET_FW_VERSION 0x4a /* out: u8 * 16 */
+#define CMD_POWER_CYCLE 0x4b /* none */
+#define CMD_POWER_OFF 0x4c /* none */
+#define CMD_RESET_EC_SOFT 0x4d /* none */
+#define CMD_READ_GAUGE_U16 0x4e /* ? */
+#define CMD_ENABLE_MOUSE 0x4f /* ? */
+#define CMD_ECHO 0x52 /* in: u8 * 5, out: u8 * 5 */
+#define CMD_GET_FW_DATE 0x53 /* out: u8 * 16 */
+#define CMD_GET_FW_USER 0x54 /* out: u8 * 16 */
+#define CMD_TURN_OFF_POWER 0x55 /* none (same as 0x4c) */
+#define CMD_READ_OLS 0x56 /* out: u16 */
+#define CMD_OLS_SMT_LEDON 0x57 /* none */
+#define CMD_OLS_SMT_LEDOFF 0x58 /* none */
+#define CMD_START_OLS_ASSY 0x59 /* none */
+#define CMD_STOP_OLS_ASSY 0x5a /* none */
+#define CMD_OLS_SMTTEST_STOP 0x5b /* none */
+#define CMD_READ_VIN_SCALED 0x5c /* out: u16 */
+#define CMD_READ_BAT_MIN_W 0x5d /* out: u16 */
+#define CMD_READ_BAR_MAX_W 0x5e /* out: u16 */
+#define CMD_RESET_BAT_MINMAX_W 0x5f /* none */
+#define CMD_READ_LOCATION 0x60 /* in: u16 addr, out: u8 data */
+#define CMD_WRITE_LOCATION 0x61 /* in: u16 addr, u8 data */
+#define CMD_KEYBOARD_CMD 0x62 /* in: u8, out: ? */
+#define CMD_TOUCHPAD_CMD 0x63 /* in: u8, out: ? */
+#define CMD_GET_FW_HASH 0x64 /* out: u8 * 16 */
+#define CMD_SUSPEND_HINT 0x65 /* in: u8 */
+#define CMD_ENABLE_WAKE_TIMER 0x66 /* in: u8 */
+#define CMD_SET_WAKE_TIMER 0x67 /* in: 32 */
+#define CMD_ENABLE_WAKE_AUTORESET 0x68 /* in: u8 */
+#define CMD_OLS_SET_LIMITS 0x69 /* in: u16, u16 */
+#define CMD_OLS_GET_LIMITS 0x6a /* out: u16, u16 */
+#define CMD_OLS_SET_CEILING 0x6b /* in: u16 */
+#define CMD_OLS_GET_CEILING 0x6c /* out: u16 */
+
+/*
+ * Accepted EC commands, and how many bytes they return. There are plenty
+ * of EC commands that are no longer implemented, or are implemented only on
+ * certain older boards.
+ */
+static const struct ec_cmd_t olpc_xo175_ec_cmds[] = {
+ { CMD_GET_API_VERSION, 1 },
+ { CMD_READ_VOLTAGE, 2 },
+ { CMD_READ_CURRENT, 2 },
+ { CMD_READ_ACR, 2 },
+ { CMD_READ_BATT_TEMPERATURE, 2 },
+ { CMD_READ_BATTERY_STATUS, 1 },
+ { CMD_READ_SOC, 1 },
+ { CMD_READ_GAUGE_ID, 8 },
+ { CMD_READ_GAUGE_DATA, 1 },
+ { CMD_READ_BOARD_ID, 2 },
+ { CMD_READ_BATT_ERR_CODE, 1 },
+ { CMD_SET_DCON_POWER, 0 },
+ { CMD_RESET_EC, 0 },
+ { CMD_READ_BATTERY_TYPE, 1 },
+ { CMD_ENABLE_RUNIN_DISCHARGE, 0 },
+ { CMD_DISABLE_RUNIN_DISCHARGE, 0 },
+ { CMD_READ_MPPT_ACTIVE, 1 },
+ { CMD_READ_MPPT_LIMIT, 1 },
+ { CMD_SET_MPPT_LIMIT, 0 },
+ { CMD_DISABLE_MPPT, 0 },
+ { CMD_ENABLE_MPPT, 0 },
+ { CMD_READ_VIN, 2 },
+ { CMD_GET_FW_VERSION, 16 },
+ { CMD_POWER_CYCLE, 0 },
+ { CMD_POWER_OFF, 0 },
+ { CMD_RESET_EC_SOFT, 0 },
+ { CMD_ECHO, 5 },
+ { CMD_GET_FW_DATE, 16 },
+ { CMD_GET_FW_USER, 16 },
+ { CMD_TURN_OFF_POWER, 0 },
+ { CMD_READ_OLS, 2 },
+ { CMD_OLS_SMT_LEDON, 0 },
+ { CMD_OLS_SMT_LEDOFF, 0 },
+ { CMD_START_OLS_ASSY, 0 },
+ { CMD_STOP_OLS_ASSY, 0 },
+ { CMD_OLS_SMTTEST_STOP, 0 },
+ { CMD_READ_VIN_SCALED, 2 },
+ { CMD_READ_BAT_MIN_W, 2 },
+ { CMD_READ_BAR_MAX_W, 2 },
+ { CMD_RESET_BAT_MINMAX_W, 0 },
+ { CMD_READ_LOCATION, 1 },
+ { CMD_WRITE_LOCATION, 0 },
+ { CMD_GET_FW_HASH, 16 },
+ { CMD_SUSPEND_HINT, 0 },
+ { CMD_ENABLE_WAKE_TIMER, 0 },
+ { CMD_SET_WAKE_TIMER, 0 },
+ { CMD_ENABLE_WAKE_AUTORESET, 0 },
+ { CMD_OLS_SET_LIMITS, 0 },
+ { CMD_OLS_GET_LIMITS, 4 },
+ { CMD_OLS_SET_CEILING, 0 },
+ { CMD_OLS_GET_CEILING, 2 },
+ { CMD_READ_EXT_SCI_MASK, 2 },
+ { CMD_WRITE_EXT_SCI_MASK, 0 },
+
+ { 0 },
+};
+
+#define EC_CMD_LEN 8
+#define EC_MAX_RESP_LEN 16
+#define LOG_BUF_SIZE 127
+
+enum ec_state_t {
+ CMD_STATE_IDLE = 0,
+ CMD_STATE_WAITING_FOR_SWITCH,
+ CMD_STATE_CMD_IN_TX_FIFO,
+ CMD_STATE_CMD_SENT,
+ CMD_STATE_RESP_RECEIVED,
+ CMD_STATE_ERROR_RECEIVED,
+};
+
+struct olpc_xo175_ec {
+ struct spi_device *spi;
+
+ struct spi_transfer xfer;
+ struct spi_message msg;
+
+ u8 tx_buf[EC_CMD_LEN];
+ u8 rx_buf[EC_MAX_RESP_LEN];
+
+ bool suspended;
+
+ /* GPIOs for ACK and CMD signals. */
+ struct gpio_desc *gpio_cmd;
+
+ /* Command handling related state. */
+ spinlock_t cmd_state_lock;
+ int cmd_state;
+ bool cmd_running;
+ struct completion cmd_done;
+ u8 cmd[EC_CMD_LEN];
+ int expected_resp_len;
+ u8 resp[EC_MAX_RESP_LEN];
+ int resp_len;
+
+ /* Power button. */
+ struct input_dev *pwrbtn;
+
+ /* Debug handling. */
+ char logbuf[LOG_BUF_SIZE + 1];
+ int logbuf_len;
+};
+
+static int olpc_xo175_ec_is_valid_cmd(u8 cmd)
+{
+ const struct ec_cmd_t *p;
+
+ for (p = olpc_xo175_ec_cmds; p->cmd; p++) {
+ if (p->cmd == cmd)
+ return p->bytes_returned;
+ }
+
+ return -1;
+}
+
+static void olpc_xo175_ec_flush_logbuf(struct olpc_xo175_ec *priv)
+{
+ priv->logbuf[priv->logbuf_len] = 0;
+ priv->logbuf_len = 0;
+
+ dev_dbg(&priv->spi->dev, "got debug string [%s]\n", priv->logbuf);
+}
+
+static void olpc_xo175_ec_complete(void *arg);
+
+static void olpc_xo175_ec_send_command(struct olpc_xo175_ec *priv, u8 *cmd,
+ size_t cmdlen)
+{
+ int ret;
+
+ memcpy(priv->tx_buf, cmd, cmdlen);
+ priv->xfer.len = cmdlen;
+
+ spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
+
+ priv->msg.complete = olpc_xo175_ec_complete;
+ priv->msg.context = priv;
+
+ ret = spi_async(priv->spi, &priv->msg);
+ if (ret)
+ dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
+}
+
+static void olpc_xo175_ec_read_packet(struct olpc_xo175_ec *priv)
+{
+ u8 nonce[] = {0xA5, 0x5A};
+
+ olpc_xo175_ec_send_command(priv, nonce, sizeof(nonce));
+}
+
+static void olpc_xo175_ec_complete(void *arg)
+{
+ struct olpc_xo175_ec *priv = arg;
+ struct device *dev = &priv->spi->dev;
+ struct power_supply *psy;
+ unsigned long flags;
+ u8 channel;
+ u8 byte;
+ int ret;
+
+ ret = priv->msg.status;
+ if (ret) {
+ dev_err(dev, "SPI transfer failed: %d\n", ret);
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+ if (priv->cmd_running) {
+ priv->resp_len = 0;
+ priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ if (ret != -EINTR)
+ olpc_xo175_ec_read_packet(priv);
+
+ return;
+ }
+
+ channel = priv->rx_buf[0];
+ byte = priv->rx_buf[1];
+
+ switch (channel) {
+ case CHAN_NONE:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ /* We can safely ignore these */
+ dev_err(dev, "spurious FIFO read packet\n");
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+ }
+
+ priv->cmd_state = CMD_STATE_CMD_SENT;
+ if (!priv->expected_resp_len)
+ complete(&priv->cmd_done);
+ olpc_xo175_ec_read_packet(priv);
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+
+ case CHAN_SWITCH:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ /* Just go with the flow */
+ dev_err(dev, "spurious SWITCH packet\n");
+ memset(priv->cmd, 0, sizeof(priv->cmd));
+ priv->cmd[0] = CMD_ECHO;
+ }
+
+ priv->cmd_state = CMD_STATE_CMD_IN_TX_FIFO;
+
+ /* Throw command into TxFIFO */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ olpc_xo175_ec_send_command(priv, priv->cmd, sizeof(priv->cmd));
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ return;
+
+ case CHAN_CMD_RESP:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ dev_err(dev, "spurious response packet\n");
+ } else if (priv->resp_len >= priv->expected_resp_len) {
+ dev_err(dev, "too many response packets\n");
+ } else {
+ priv->resp[priv->resp_len++] = byte;
+
+ if (priv->resp_len == priv->expected_resp_len) {
+ priv->cmd_state = CMD_STATE_RESP_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ }
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ break;
+
+ case CHAN_CMD_ERROR:
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ if (!priv->cmd_running) {
+ dev_err(dev, "spurious cmd error packet\n");
+ } else {
+ priv->resp[0] = byte;
+ priv->resp_len = 1;
+ priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
+ complete(&priv->cmd_done);
+ }
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+ break;
+
+ case CHAN_KEYBOARD:
+ case CHAN_TOUCHPAD:
+ dev_warn(dev, "kbd/tpad not supported\n");
+ break;
+
+ case CHAN_EVENT:
+ dev_dbg(dev, "got event %.2x\n", byte);
+ switch (byte) {
+ case EVENT_AC_CHANGE:
+ psy = power_supply_get_by_name("olpc-ac");
+ if (psy) {
+ power_supply_changed(psy);
+ power_supply_put(psy);
+ }
+ break;
+ case EVENT_BATTERY_STATUS:
+ case EVENT_BATTERY_CRITICAL:
+ case EVENT_BATTERY_SOC_CHANGE:
+ case EVENT_BATTERY_ERROR:
+ psy = power_supply_get_by_name("olpc-battery");
+ if (psy) {
+ power_supply_changed(psy);
+ power_supply_put(psy);
+ }
+ break;
+ case EVENT_POWER_PRESSED:
+ input_report_key(priv->pwrbtn, KEY_POWER, 1);
+ input_sync(priv->pwrbtn);
+ input_report_key(priv->pwrbtn, KEY_POWER, 0);
+ input_sync(priv->pwrbtn);
+ /* fall through */
+ case EVENT_POWER_PRESS_WAKE:
+ case EVENT_TIMED_HOST_WAKE:
+ pm_wakeup_event(priv->pwrbtn->dev.parent, 1000);
+ break;
+ default:
+ /* For now, we just ignore the unknown events. */
+ break;
+ }
+ break;
+
+ case CHAN_DEBUG:
+ if (byte == '\n') {
+ olpc_xo175_ec_flush_logbuf(priv);
+ } else if (isprint(byte)) {
+ priv->logbuf[priv->logbuf_len++] = byte;
+ if (priv->logbuf_len == LOG_BUF_SIZE)
+ olpc_xo175_ec_flush_logbuf(priv);
+ }
+ break;
+
+ default:
+ dev_warn(dev, "unknown channel: %d, %.2x\n", channel, byte);
+ break;
+ }
+
+ /* Most non-command packets get the TxFIFO refilled and an ACK. */
+ olpc_xo175_ec_read_packet(priv);
+}
+
+/*
+ * This function is protected with a mutex. We can safely assume that
+ * there will be only one instance of this function running at a time.
+ * One of the ways in which we enforce this is by waiting until we get
+ * all response bytes back from the EC, rather than just the number that
+ * the caller requests (otherwise, we might start a new command while an
+ * old command's response bytes are still incoming).
+ */
+static int olpc_xo175_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *resp,
+ size_t resp_len, void *ec_cb_arg)
+{
+ struct olpc_xo175_ec *priv = ec_cb_arg;
+ struct device *dev = &priv->spi->dev;
+ unsigned long flags;
+ int nr_bytes;
+ int ret = 0;
+
+ dev_dbg(dev, "CMD %x, %d bytes expected\n", cmd, resp_len);
+
+ if (inlen > 5) {
+ dev_err(dev, "command len %d too big!\n", resp_len);
+ return -EOVERFLOW;
+ }
+
+ /* Suspending in the middle of an EC command hoses things badly! */
+ WARN_ON(priv->suspended);
+ if (priv->suspended)
+ return -EBUSY;
+
+ /* Ensure a valid command and return bytes */
+ nr_bytes = olpc_xo175_ec_is_valid_cmd(cmd);
+ if (nr_bytes < 0) {
+ dev_err_ratelimited(dev, "unknown command 0x%x\n", cmd);
+
+ /*
+ * Assume the best in our callers, and allow unknown commands
+ * through. I'm not the charitable type, but it was beaten
+ * into me. Just maintain a minimum standard of sanity.
+ */
+ if (resp_len > sizeof(priv->resp)) {
+ dev_err(dev, "response too big: %d!\n", resp_len);
+ return -EOVERFLOW;
+ }
+ nr_bytes = resp_len;
+ }
+ if (resp_len > nr_bytes)
+ resp_len = nr_bytes;
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ /* Initialize the state machine */
+ init_completion(&priv->cmd_done);
+ priv->cmd_running = true;
+ priv->cmd_state = CMD_STATE_WAITING_FOR_SWITCH;
+ memset(priv->cmd, 0, sizeof(priv->cmd));
+ priv->cmd[0] = cmd;
+ priv->cmd[1] = inlen;
+ priv->cmd[2] = 0;
+ memcpy(&priv->cmd[3], inbuf, inlen);
+ priv->expected_resp_len = nr_bytes;
+ priv->resp_len = 0;
+ memset(resp, 0, resp_len);
+
+ /* Tickle the cmd gpio to get things started */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 1);
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ /* The irq handler should do the rest */
+ if (!wait_for_completion_timeout(&priv->cmd_done,
+ msecs_to_jiffies(4000))) {
+ dev_err(dev, "EC cmd error: timeout in STATE %d\n",
+ priv->cmd_state);
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ spi_slave_abort(priv->spi);
+ olpc_xo175_ec_read_packet(priv);
+ return -ETIMEDOUT;
+ }
+
+ spin_lock_irqsave(&priv->cmd_state_lock, flags);
+
+ /* Deal with the results. */
+ if (priv->cmd_state == CMD_STATE_ERROR_RECEIVED) {
+ /* EC-provided error is in the single response byte */
+ dev_err(dev, "command 0x%x returned error 0x%x\n",
+ cmd, priv->resp[0]);
+ ret = -EREMOTEIO;
+ } else if (priv->resp_len != nr_bytes) {
+ dev_err(dev, "command 0x%x returned %d bytes, expected %d
bytes\n",
+ cmd, priv->resp_len, nr_bytes);
+ ret = -ETIMEDOUT;
+ } else {
+ /*
+ * We may have 8 bytes in priv->resp, but we only care about
+ * what we've been asked for. If the caller asked for only 2
+ * bytes, give them that. We've guaranteed that
+ * resp_len <= priv->resp_len and priv->resp_len == nr_bytes.
+ */
+ memcpy(resp, priv->resp, resp_len);
+ }
+
+ /* This should already be low, but just in case. */
+ gpiod_set_value_cansleep(priv->gpio_cmd, 0);
+ priv->cmd_running = false;
+
+ spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
+
+ return ret;
+}
+
+static int olpc_xo175_ec_set_event_mask(unsigned int mask)
+{
+ unsigned char args[2];
+
+ args[0] = mask & 0xff;
+ args[1] = (mask >> 8) & 0xff;
+ return olpc_ec_cmd(CMD_WRITE_EXT_SCI_MASK, args, 2, NULL, 0);
+}
+
+static void olpc_xo175_ec_restart(enum reboot_mode mode, const char *cmd)
+{
+ while (1) {
+ olpc_ec_cmd(CMD_POWER_CYCLE, NULL, 0, NULL, 0);
+ mdelay(1000);
+ }
+}
+
+static void olpc_xo175_ec_power_off(void)
+{
+ while (1) {
+ olpc_ec_cmd(CMD_POWER_OFF, NULL, 0, NULL, 0);
+ mdelay(1000);
+ }
+}
+
+#ifdef CONFIG_PM
+static int olpc_xo175_ec_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct olpc_xo175_ec *priv = platform_get_drvdata(pdev);
+ unsigned char hintargs[5];
+ static unsigned int suspend_count;
+
+ suspend_count++;
+ dev_dbg(dev, "%s: suspend sync %08x\n", __func__, suspend_count);
+
+ /*
+ * First byte is 1 to indicate suspend, the rest is an integer
+ * counter.
+ */
+ hintargs[0] = 1;
+ memcpy(&hintargs[1], &suspend_count, 4);
+ olpc_ec_cmd(CMD_SUSPEND_HINT, hintargs, 5, NULL, 0);
+
+ /*
+ * After we've sent the suspend hint, don't allow further EC commands
+ * to be run until we've resumed. Userspace tasks should be frozen,
+ * but kernel threads and interrupts could still schedule EC commands.
+ */
+ priv->suspended = true;
+
+ return 0;
+}
+
+static int olpc_xo175_ec_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct olpc_xo175_ec *priv = platform_get_drvdata(pdev);
+
+ priv->suspended = false;
+
+ return 0;
+}
+
+static int olpc_xo175_ec_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct olpc_xo175_ec *priv = platform_get_drvdata(pdev);
+ unsigned char x = 0;
+
+ priv->suspended = false;
+
+ /*
+ * The resume hint is only needed if no other commands are
+ * being sent during resume. all it does is tell the EC
+ * the SoC is definitely awake.
+ */
+ olpc_ec_cmd(CMD_SUSPEND_HINT, &x, 1, NULL, 0);
+
+ /* Enable all EC events while we're awake */
+ olpc_xo175_ec_set_event_mask(0xffff);
+
+ return 0;
+}
+#endif
+
+static struct platform_device *olpc_ec;
+
+static struct olpc_ec_driver olpc_xo175_ec_driver = {
+ .ec_cmd = olpc_xo175_ec_cmd,
+};
+
+static int olpc_xo175_ec_remove(struct spi_device *spi)
+{
+ if (pm_power_off == olpc_xo175_ec_power_off)
+ pm_power_off = NULL;
+ if (arm_pm_restart == olpc_xo175_ec_restart)
+ arm_pm_restart = NULL;
+
+ spi_slave_abort(spi);
+
+ platform_device_unregister(olpc_ec);
+ olpc_ec = NULL;
+
+ return 0;
+}
+
+static int olpc_xo175_ec_probe(struct spi_device *spi)
+{
+ struct olpc_xo175_ec *priv;
+ int ret;
+
+ if (olpc_ec) {
+ dev_err(&spi->dev, "OLPC EC already registered.\n");
+ return -EBUSY;
+ }
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->gpio_cmd = devm_gpiod_get(&spi->dev, "cmd", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->gpio_cmd)) {
+ dev_err(&spi->dev, "failed to get cmd gpio: %ld\n",
+ PTR_ERR(priv->gpio_cmd));
+ return PTR_ERR(priv->gpio_cmd);
+ }
+
+ priv->spi = spi;
+
+ spin_lock_init(&priv->cmd_state_lock);
+ priv->cmd_state = CMD_STATE_IDLE;
+ init_completion(&priv->cmd_done);
+
+ priv->logbuf_len = 0;
+
+ /* Set up power button input device */
+ priv->pwrbtn = devm_input_allocate_device(&spi->dev);
+ if (!priv->pwrbtn)
+ return -ENOMEM;
+ priv->pwrbtn->name = "Power Button";
+ priv->pwrbtn->dev.parent = &spi->dev;
+ input_set_capability(priv->pwrbtn, EV_KEY, KEY_POWER);
+ ret = input_register_device(priv->pwrbtn);
+ if (ret) {
+ dev_err(&spi->dev, "error registering input device: %d\n", ret);
+ return ret;
+ }
+
+ spi_set_drvdata(spi, priv);
+
+ priv->xfer.rx_buf = priv->rx_buf;
+ priv->xfer.tx_buf = priv->tx_buf;
+
+ olpc_xo175_ec_read_packet(priv);
+
+ olpc_ec_driver_register(&olpc_xo175_ec_driver, priv);
+ olpc_ec = platform_device_register_resndata(&spi->dev, "olpc-ec", -1,
+ NULL, 0, NULL, 0);
+
+ /* Enable all EC events while we're awake */
+ olpc_xo175_ec_set_event_mask(0xffff);
+
+ if (pm_power_off == NULL)
+ pm_power_off = olpc_xo175_ec_power_off;
+ if (arm_pm_restart == NULL)
+ arm_pm_restart = olpc_xo175_ec_restart;
+
+ dev_info(&spi->dev, "OLPC XO-1.75 Embedded Controller driver\n");
+
+ return 0;
+}
+
+static const struct dev_pm_ops olpc_xo175_ec_pm_ops = {
+#ifdef CONFIG_PM
+ .suspend = olpc_xo175_ec_suspend,
+ .resume_noirq = olpc_xo175_ec_resume_noirq,
+ .resume = olpc_xo175_ec_resume,
+#endif
+};
+
+static const struct of_device_id olpc_xo175_ec_of_match[] = {
+ { .compatible = "olpc,xo1.75-ec" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match);
+
+static struct spi_driver olpc_xo175_ec_spi_driver = {
+ .driver = {
+ .name = "olpc-xo175-ec",
+ .of_match_table = olpc_xo175_ec_of_match,
+ .pm = &olpc_xo175_ec_pm_ops,
+ },
+ .probe = olpc_xo175_ec_probe,
+ .remove = olpc_xo175_ec_remove,
+};
+module_spi_driver(olpc_xo175_ec_spi_driver);
+
+MODULE_DESCRIPTION("OLPC XO-1.75 Embedded Controller driver");
+MODULE_AUTHOR("Lennert Buytenhek <buyt...@wantstofly.org>"); /* Functionality
*/
+MODULE_AUTHOR("Lubomir Rintel <lkund...@v3.sk>"); /* Bugs */
+MODULE_LICENSE("GPL");
--
2.19.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
