Instead of parsing GPIO for two exceptions inside the logic
which would be trying to use the GPIO, move the init code
to the routine which adds a new gmin device.
Move the notes to it too, as this helps to identify where
those two GPIO settings are used, explaining why they're
defaulting to -1 when not found.
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../media/atomisp/pci/atomisp_gmin_platform.c | 86 +++++++++----------
1 file changed, 40 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 3136759bf96f..1a1a6a9ee8a3 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -83,6 +83,9 @@ struct gmin_subdev {
bool v1p2_on;
bool v2p8_vcm_on;
+ int v1p8_gpio;
+ int v2p8_gpio;
+
u8 pwm_i2c_addr;
/* For PMIC AXP */
@@ -122,24 +125,6 @@ static const struct atomisp_platform_data pdata = {
.subdevs = pdata_subdevs,
};
-/*
- * Something of a hack. The ECS E7 board drives camera 2.8v from an
- * external regulator instead of the PMIC. There's a gmin_CamV2P8
- * config variable that specifies the GPIO to handle this particular
- * case, but this needs a broader architecture for handling camera
- * power.
- */
-enum { V2P8_GPIO_UNSET = -2, V2P8_GPIO_NONE = -1 };
-static int v2p8_gpio = V2P8_GPIO_UNSET;
-
-/*
- * Something of a hack. The CHT RVP board drives camera 1.8v from an
- * external regulator instead of the PMIC just like ECS E7 board, see the
- * comments above.
- */
-enum { V1P8_GPIO_UNSET = -2, V1P8_GPIO_NONE = -1 };
-static int v1p8_gpio = V1P8_GPIO_UNSET;
-
static LIST_HEAD(vcm_devices);
static DEFINE_MUTEX(vcm_lock);
@@ -561,6 +546,23 @@ static struct gmin_subdev *gmin_subdev_add(struct
v4l2_subdev *subdev)
else
dev_info(dev, "will handle gpio1 via ACPI\n");
+ /*
+ * Those are used only when there is an external regulator apart
+ * from the PMIC that would be providing power supply, like on the
+ * two cases below:
+ *
+ * The ECS E7 board drives camera 2.8v from an external regulator
+ * instead of the PMIC. There's a gmin_CamV2P8 config variable
+ * that specifies the GPIO to handle this particular case,
+ * but this needs a broader architecture for handling camera power.
+ *
+ * The CHT RVP board drives camera 1.8v from an* external regulator
+ * instead of the PMIC just like ECS E7 board.
+ */
+
+ gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1);
+ gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1);
+
/*
* FIXME:
*
@@ -843,26 +845,22 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int
on)
dev = &client->dev;
- if (v1p8_gpio == V1P8_GPIO_UNSET) {
- v1p8_gpio = gmin_get_var_int(dev, true,
- "V1P8GPIO", V1P8_GPIO_NONE);
- if (v1p8_gpio != V1P8_GPIO_NONE) {
- pr_info("atomisp_gmin_platform: 1.8v power on GPIO
%d\n",
- v1p8_gpio);
- ret = gpio_request(v1p8_gpio, "camera_v1p8_en");
- if (!ret)
- ret = gpio_direction_output(v1p8_gpio, 0);
- if (ret)
- pr_err("V1P8 GPIO initialization failed\n");
- }
+ if (gs->v1p8_gpio >= 0) {
+ pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n",
+ gs->v1p8_gpio);
+ ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en");
+ if (!ret)
+ ret = gpio_direction_output(gs->v1p8_gpio, 0);
+ if (ret)
+ pr_err("V1P8 GPIO initialization failed\n");
}
if (!gs || gs->v1p8_on == on)
return 0;
gs->v1p8_on = on;
- if (v1p8_gpio >= 0)
- gpio_set_value(v1p8_gpio, on);
+ if (gs->v1p8_gpio >= 0)
+ gpio_set_value(gs->v1p8_gpio, on);
if (gs->v1p8_reg) {
regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000);
@@ -905,26 +903,22 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int
on)
dev = &client->dev;
- if (v2p8_gpio == V2P8_GPIO_UNSET) {
- v2p8_gpio = gmin_get_var_int(dev, true,
- "V2P8GPIO", V2P8_GPIO_NONE);
- if (v2p8_gpio != V2P8_GPIO_NONE) {
- pr_info("atomisp_gmin_platform: 2.8v power on GPIO
%d\n",
- v2p8_gpio);
- ret = gpio_request(v2p8_gpio, "camera_v2p8");
- if (!ret)
- ret = gpio_direction_output(v2p8_gpio, 0);
- if (ret)
- pr_err("V2P8 GPIO initialization failed\n");
- }
+ if (gs->v2p8_gpio >= 0) {
+ pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n",
+ gs->v2p8_gpio);
+ ret = gpio_request(gs->v2p8_gpio, "camera_v2p8");
+ if (!ret)
+ ret = gpio_direction_output(gs->v2p8_gpio, 0);
+ if (ret)
+ pr_err("V2P8 GPIO initialization failed\n");
}
if (!gs || gs->v2p8_on == on)
return 0;
gs->v2p8_on = on;
- if (v2p8_gpio >= 0)
- gpio_set_value(v2p8_gpio, on);
+ if (gs->v2p8_gpio >= 0)
+ gpio_set_value(gs->v2p8_gpio, on);
if (gs->v2p8_reg) {
regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000);
--
2.26.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
