From: Ajay Singh <ajay.kat...@microchip.com> Merged the DT binding documentation of SDIO and SPI into a single file. Removed documentation for some of the properties which are not required and handled review comments received in [1] & [2].
[1]. https://lore.kernel.org/linux-wireless/20200303020230.GA15543@bogus [2]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogus Signed-off-by: Ajay Singh <ajay.kat...@microchip.com> --- .../wilc1000/microchip,wilc1000,sdio.yaml | 68 ------------------- ...c1000,spi.yaml => microchip,wilc1000.yaml} | 44 ++++++++---- drivers/staging/wilc1000/sdio.c | 4 +- drivers/staging/wilc1000/spi.c | 2 +- 4 files changed, 34 insertions(+), 84 deletions(-) delete mode 100644 drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml rename drivers/staging/wilc1000/{microchip,wilc1000,spi.yaml => microchip,wilc1000.yaml} (53%) diff --git a/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml b/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml deleted file mode 100644 index 9df7327bc668..000000000000 --- a/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml +++ /dev/null @@ -1,68 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,sdio.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Microchip WILC wireless SDIO devicetree bindings - -maintainers: - - Adham Abozaeid <adham.aboza...@microchip.com> - - Ajay Singh <ajay.kat...@microchip.com> - -description: - The wilc1000 chips can be connected via SDIO. The node is used to - specify child node to the SDIO controller that connects the device - to the system. - -properties: - compatible: - const: microchip,wilc1000-sdio - - interrupts: - maxItems: 1 - - reg: - description: Slot ID used in the controller. - maxItems: 1 - - clocks: - description: phandle to the clock connected on rtc clock line. - maxItems: 1 - - bus-width: - description: The number of data lines wired up the slot. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - - default: 1 - -required: - - compatible - - interrupts - - reg - -examples: - - | - mmc1: mmc@fc000000 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; - non-removable; - vmmc-supply = <&vcc_mmc1_reg>; - vqmmc-supply = <&vcc_3v3_reg>; - status = "okay"; - wilc_sdio@0 { - compatible = "microchip,wilc1000-sdio"; - interrupt-parent = <&pioC>; - interrupts = <27 0>; - reg = <0>; - clocks = <&pck1>; - clock-names = "rtc_clk"; - assigned-clocks = <&pck1>; - assigned-clock-rates = <32768>; - status = "okay"; - bus-width = <4>; - }; - }; diff --git a/drivers/staging/wilc1000/microchip,wilc1000,spi.yaml b/drivers/staging/wilc1000/microchip,wilc1000.yaml similarity index 53% rename from drivers/staging/wilc1000/microchip,wilc1000,spi.yaml rename to drivers/staging/wilc1000/microchip,wilc1000.yaml index dd5e8da1f562..a1914449ad07 100644 --- a/drivers/staging/wilc1000/microchip,wilc1000,spi.yaml +++ b/drivers/staging/wilc1000/microchip,wilc1000.yaml @@ -1,22 +1,22 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,spi.yaml# +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Microchip WILC wireless SPI devicetree bindings +title: Microchip WILC wireless devicetree bindings maintainers: - Adham Abozaeid <adham.aboza...@microchip.com> - Ajay Singh <ajay.kat...@microchip.com> description: - The wilc1000 chips can be connected via SPI. This document describes - the binding for the SPI connected module. + The wilc1000 chips can be connected via SPI or SDIO. This document + describes the binding to connect wilc devices. properties: compatible: - const: microchip,wilc1000-spi + const: microchip,wilc1000 spi-max-frequency: description: Maximum SPI clocking speed of device in Hz. @@ -33,9 +33,11 @@ properties: description: phandle to the clock connected on rtc clock line. maxItems: 1 + clock-names: + const: rtc + required: - compatible - - spi-max-frequency - reg - interrupts @@ -45,17 +47,33 @@ examples: #address-cells = <1>; #size-cells = <0>; cs-gpios = <&pioB 21 0>; - status = "okay"; - wilc_spi@0 { - compatible = "microchip,wilc1000-spi"; + wifi@0 { + compatible = "microchip,wilc1000"; spi-max-frequency = <48000000>; reg = <0>; interrupt-parent = <&pioC>; interrupts = <27 0>; clocks = <&pck1>; - clock-names = "rtc_clk"; - assigned-clocks = <&pck1>; - assigned-clock-rates = <32768>; - status = "okay"; + clock-names = "rtc"; + }; + }; + + - | + mmc1: mmc@fc000000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + bus-width = <4>; + wifi@0 { + compatible = "microchip,wilc1000"; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; }; }; diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c index 44b426874c1b..36eb589263bf 100644 --- a/drivers/staging/wilc1000/sdio.c +++ b/drivers/staging/wilc1000/sdio.c @@ -150,7 +150,7 @@ static int wilc_sdio_probe(struct sdio_func *func, wilc->bus_data = sdio_priv; wilc->dev = &func->dev; - wilc->rtc_clk = devm_clk_get(&func->card->dev, "rtc_clk"); + wilc->rtc_clk = devm_clk_get(&func->card->dev, "rtc"); if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER) return -EPROBE_DEFER; else if (!IS_ERR(wilc->rtc_clk)) @@ -997,7 +997,7 @@ static int wilc_sdio_resume(struct device *dev) } static const struct of_device_id wilc_of_match[] = { - { .compatible = "microchip,wilc1000-sdio", }, + { .compatible = "microchip,wilc1000", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, wilc_of_match); diff --git a/drivers/staging/wilc1000/spi.c b/drivers/staging/wilc1000/spi.c index 852f318a86f0..d77582c55326 100644 --- a/drivers/staging/wilc1000/spi.c +++ b/drivers/staging/wilc1000/spi.c @@ -189,7 +189,7 @@ static int wilc_bus_remove(struct spi_device *spi) } static const struct of_device_id wilc_of_match[] = { - { .compatible = "microchip,wilc1000-spi", }, + { .compatible = "microchip,wilc1000", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, wilc_of_match); -- 2.24.0 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
