On Sun, Oct 21, 2018 at 10:31:38AM +0200, Slawomir Stepien wrote:
> On paź 21, 2018 11:49, Nishad Kamdar wrote:
> > Use the gpiod interface instead of the deprecated old non-descriptor
> > interface.
>
> Hi!
>
> See my comments below.
>
> > Signed-off-by: Nishad Kamdar <nishadkam...@gmail.com>
> > ---
> > drivers/staging/iio/resolver/ad2s1210.c | 110 +++++++++++++++---------
> > drivers/staging/iio/resolver/ad2s1210.h | 3 -
> > 2 files changed, 71 insertions(+), 42 deletions(-)
> >
> > diff --git a/drivers/staging/iio/resolver/ad2s1210.c
> > b/drivers/staging/iio/resolver/ad2s1210.c
> > index ac13b99bd9cb..ed372a5f9130 100644
> > --- a/drivers/staging/iio/resolver/ad2s1210.c
> > +++ b/drivers/staging/iio/resolver/ad2s1210.c
> > @@ -15,7 +15,7 @@
> > #include <linux/slab.h>
> > #include <linux/sysfs.h>
> > #include <linux/delay.h>
> > -#include <linux/gpio.h>
> > +#include <linux/gpio/consumer.h>
> > #include <linux/module.h>
> >
> > #include <linux/iio/iio.h>
> > @@ -73,6 +73,11 @@ struct ad2s1210_state {
> > const struct ad2s1210_platform_data *pdata;
> > struct mutex lock;
> > struct spi_device *sdev;
> > + struct gpio_desc *sample;
> > + struct gpio_desc *a0;
> > + struct gpio_desc *a1;
> > + struct gpio_desc *res0;
> > + struct gpio_desc *res1;
> > unsigned int fclkin;
> > unsigned int fexcit;
> > bool hysteresis;
> > @@ -91,8 +96,8 @@ static const int ad2s1210_mode_vals[4][2] = {
> > static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
> > struct ad2s1210_state *st)
> > {
> > - gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
> > - gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
> > + gpiod_set_value(st->a0, ad2s1210_mode_vals[mode][0]);
> > + gpiod_set_value(st->a1, ad2s1210_mode_vals[mode][1]);
> > st->mode = mode;
> > }
> >
> > @@ -152,8 +157,8 @@ int ad2s1210_update_frequency_control_word(struct
> > ad2s1210_state *st)
> >
> > static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state
> > *st)
> > {
> > - int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
> > - gpio_get_value(st->pdata->res[1]);
> > + int resolution = (gpiod_get_value(st->res0) << 1) |
> > + gpiod_get_value(st->res1);
> >
> > return ad2s1210_resolution_value[resolution];
> > }
> > @@ -164,10 +169,10 @@ static const int ad2s1210_res_pins[4][2] = {
> >
> > static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
> > {
> > - gpio_set_value(st->pdata->res[0],
> > - ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
> > - gpio_set_value(st->pdata->res[1],
> > - ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
> > + gpiod_set_value(st->res0,
> > + ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
> > + gpiod_set_value(st->res1,
> > + ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
> > }
> >
> > static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
> > @@ -401,15 +406,15 @@ static ssize_t ad2s1210_clear_fault(struct device
> > *dev,
> > int ret;
> >
> > mutex_lock(&st->lock);
> > - gpio_set_value(st->pdata->sample, 0);
> > + gpiod_set_value(st->sample, 0);
> > /* delay (2 * tck + 20) nano seconds */
> > udelay(1);
> > - gpio_set_value(st->pdata->sample, 1);
> > + gpiod_set_value(st->sample, 1);
> > ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
> > if (ret < 0)
> > goto error_ret;
> > - gpio_set_value(st->pdata->sample, 0);
> > - gpio_set_value(st->pdata->sample, 1);
> > + gpiod_set_value(st->sample, 0);
> > + gpiod_set_value(st->sample, 1);
> > error_ret:
> > mutex_unlock(&st->lock);
> >
> > @@ -466,7 +471,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> > s16 vel;
> >
> > mutex_lock(&st->lock);
> > - gpio_set_value(st->pdata->sample, 0);
> > + gpiod_set_value(st->sample, 0);
> > /* delay (6 * tck + 20) nano seconds */
> > udelay(1);
> >
> > @@ -512,7 +517,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> > }
> >
> > error_ret:
> > - gpio_set_value(st->pdata->sample, 1);
> > + gpiod_set_value(st->sample, 1);
> > /* delay (2 * tck + 20) nano seconds */
> > udelay(1);
> > mutex_unlock(&st->lock);
> > @@ -628,32 +633,59 @@ static const struct iio_info ad2s1210_info = {
> > .attrs = &ad2s1210_attribute_group,
> > };
> >
> > -static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
> > +static int ad2s1210_setup_gpios(struct spi_device *spi,
> > + struct ad2s1210_state *st)
>
> This change is not needed. The st has the spi_device inside. Use
> container_of()
> macro here.
>
> > {
> > - unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> > - struct gpio ad2s1210_gpios[] = {
> > - { st->pdata->sample, GPIOF_DIR_IN, "sample" },
> > - { st->pdata->a[0], flags, "a0" },
> > - { st->pdata->a[1], flags, "a1" },
> > - { st->pdata->res[0], flags, "res0" },
> > - { st->pdata->res[0], flags, "res1" },
> > - };
> > + int ret = 0;
> > + unsigned long flags = st->pdata->gpioin ? GPIOD_IN : GPIOD_OUT_LOW;
> > +
> > + st->sample = devm_gpiod_get(&spi->dev, "sample", GPIOD_IN);
> > + if (IS_ERR(st->sample)) {
> > + ret = PTR_ERR(st->sample);
> > + dev_err(&spi->dev, "Failed to request sample GPIO: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + st->a0 = devm_gpiod_get(&spi->dev, "a0", flags);
> > + if (IS_ERR(st->a0)) {
> > + ret = PTR_ERR(st->a0);
> > + dev_err(&spi->dev, "Failed to request a0 GPIO: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + st->a1 = devm_gpiod_get(&spi->dev, "a1", flags);
> > + if (IS_ERR(st->a1)) {
> > + ret = PTR_ERR(st->a1);
> > + dev_err(&spi->dev, "Failed to request a1 GPIO: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + st->res0 = devm_gpiod_get(&spi->dev, "res0", flags);
> > + if (IS_ERR(st->res0)) {
> > + ret = PTR_ERR(st->res0);
> > + dev_err(&spi->dev, "Failed to request res0 GPIO: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + st->res1 = devm_gpiod_get(&spi->dev, "res1", flags);
> > + if (IS_ERR(st->res1)) {
> > + ret = PTR_ERR(st->res1);
> > + dev_err(&spi->dev, "Failed to request res1 GPIO: %d\n",
> > + ret);
> > + return ret;
> > + }
>
> To reduce the redundant code here, create an array of structs. The struct will
> have a pointer to gpio_desc, name of the gpio and the gpios' flags. Then you
> can
> use for loop to get all the needed gpios:
>
> for (l = 0; l < ARRAY_SIZE(str); l++) {
> str[l].ptr = devm_gpiod_get(&spi->dev, str[l].name, str[l].flags);
> if (IS_ERR(str[l].res1)) {
> ...
> }
> }
>
> > - return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
> > + return ret;
> > }
> >
> > -static void ad2s1210_free_gpios(struct ad2s1210_state *st)
> > +static void ad2s1210_free_gpios(struct spi_device *spi,
> > + struct ad2s1210_state *st)
> > {
> > - unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> > - struct gpio ad2s1210_gpios[] = {
> > - { st->pdata->sample, GPIOF_DIR_IN, "sample" },
> > - { st->pdata->a[0], flags, "a0" },
> > - { st->pdata->a[1], flags, "a1" },
> > - { st->pdata->res[0], flags, "res0" },
> > - { st->pdata->res[0], flags, "res1" },
> > - };
> > -
> > - gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
> > + devm_gpiod_put(&spi->dev, st->sample);
> > + devm_gpiod_put(&spi->dev, st->a0);
> > + devm_gpiod_put(&spi->dev, st->a1);
> > + devm_gpiod_put(&spi->dev, st->res0);
> > + devm_gpiod_put(&spi->dev, st->res1);
> > }
>
> This whole function ad2s1210_free_gpios is not needed anymore because you are
> using the devm API (it's called from probe and remove, so you are safe).
>
> > static int ad2s1210_probe(struct spi_device *spi)
> > @@ -670,7 +702,7 @@ static int ad2s1210_probe(struct spi_device *spi)
> > return -ENOMEM;
> > st = iio_priv(indio_dev);
> > st->pdata = spi->dev.platform_data;
> > - ret = ad2s1210_setup_gpios(st);
> > + ret = ad2s1210_setup_gpios(spi, st);
> > if (ret < 0)
> > return ret;
> >
> > @@ -702,7 +734,7 @@ static int ad2s1210_probe(struct spi_device *spi)
> > return 0;
> >
> > error_free_gpios:
> > - ad2s1210_free_gpios(st);
> > + ad2s1210_free_gpios(spi, st);
> > return ret;
> > }
> >
> > @@ -711,7 +743,7 @@ static int ad2s1210_remove(struct spi_device *spi)
> > struct iio_dev *indio_dev = spi_get_drvdata(spi);
> >
> > iio_device_unregister(indio_dev);
> > - ad2s1210_free_gpios(iio_priv(indio_dev));
> > + ad2s1210_free_gpios(spi, iio_priv(indio_dev));
> >
> > return 0;
> > }
> > diff --git a/drivers/staging/iio/resolver/ad2s1210.h
> > b/drivers/staging/iio/resolver/ad2s1210.h
> > index e9b2147701fc..63d479b20a6c 100644
> > --- a/drivers/staging/iio/resolver/ad2s1210.h
> > +++ b/drivers/staging/iio/resolver/ad2s1210.h
> > @@ -12,9 +12,6 @@
> > #define _AD2S1210_H
> >
> > struct ad2s1210_platform_data {
> > - unsigned int sample;
> > - unsigned int a[2];
> > - unsigned int res[2];
> > bool gpioin;
> > };
> > #endif /* _AD2S1210_H */
>
> --
> Slawomir Stepien
Ok, I'll make the changes.
Thanks for the review.
regards,
Nishad
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
