The custom phase and scale attributes were moved to standard iio types.
Signed-off-by: Beniamin Bia <beniamin....@analog.com>
---
Changes in v2:
-the personal email address was replaced by the work email
-separate define for every phase channel
-enum used for write_phase functions
-phase variables were replaced by an array
drivers/staging/iio/frequency/ad9834.c | 53 ++++++++++++++++----------
1 file changed, 32 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/iio/frequency/ad9834.c
b/drivers/staging/iio/frequency/ad9834.c
index 561617046c20..4366b6121154 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -82,6 +82,7 @@ struct ad9834_state {
struct mutex lock; /* protect sensor state */
unsigned long frequency[2];
+ unsigned long phase[2];
/*
* DMA (thus cache coherency maintenance) requires the
@@ -113,6 +114,8 @@ enum ad9834_supported_device_ids {
.output = 1, \
.channel = (chan), \
.info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY) \
+ | BIT(IIO_CHAN_INFO_PHASE),\
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec ad9833_channels[] = {
@@ -172,13 +175,26 @@ static int ad9834_write_frequency(struct ad9834_state *st,
}
static int ad9834_write_phase(struct ad9834_state *st,
- unsigned long addr, unsigned long phase)
+ enum ad9834_ch_addr addr,
+ unsigned long phase)
{
+ int ret;
+
if (phase > BIT(AD9834_PHASE_BITS))
return -EINVAL;
- st->data = cpu_to_be16(addr | phase);
- return spi_sync(st->spi, &st->msg);
+ if (addr == AD9834_CHANNEL_ADDRESS0)
+ st->data = cpu_to_be16(AD9834_REG_PHASE0 | phase);
+ else
+ st->data = cpu_to_be16(AD9834_REG_PHASE1 | phase);
+
+ ret = spi_sync(st->spi, &st->msg);
+ if (ret)
+ return ret;
+
+ st->phase[(int)addr] = phase;
+
+ return 0;
}
static int ad9834_read_raw(struct iio_dev *indio_dev,
@@ -191,6 +207,13 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_FREQUENCY:
*val = st->frequency[chan->channel];
return IIO_VAL_INT;
+ case IIO_CHAN_INFO_PHASE:
+ *val = st->phase[chan->channel];
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ /*1 hz */
+ *val = 1;
+ return IIO_VAL_INT;
}
return -EINVAL;
@@ -207,6 +230,10 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
return ad9834_write_frequency(st,
(enum
ad9834_ch_addr)chan->channel,
val);
+ case IIO_CHAN_INFO_PHASE:
+ return ad9834_write_phase(st,
+ (enum ad9834_ch_addr)chan->channel,
+ val);
default:
return -EINVAL;
}
@@ -231,10 +258,6 @@ static ssize_t ad9834_write(struct device *dev,
mutex_lock(&st->lock);
switch ((u32)this_attr->address) {
- case AD9834_REG_PHASE0:
- case AD9834_REG_PHASE1:
- ret = ad9834_write_phase(st, this_attr->address, val);
- break;
case AD9834_OPBITEN:
if (st->control & AD9834_MODE) {
ret = -EINVAL; /* AD9843 reserved mode */
@@ -394,12 +417,8 @@ static
IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
*/
static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
-static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
-static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
-static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
-static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
ad9834_write, AD9834_PIN_SW);
@@ -410,10 +429,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0,
ad9834_store_wavetype, 0);
static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
static struct attribute *ad9834_attributes[] = {
- &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
- &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
- &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
- &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
@@ -427,10 +442,6 @@ static struct attribute *ad9834_attributes[] = {
};
static struct attribute *ad9833_attributes[] = {
- &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
- &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
- &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
- &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
@@ -554,11 +565,11 @@ static int ad9834_probe(struct spi_device *spi)
if (ret)
goto error_clock_unprepare;
- ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
+ ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS0, 512);
if (ret)
goto error_clock_unprepare;
- ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
+ ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS1, 1024);
if (ret)
goto error_clock_unprepare;
--
2.17.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
