On Fri, 14 Jun 2019, Ming Lei wrote:

> 
> Follows the fixed version, could you review again?
> 
> From f03484d4bac083c39d70665cfbadb641093b63de Mon Sep 17 00:00:00 2001
> From: Ming Lei <ming....@redhat.com>
> Date: Wed, 12 Jun 2019 20:37:35 +0800
> Subject: [PATCH] scsi: aha152x: use sg helper to operate scatterlist
> 
> Use the scatterlist iterators and remove direct indexing of the
> scatterlist array.
> 
> This way allows us to pre-allocate one small scatterlist, which can be
> chained with one runtime allocated scatterlist if the pre-allocated one
> isn't enough for the whole request.
> 
> Signed-off-by: Ming Lei <ming....@redhat.com>
> ---
>  drivers/scsi/aha152x.c | 34 ++++++++++++++++++++--------------
>  1 file changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
> index 97872838b983..7faecdefda56 100644
> --- a/drivers/scsi/aha152x.c
> +++ b/drivers/scsi/aha152x.c
> @@ -2033,7 +2033,7 @@ static void datai_run(struct Scsi_Host *shpnt)
>                                   CURRENT_SC->SCp.buffers_residual > 0) {
>                                       /* advance to next buffer */
>                                       CURRENT_SC->SCp.buffers_residual--;
> -                                     CURRENT_SC->SCp.buffer++;
> +                                     CURRENT_SC->SCp.buffer = 
> sg_next(CURRENT_SC->SCp.buffer);
>                                       CURRENT_SC->SCp.ptr           = 
> SG_ADDRESS(CURRENT_SC->SCp.buffer);
>                                       CURRENT_SC->SCp.this_residual = 
> CURRENT_SC->SCp.buffer->length;
>                               }
> @@ -2139,7 +2139,7 @@ static void datao_run(struct Scsi_Host *shpnt)
>               if(CURRENT_SC->SCp.this_residual==0 && 
> CURRENT_SC->SCp.buffers_residual>0) {
>                       /* advance to next buffer */
>                       CURRENT_SC->SCp.buffers_residual--;
> -                     CURRENT_SC->SCp.buffer++;
> +                     CURRENT_SC->SCp.buffer = 
> sg_next(CURRENT_SC->SCp.buffer);
>                       CURRENT_SC->SCp.ptr           = 
> SG_ADDRESS(CURRENT_SC->SCp.buffer);
>                       CURRENT_SC->SCp.this_residual = 
> CURRENT_SC->SCp.buffer->length;
>               }
> @@ -2158,22 +2158,28 @@ static void datao_run(struct Scsi_Host *shpnt)
>  static void datao_end(struct Scsi_Host *shpnt)
>  {
>       if(TESTLO(DMASTAT, DFIFOEMP)) {
> -             int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
> -                     GETSTCNT();
> +             int done = GETSTCNT();
> +             int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) - done;

I think that's better than my suggestion.

> +             struct scatterlist *sg = scsi_sglist(CURRENT_SC);
> +             int i;
>  
>               CMD_INC_RESID(CURRENT_SC, data_count);
>  
> -             data_count -= CURRENT_SC->SCp.ptr -
> -                     SG_ADDRESS(CURRENT_SC->SCp.buffer);
> -             while(data_count>0) {
> -                     CURRENT_SC->SCp.buffer--;
> -                     CURRENT_SC->SCp.buffers_residual++;
> -                     data_count -= CURRENT_SC->SCp.buffer->length;
> +             /*
> +              * rewind where we have done, and we have to start from
> +              * the beginning
> +              */

How about, "Locate the first SG entry not yet sent".

We could use sg_nents_for_len() but it returns a count of sg entries not a 
scatterlist pointer so it's not very helpful here.

> +             for (i = 0; done > 0 && !sg_is_last(sg); i++, sg = sg_next(sg)) 
> {
> +                     if (done < sg->length)
> +                             break;
> +                     done -= sg->length;
>               }
> -             CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
> -                     data_count;
> -             CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
> -                     data_count;
> +
> +             CURRENT_SC->SCp.buffers_residual = i;

Contradicting my previous email, that's still not right. I think it would 
have to be,

                CURRENT_SC->SCp.buffers_residual = scsi_sg_count(CURRENT_SC) - 
i;

But we could remove all references to SCp.buffers_residual, like I did in 
patch 15/15 for NCR5380.c.

> +             CURRENT_SC->SCp.buffer = sg;
> +             CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) + done;
> +             CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length -
> +                     done;
>       }
>  
>       SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
> 

What do you think of the revised patch below?

diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 97872838b983..6d0518f616cb 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -948,7 +948,6 @@ static int aha152x_internal_queue(struct scsi_cmnd *SCpnt,
           SCp.ptr              : buffer pointer
           SCp.this_residual    : buffer length
           SCp.buffer           : next buffer
-          SCp.buffers_residual : left buffers in list
           SCp.phase            : current state of the command */
 
        if ((phase & resetting) || !scsi_sglist(SCpnt)) {
@@ -956,13 +955,11 @@ static int aha152x_internal_queue(struct scsi_cmnd *SCpnt,
                SCpnt->SCp.this_residual = 0;
                scsi_set_resid(SCpnt, 0);
                SCpnt->SCp.buffer           = NULL;
-               SCpnt->SCp.buffers_residual = 0;
        } else {
                scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
                SCpnt->SCp.buffer           = scsi_sglist(SCpnt);
                SCpnt->SCp.ptr              = SG_ADDRESS(SCpnt->SCp.buffer);
                SCpnt->SCp.this_residual    = SCpnt->SCp.buffer->length;
-               SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
        }
 
        DO_LOCK(flags);
@@ -2030,10 +2027,9 @@ static void datai_run(struct Scsi_Host *shpnt)
                                }
 
                                if (CURRENT_SC->SCp.this_residual == 0 &&
-                                   CURRENT_SC->SCp.buffers_residual > 0) {
+                                   !sg_is_last(CURRENT_SC->SCp.buffer)) {
                                        /* advance to next buffer */
-                                       CURRENT_SC->SCp.buffers_residual--;
-                                       CURRENT_SC->SCp.buffer++;
+                                       CURRENT_SC->SCp.buffer = 
sg_next(CURRENT_SC->SCp.buffer);
                                        CURRENT_SC->SCp.ptr           = 
SG_ADDRESS(CURRENT_SC->SCp.buffer);
                                        CURRENT_SC->SCp.this_residual = 
CURRENT_SC->SCp.buffer->length;
                                }
@@ -2136,10 +2132,10 @@ static void datao_run(struct Scsi_Host *shpnt)
                        CMD_INC_RESID(CURRENT_SC, -2 * data_count);
                }
 
-               if(CURRENT_SC->SCp.this_residual==0 && 
CURRENT_SC->SCp.buffers_residual>0) {
+               if(CURRENT_SC->SCp.this_residual==0 &&
+                  !sg_is_last(CURRENT_SC->SCp.buffer)) {
                        /* advance to next buffer */
-                       CURRENT_SC->SCp.buffers_residual--;
-                       CURRENT_SC->SCp.buffer++;
+                       CURRENT_SC->SCp.buffer = 
sg_next(CURRENT_SC->SCp.buffer);
                        CURRENT_SC->SCp.ptr           = 
SG_ADDRESS(CURRENT_SC->SCp.buffer);
                        CURRENT_SC->SCp.this_residual = 
CURRENT_SC->SCp.buffer->length;
                }
@@ -2158,22 +2154,24 @@ static void datao_run(struct Scsi_Host *shpnt)
 static void datao_end(struct Scsi_Host *shpnt)
 {
        if(TESTLO(DMASTAT, DFIFOEMP)) {
-               int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
-                       GETSTCNT();
+               int done = GETSTCNT();
+               int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) - done;
+               struct scatterlist *sg = scsi_sglist(CURRENT_SC);
 
                CMD_INC_RESID(CURRENT_SC, data_count);
 
-               data_count -= CURRENT_SC->SCp.ptr -
-                       SG_ADDRESS(CURRENT_SC->SCp.buffer);
-               while(data_count>0) {
-                       CURRENT_SC->SCp.buffer--;
-                       CURRENT_SC->SCp.buffers_residual++;
-                       data_count -= CURRENT_SC->SCp.buffer->length;
+               /* Locate the first SG entry not yet sent */
+               while (done > 0 && !sg_is_last(sg)) {
+                       if (done < sg->length)
+                               break;
+                       done -= sg->length;
+                       sg = sg_next(sg);
                }
-               CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
-                       data_count;
-               CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
-                       data_count;
+
+               CURRENT_SC->SCp.buffer = sg;
+               CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) + done;
+               CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length -
+                       done;
        }
 
        SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
@@ -2501,7 +2499,7 @@ static void get_command(struct seq_file *m, struct 
scsi_cmnd * ptr)
 
        seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
                scsi_get_resid(ptr), ptr->SCp.this_residual,
-               ptr->SCp.buffers_residual);
+               sg_nents(ptr->SCp.buffer) - 1);
 
        if (ptr->SCp.phase & not_issued)
                seq_puts(m, "not issued|");

-- 
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to