From: Ajay Singh <ajay.kat...@microchip.com> Make use of 'interrupts' property instead of using gpio for handling the interrupt as suggested in [1].
[1]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogus Signed-off-by: Ajay Singh <ajay.kat...@microchip.com> --- drivers/staging/wilc1000/netdev.c | 24 ++++++++---------------- drivers/staging/wilc1000/netdev.h | 1 - drivers/staging/wilc1000/sdio.c | 31 ++++++++++++------------------- drivers/staging/wilc1000/spi.c | 15 +-------------- drivers/staging/wilc1000/wlan.h | 1 - 5 files changed, 21 insertions(+), 51 deletions(-) diff --git a/drivers/staging/wilc1000/netdev.c b/drivers/staging/wilc1000/netdev.c index 045f5cdfdca0..a61c1a7aefa8 100644 --- a/drivers/staging/wilc1000/netdev.c +++ b/drivers/staging/wilc1000/netdev.c @@ -46,29 +46,21 @@ static irqreturn_t isr_bh_routine(int irq, void *userdata) static int init_irq(struct net_device *dev) { - int ret = 0; struct wilc_vif *vif = netdev_priv(dev); struct wilc *wl = vif->wilc; - - ret = gpiod_direction_input(wl->gpio_irq); - if (ret) { - netdev_err(dev, "could not obtain gpio for WILC_INTR\n"); - return ret; - } - - wl->dev_irq_num = gpiod_to_irq(wl->gpio_irq); + int ret; ret = request_threaded_irq(wl->dev_irq_num, isr_uh_routine, isr_bh_routine, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "WILC_IRQ", dev); - if (ret < 0) - netdev_err(dev, "Failed to request IRQ\n"); - else - netdev_dbg(dev, "IRQ request succeeded IRQ-NUM= %d\n", - wl->dev_irq_num); + if (ret) { + netdev_err(dev, "Failed to request IRQ [%d]\n", ret); + return ret; + } + netdev_dbg(dev, "IRQ request succeeded IRQ-NUM= %d\n", wl->dev_irq_num); - return ret; + return 0; } static void deinit_irq(struct net_device *dev) @@ -501,7 +493,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif) if (ret) goto fail_wilc_wlan; - if (wl->gpio_irq && init_irq(dev)) { + if (wl->dev_irq_num && init_irq(dev)) { ret = -EIO; goto fail_threads; } diff --git a/drivers/staging/wilc1000/netdev.h b/drivers/staging/wilc1000/netdev.h index e3689e2a4abb..61cbec674a62 100644 --- a/drivers/staging/wilc1000/netdev.h +++ b/drivers/staging/wilc1000/netdev.h @@ -209,7 +209,6 @@ struct wilc { const struct wilc_hif_func *hif_func; int io_type; s8 mac_status; - struct gpio_desc *gpio_irq; struct clk *rtc_clk; bool initialized; int dev_irq_num; diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c index 2301e90c21ca..44b426874c1b 100644 --- a/drivers/staging/wilc1000/sdio.c +++ b/drivers/staging/wilc1000/sdio.c @@ -8,6 +8,7 @@ #include <linux/mmc/sdio_func.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio.h> +#include <linux/of_irq.h> #include "netdev.h" #include "cfg80211.h" @@ -122,33 +123,32 @@ static int wilc_sdio_probe(struct sdio_func *func, { struct wilc *wilc; int ret; - struct gpio_desc *gpio = NULL; struct wilc_sdio *sdio_priv; sdio_priv = kzalloc(sizeof(*sdio_priv), GFP_KERNEL); if (!sdio_priv) return -ENOMEM; - if (IS_ENABLED(CONFIG_WILC1000_HW_OOB_INTR)) { - gpio = gpiod_get(&func->dev, "irq", GPIOD_IN); - if (IS_ERR(gpio)) { - /* get the GPIO descriptor from hardcode GPIO number */ - gpio = gpio_to_desc(GPIO_NUM); - if (!gpio) - dev_err(&func->dev, "failed to get irq gpio\n"); - } - } - ret = wilc_cfg80211_init(&wilc, &func->dev, WILC_HIF_SDIO, &wilc_hif_sdio); if (ret) { kfree(sdio_priv); return ret; } + + if (IS_ENABLED(CONFIG_WILC1000_HW_OOB_INTR)) { + struct device_node *np = func->card->dev.of_node; + int irq_num = of_irq_get(np, 0); + + if (irq_num > 0) { + wilc->dev_irq_num = irq_num; + sdio_priv->irq_gpio = true; + } + } + sdio_set_drvdata(func, wilc); wilc->bus_data = sdio_priv; wilc->dev = &func->dev; - wilc->gpio_irq = gpio; wilc->rtc_clk = devm_clk_get(&func->card->dev, "rtc_clk"); if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER) @@ -164,10 +164,6 @@ static void wilc_sdio_remove(struct sdio_func *func) { struct wilc *wilc = sdio_get_drvdata(func); - /* free the GPIO in module remove */ - if (wilc->gpio_irq) - gpiod_put(wilc->gpio_irq); - if (!IS_ERR(wilc->rtc_clk)) clk_disable_unprepare(wilc->rtc_clk); @@ -592,9 +588,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume) int loop, ret; u32 chipid; - if (!resume) - sdio_priv->irq_gpio = wilc->dev_irq_num; - /** * function 0 csa enable **/ diff --git a/drivers/staging/wilc1000/spi.c b/drivers/staging/wilc1000/spi.c index dfd25df75780..852f318a86f0 100644 --- a/drivers/staging/wilc1000/spi.c +++ b/drivers/staging/wilc1000/spi.c @@ -151,21 +151,12 @@ static int wilc_bus_probe(struct spi_device *spi) { int ret; struct wilc *wilc; - struct gpio_desc *gpio; struct wilc_spi *spi_priv; spi_priv = kzalloc(sizeof(*spi_priv), GFP_KERNEL); if (!spi_priv) return -ENOMEM; - gpio = gpiod_get(&spi->dev, "irq", GPIOD_IN); - if (IS_ERR(gpio)) { - /* get the GPIO descriptor from hardcode GPIO number */ - gpio = gpio_to_desc(GPIO_NUM); - if (!gpio) - dev_err(&spi->dev, "failed to get the irq gpio\n"); - } - ret = wilc_cfg80211_init(&wilc, &spi->dev, WILC_HIF_SPI, &wilc_hif_spi); if (ret) { kfree(spi_priv); @@ -175,7 +166,7 @@ static int wilc_bus_probe(struct spi_device *spi) spi_set_drvdata(spi, wilc); wilc->dev = &spi->dev; wilc->bus_data = spi_priv; - wilc->gpio_irq = gpio; + wilc->dev_irq_num = spi->irq; wilc->rtc_clk = devm_clk_get(&spi->dev, "rtc_clk"); if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER) @@ -190,10 +181,6 @@ static int wilc_bus_remove(struct spi_device *spi) { struct wilc *wilc = spi_get_drvdata(spi); - /* free the GPIO in module remove */ - if (wilc->gpio_irq) - gpiod_put(wilc->gpio_irq); - if (!IS_ERR(wilc->rtc_clk)) clk_disable_unprepare(wilc->rtc_clk); diff --git a/drivers/staging/wilc1000/wlan.h b/drivers/staging/wilc1000/wlan.h index 5999c5490ea5..7689569cd82f 100644 --- a/drivers/staging/wilc1000/wlan.h +++ b/drivers/staging/wilc1000/wlan.h @@ -206,7 +206,6 @@ #define WILC_TX_BUFF_SIZE (64 * 1024) #define MODALIAS "WILC_SPI" -#define GPIO_NUM 0x44 #define WILC_PKT_HDR_CONFIG_FIELD BIT(31) #define WILC_PKT_HDR_OFFSET_FIELD GENMASK(30, 22) -- 2.24.0 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
