On Mon, Mar 02, 2020 at 04:34:40PM +0000, ajay.kat...@microchip.com wrote: > From: Ajay Singh <ajay.kat...@microchip.com> > > Moved '/drivers/staging/wilc1000//microchip,wilc1000,spi.yaml' to > 'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml'.
Not a useful changelog. I think this should be combined with the SDIO version. Details below. > > Signed-off-by: Ajay Singh <ajay.kat...@microchip.com> > --- > .../net/wireless/microchip,wilc1000,spi.yaml | 61 +++++++++++++++++++ > 1 file changed, 61 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml > > diff --git > a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml > b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml > new file mode 100644 > index 000000000000..cc8ed64ce627 > --- /dev/null > +++ > b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml > @@ -0,0 +1,61 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,spi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip WILC wireless SPI devicetree bindings > + > +maintainers: > + - Adham Abozaeid <adham.aboza...@microchip.com> > + - Ajay Singh <ajay.kat...@microchip.com> > + > +description: > + The wilc1000 chips can be connected via SPI. This document describes > + the binding for the SPI connected module. > + > +properties: > + compatible: > + const: microchip,wilc1000-spi You can drop '-spi' (and '-sdio'). They don't need to be different because they already sit on different buses. > + > + spi-max-frequency: > + description: Maximum SPI clocking speed of device in Hz. > + maxItems: 1 > + > + reg: > + description: Chip select address of device. > + maxItems: 1 > + > + irq-gpios: > + description: The GPIO phandle connect to a host IRQ. > + maxItems: 1 > + > + clocks: > + description: phandle to the clock connected on rtc clock line. > + maxItems: 1 > + > +required: > + - compatible > + - spi-max-frequency This should not be required. > + - reg > + - irq-gpios > + > +examples: > + - | > + spi1: spi@fc018000 { > + #address-cells = <1>; > + #size-cells = <0>; > + cs-gpios = <&pioB 21 0>; > + status = "okay"; > + wilc_spi@0 { > + compatible = "microchip,wilc1000-spi"; > + spi-max-frequency = <48000000>; > + reg = <0>; > + irq-gpios = <&pioC 27 0>; > + clocks = <&pck1>; > + clock-names = "rtc_clk"; Not documented. '_clk' is redundant. > + assigned-clocks = <&pck1>; > + assigned-clock-rates = <32768>; Not documented. > + status = "okay"; > + }; > + }; > -- > 2.24.0 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
