Hey guys I always use this manual for SSL. Very detailed config files settings https://repozitar.fhv.uniza.sk/handle/1234/282
четвер, 20 лютого 2025 р. о 00:10:16 UTC+2 Fedoryo пише: > sorry, I have a beginner question, I don't quite understand what ip or url > go in local.cfg and conf.prod.yml.can anyone explain me?.thanks for > everything. > El lunes, 10 de febrero de 2025 a la(s) 2:25:38 p.m. UTC-3, DSpace > Community escribió: > >> Hi, >> >> I'd highly recommend following the installation guide in the official >> Documentation at >> https://wiki.lyrasis.org/display/DSDOC8x/Installing+DSpace >> >> Specifically, there are guides in that document for how to enable HTTPS >> support for production (see step 16 of the Backend installation and step 8 >> of the Frontend installation). >> >> We highly recommend using a proxy (either Apache HTTPD or Nginx), as that >> will make your entire configuration a *lot easier*...and you won't need to >> run everything off of ports 8080 and 4000. You will also need to create >> and install an SSL certificate in order to move to HTTPS. It's unclear if >> you have done so, but again there are guidelines in the official >> documentation. >> >> Tim >> >> On Monday, January 20, 2025 at 6:39:51 PM UTC-6 [email protected] >> wrote: >> >>> Dear Team, >>> >>> I'm having a hard time trying to implement DSpace 8 for my >>> university. So far, I've created this brief documentation of the current >>> error. This is my first post here, so I'm really grateful for your >>> attention and any comments you might have. >>> >>> Virtual Machine Configuration: >>> >>> - >>> >>> Memory: 12.00GB >>> - >>> >>> Processors: 6 (1 socket, 6 cores) >>> - >>> >>> BIOS: Default (SeaBIOS) >>> - >>> >>> Machine: Default (1440fx) >>> - >>> >>> SCSI Controller: VirtIO SCSI >>> - >>> >>> ISO: Ubuntu_Desktop_22.04.iso >>> - >>> >>> DSpace Version: DSpace 8.0 Back-End/Front-End >>> - >>> >>> Yarn Version: 1.22.22 >>> - >>> >>> Node Version: 18.13.0 >>> - >>> >>> Test 01: Default Settings >>> >>> config.yml >>> >>> dspace.cfg >>> >>> test:rest >>> >>> Result: >>> >>> Both the back-end and front-end function normally, but without HTTPS. >>> >>> Test 02: Changing the REST URL to the URL >>> >>> config.yml >>> >>> dspace.cfg >>> >>> >>> test:rest >>> >>> Result: >>> >>> The UI does not load correctly. >>> >>> Upon removing ":4000" from dspace.cfg, the issue persists. >>> >>> Observations: >>> >>> We noticed that during testing, ":8080" is allocated in the URL to >>> access the server, which creates potential redundancy, as the server is >>> running normally at the correct URL. >>> >>> Test 03: Changing the REST URL to HTTPS >>> >>> Result: The same results as the previous test. Even after changing >>> dspace.cfg to HTTPS, the test connection continues to show HTTP. (If SSL is >>> activated, it uses HTTPS.) >>> >>> Test 04: UI on the URL and REST on the IP >>> >>> test:rest: >>> >>> Resultado: >>> >>> While investigating "200.137.5.231," I decided to revert to a snapshot >>> for testing. The error persists, but with the machine's previous IP >>> address. I attempted to use lsof to stop old processes on the port, but >>> without success. >>> >>> antigo na porta, mas nao obtive sucesso >>> >>> Sources about the error: >>> >>> https://groups.google.com/g/dspace-tech/c/O2nvMaAbOjk >>> >>> I tested the solution from this thread, but it was not effective. >>> Test 05: UI and REST on the URL with HTTPS >>> >>> config.yml >>> >>> dspace.cfg >>> >>> test:rest >>> >>> resultado: >>> >>> observações: NDA >>> >>> -- All messages to this mailing list should adhere to the Code of Conduct: https://www.lyrasis.org/about/Pages/Code-of-Conduct.aspx --- You received this message because you are subscribed to the Google Groups "DSpace Community" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/dspace-community/354a95e1-0347-48aa-83e6-d5eb7947f4a9n%40googlegroups.com.
