From: Michael Hennerich <michael.henner...@analog.com>

ADM1177 is a Hot Swap Controller and Digital Power Monitor with
Soft Start Pin.

Datasheet:
Link: 
https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf

Signed-off-by: Michael Hennerich <michael.henner...@analog.com>
Co-developed-by: Beniamin Bia <beniamin....@analog.com>
Signed-off-by: Beniamin Bia <beniamin....@analog.com>
---
 drivers/iio/adc/Kconfig   |  12 ++
 drivers/iio/adc/Makefile  |   1 +
 drivers/iio/adc/adm1177.c | 257 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 270 insertions(+)
 create mode 100644 drivers/iio/adc/adm1177.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9554890a3200..4db8c6dcb595 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -228,6 +228,18 @@ config ASPEED_ADC
          To compile this driver as a module, choose M here: the module will be
          called aspeed_adc.
 
+config ADM1177
+       tristate "Analog Devices ADM1177 Digital Power Monitor driver"
+       depends on I2C
+       help
+         Say yes here to build support for Analog Devices:
+         ADM1177 Hot Swap Controller and Digital Power Monitor
+         with Soft Start Pin. Provides direct access
+         via sysfs.
+
+         To compile this driver as a module, choose M here: the
+         module will be called adm1177.
+
 config AT91_ADC
        tristate "Atmel AT91 ADC"
        depends on ARCH_AT91
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 5ecc481c2967..7899d6a158f3 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD7949) += ad7949.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
+obj-$(CONFIG_ADM1177) += adm1177.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
 obj-$(CONFIG_AXP20X_ADC) += axp20x_adc.o
diff --git a/drivers/iio/adc/adm1177.c b/drivers/iio/adc/adm1177.c
new file mode 100644
index 000000000000..daec34566a65
--- /dev/null
+++ b/drivers/iio/adc/adm1177.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin
+ *
+ * Copyright 2015-2019 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+/*  Command Byte Operations */
+#define ADM1177_CMD_V_CONT     BIT(0)
+#define ADM1177_CMD_V_ONCE     BIT(1)
+#define ADM1177_CMD_I_CONT     BIT(2)
+#define ADM1177_CMD_I_ONCE     BIT(3)
+#define ADM1177_CMD_VRANGE     BIT(4)
+#define ADM1177_CMD_STATUS_RD  BIT(6)
+
+/* Extended Register */
+#define ADM1177_REG_ALERT_EN   1
+#define ADM1177_REG_ALERT_TH   2
+#define ADM1177_REG_CONTROL    3
+
+/* ADM1177_REG_ALERT_EN */
+#define ADM1177_EN_ADC_OC1     BIT(0)
+#define ADM1177_EN_ADC_OC4     BIT(1)
+#define ADM1177_EN_HS_ALERT    BIT(2)
+#define ADM1177_EN_OFF_ALERT   BIT(3)
+#define ADM1177_CLEAR          BIT(4)
+
+/* ADM1177_REG_CONTROL */
+#define ADM1177_SWOFF          BIT(0)
+
+#define ADM1177_BITS           12
+
+/**
+ * struct adm1177_state - driver instance specific data
+ * @client             pointer to i2c client
+ * @reg                        regulator info for the the power supply of the 
device
+ * @command            internal control register
+ * @r_sense_uohm       current sense resistor value
+ * @alert_threshold_ua current limit for shutdown
+ * @vrange_high                internal voltage divider
+ */
+struct adm1177_state {
+       struct i2c_client       *client;
+       struct regulator        *reg;
+       u8                      command;
+       u32                     r_sense_uohm;
+       u32                     alert_threshold_ua;
+       bool                    vrange_high;
+};
+
+static int adm1177_read(struct adm1177_state *st, u8 num, u8 *data)
+{
+       struct i2c_client *client = st->client;
+       int ret = 0;
+
+       ret = i2c_master_recv(client, data, num);
+       if (ret < 0) {
+               dev_err(&client->dev, "I2C read error\n");
+               return ret;
+       }
+
+       return 0;
+}
+
+static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd)
+{
+       st->command = cmd;
+       return i2c_smbus_write_byte(st->client, cmd);
+}
+
+static int adm1177_write_reg(struct adm1177_state *st, u8 reg, u8 val)
+{
+       return i2c_smbus_write_byte_data(st->client, reg, val);
+}
+
+static int adm1177_read_raw(struct iio_dev *indio_dev,
+                          struct iio_chan_spec const *chan,
+                          int *val,
+                          int *val2,
+                          long mask)
+{
+       struct adm1177_state *st = iio_priv(indio_dev);
+       u8 data[3];
+
+       switch (mask) {
+       case IIO_CHAN_INFO_RAW:
+               adm1177_read(st, 3, data);
+               switch (chan->type) {
+               case IIO_VOLTAGE:
+                       *val = (data[0] << 4) | (data[2] >> 4);
+                       return IIO_VAL_INT;
+               case IIO_CURRENT:
+                       *val = (data[1] << 4) | (data[2] & 0xF);
+                       return IIO_VAL_INT;
+               default:
+                       return -EINVAL;
+               }
+
+       case IIO_CHAN_INFO_SCALE:
+               switch (chan->type) {
+               case IIO_VOLTAGE:
+                       if (st->command & ADM1177_CMD_VRANGE)
+                               *val = 6650;
+                       else
+                               *val = 26350;
+
+                       *val2 = ADM1177_BITS;
+                       return IIO_VAL_FRACTIONAL_LOG2;
+               case IIO_CURRENT:
+                       *val = 105840 / st->r_sense_uohm;
+
+                       *val2 = ADM1177_BITS;
+                       return IIO_VAL_FRACTIONAL_LOG2;
+               default:
+                       return -EINVAL;
+               }
+       default:
+               return -EINVAL;
+       }
+}
+
+static const struct iio_chan_spec adm1177_channels[] = {
+       {
+               .type = IIO_VOLTAGE,
+               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+                                     BIT(IIO_CHAN_INFO_SCALE),
+               .indexed = 1,
+               .channel = 0,
+       },
+       {
+               .type = IIO_CURRENT,
+               .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+                                     BIT(IIO_CHAN_INFO_SCALE),
+               .indexed = 1,
+               .channel = 0,
+       },
+};
+
+static const struct iio_info adm1177_info = {
+       .read_raw = &adm1177_read_raw,
+};
+static void adm1177_remove(void *data)
+{
+       struct adm1177_state *st = data;
+
+       if (st->reg)
+               regulator_disable(st->reg);
+}
+
+static int adm1177_probe(struct i2c_client *client,
+                        const struct i2c_device_id *id)
+{
+       int ret;
+       struct device_node *np;
+       struct adm1177_state *st;
+       struct iio_dev *indio_dev;
+
+       indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+       if (!indio_dev)
+               return -ENOMEM;
+
+       st = iio_priv(indio_dev);
+       i2c_set_clientdata(client, indio_dev);
+       st->client = client;
+
+       np = client->dev.of_node;
+
+       st->reg = devm_regulator_get_optional(&client->dev, "vref");
+       if (IS_ERR(st->reg)) {
+               if (PTR_ERR(st->reg) == EPROBE_DEFER)
+                       return -EPROBE_DEFER;
+
+               st->reg = NULL;
+       } else {
+               ret = regulator_enable(st->reg);
+               if (ret)
+                       return ret;
+               ret = devm_add_action_or_reset(&client->dev, adm1177_remove,
+                                              st);
+               if (ret)
+                       return ret;
+       }
+
+       of_property_read_u32(np, "adi,r-sense-micro-ohms", &st->r_sense_uohm);
+       of_property_read_u32(np, "adi,shutdown-threshold-microamp",
+                            &st->alert_threshold_ua);
+       st->vrange_high = of_property_read_bool(np,
+                               "adi,vrange-high-enable");
+       if (st->alert_threshold_ua) {
+               unsigned int val;
+
+               val = (st->alert_threshold_ua * st->r_sense_uohm * 0xFF);
+               val /= 105840000U;
+               if (val > 0xFF) {
+                       dev_err(&client->dev,
+                               "Requested shutdown current %d uA above 
limit\n",
+                               st->alert_threshold_ua);
+
+                       val = 0xFF;
+               }
+               adm1177_write_reg(st, ADM1177_REG_ALERT_TH, val);
+       }
+
+       adm1177_write_cmd(st, ADM1177_CMD_V_CONT |
+                             ADM1177_CMD_I_CONT |
+                             (st->vrange_high ? 0 : ADM1177_CMD_VRANGE));
+
+       indio_dev->name = id->name;
+       indio_dev->channels = adm1177_channels;
+       indio_dev->num_channels = ARRAY_SIZE(adm1177_channels);
+
+       indio_dev->dev.parent = &client->dev;
+       indio_dev->info = &adm1177_info;
+       indio_dev->modes = INDIO_DIRECT_MODE;
+
+       return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id adm1177_ids[] = {
+       { "adm1177", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, adm1177_ids);
+
+static const struct of_device_id adm1177_dt_ids[] = {
+       { .compatible = "adi,adm1177" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
+
+static struct i2c_driver adm1177_driver = {
+       .driver = {
+               .name = "adm1177",
+               .of_match_table = adm1177_dt_ids,
+       },
+       .probe = adm1177_probe,
+       .id_table = adm1177_ids,
+};
+module_i2c_driver(adm1177_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.henner...@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to