On Sat, 8 Dec 2018 20:46:37 +0530
Shreeya Patel <shreeya.patel23...@gmail.com> wrote:
> There is a function adt7316_irq_setup() where irq_type is being
> set. It would be good to move devm_request_threaded_irq() function
> and assignment of chip->config1 in adt7316_irq_setup() to unclutter
> the code in probe function.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23...@gmail.com>
As commented below, this didn't end up as tidy as it might have been.
It would I think have been simpler before patch 1 or just merged with it.
Anyhow, I might combine the two whilst applying. However before I do
that I'd like to leave this on list for a few days to let Alex
or others have time for another look before I apply it.
All heading in the right direction!
Thanks,
Jonathan
> ---
> drivers/staging/iio/addac/adt7316.c | 34 ++++++++++++++---------------
> 1 file changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/staging/iio/addac/adt7316.c
> b/drivers/staging/iio/addac/adt7316.c
> index 86b2c3d53588..97dd48153293 100644
> --- a/drivers/staging/iio/addac/adt7316.c
> +++ b/drivers/staging/iio/addac/adt7316.c
> @@ -1807,11 +1807,12 @@ static irqreturn_t adt7316_event_handler(int irq,
> void *private)
> return IRQ_HANDLED;
> }
>
> -static int adt7316_setup_irq(struct device *dev, int irq)
> +static int adt7316_setup_irq(struct iio_dev *indio_dev)
Hmm. This has ended up a lot more complex than ideal due
to the effective two layers of rework.
I would either have done patches 1 and 2 as one patch or
reordered them so the rework preceded the change
to DT. It's not that important but it would have lead
to code that was easier to review.
> {
> - int irq_type;
> + struct adt7316_chip_info *chip = iio_priv(indio_dev);
> + int irq_type, ret;
>
> - irq_type = irqd_get_trigger_type(irq_get_irq_data(irq));
> + irq_type = irqd_get_trigger_type(irq_get_irq_data(chip->bus.irq));
>
> switch (irq_type) {
> case IRQF_TRIGGER_HIGH:
> @@ -1821,13 +1822,23 @@ static int adt7316_setup_irq(struct device *dev, int
> irq)
> case IRQF_TRIGGER_FALLING:
> break;
> default:
> - dev_info(dev, "mode %d unsupported, using IRQF_TRIGGER_LOW\n",
> + dev_info(&indio_dev->dev, "mode %d unsupported, using
> IRQF_TRIGGER_LOW\n",
> irq_type);
> irq_type = IRQF_TRIGGER_LOW;
> break;
> }
>
> - return irq_type;
> + ret = devm_request_threaded_irq(&indio_dev->dev, chip->bus.irq,
> + NULL, adt7316_event_handler,
> + irq_type | IRQF_ONESHOT,
> + indio_dev->name, indio_dev);
> + if (ret)
> + return ret;
> +
> + if (irq_type & IRQF_TRIGGER_HIGH)
> + chip->config1 |= ADT7316_INT_POLARITY;
> +
> + return ret;
> }
>
> /*
> @@ -2124,7 +2135,6 @@ int adt7316_probe(struct device *dev, struct
> adt7316_bus *bus,
> {
> struct adt7316_chip_info *chip;
> struct iio_dev *indio_dev;
> - int irq_type;
> int ret = 0;
>
> indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
> @@ -2168,19 +2178,9 @@ int adt7316_probe(struct device *dev, struct
> adt7316_bus *bus,
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> if (chip->bus.irq > 0) {
> - irq_type = adt7316_setup_irq(dev, chip->bus.irq);
> -
> - ret = devm_request_threaded_irq(dev, chip->bus.irq,
> - NULL,
> - adt7316_event_handler,
> - irq_type | IRQF_ONESHOT,
> - indio_dev->name,
> - indio_dev);
> + ret = adt7316_setup_irq(indio_dev);
> if (ret)
> return ret;
> -
> - if (irq_type & IRQF_TRIGGER_HIGH)
> - chip->config1 |= ADT7316_INT_POLARITY;
> }
>
> ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, chip->config1);
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
