Hi,
I'll check the issues :) Can't assure I'll do it today, but ASAP.
Cheers,
Pere
On Mon, Aug 30, 2010 at 4:07 PM, TAYLOR Robin <robin.tay...@ed.ac.uk> wrote:
> Hi Tim,
>
> Thanks for the reply. I have had a quick look at the failures that I get
> but you don't and they are performance type tests which explains why its not
> consistent...
>
> Tests run: 2, Failures: 0, Errors: 2, Skipped: 0, Time elapsed: 44.134 sec
> <<< FAILURE!
> testCountItems(org.dspace.content.CommunityCollectionIntegrationTest) Time
> elapsed: 29.797 sec <<< ERROR!
> org.databene.contiperf.PerfTestFailure: Average execution time of
> org.dspace.content.CommunityCollectionIntegrationTest.testCountItems
> exceeded the requirement of 333 ms, measured 593.86 ms
>
> The other failures are Exceptions thrown because the eperson does not have
> admin authority. I'll track down Pere and see if he can help and I'll raise
> a Jira for any required changes.
>
> Cheers, Robin.
>
>
>
>
> Robin Taylor
> Main Library
> University of Edinburgh
> Tel. 0131 6513808
>
> > -----Original Message-----
> > From: Tim Donohue [mailto:tdono...@duraspace.org]
> > Sent: 30 August 2010 15:44
> > To: TAYLOR Robin
> > Cc: dspace-devel Developers; Pere Villega
> > Subject: Re: [Dspace-devel] Unit tests failures
> >
> > Hi Robin & all,
> >
> > I actually get different results as Robin when I run the
> > following from [dspace-src]/dspace-test/
> >
> > mvn package -Dmaven.test.skip=false
> >
> > I still get failures, but I only see four failures:
> >
> > Results :
> >
> > Tests in error:
> > testEquals(org.dspace.content.CommunityTest)
> > testCreateAuth(org.dspace.content.CommunityTest)
> > testAddSubcommunityAuth(org.dspace.content.CommunityTest)
> > testRemoveSubcommunityAuth(org.dspace.content.CommunityTest)
> >
> > Tests run: 500, Failures: 0, Errors: 4, Skipped: 0
> >
> > This is based on the absolute latest Trunk (revision 5302).
> >
> > Perhaps we should enter these issues into JIRA for review by
> > Pere or whoever else can get to it?
> >
> > BTW -- I don't seem to be able to run 'mvn test' to run the
> > tests, as described in Pere's wiki docs (it always returns
> > 'tests are skipped').
> > I always have to run 'mvn package -Dmaven.test.skip=false'
> > directly from the 'dspace-test' directory.
> >
> > - Tim
> >
> >
> > On 8/30/2010 8:12 AM, TAYLOR Robin wrote:
> > > I'm getting the following failures in the unit tests and
> > wondered if anyone had already fixed them. I'm being lazy
> > here so if I don't get any replies then I'll get my finger
> > out and investigate.
> > >
> > > Cheers, Robin.
> > >
> > >
> > > Results :
> > >
> > > Tests in error:
> > > testEquals(org.dspace.content.CommunityTest)
> > > testCreateAuth(org.dspace.content.CommunityTest)
> > > testAddSubcommunityAuth(org.dspace.content.CommunityTest)
> > > testRemoveSubcommunityAuth(org.dspace.content.CommunityTest)
> > >
> > testCountItems(org.dspace.content.CommunityCollectionIntegrationTest)
> > >
> > >
> > testCreateTree(org.dspace.content.CommunityCollectionIntegrationTest)
> > >
> > > Tests run: 500, Failures: 0, Errors: 6, Skipped: 0
> > >
> > >
> > >
> > > Robin Taylor
> > > Main Library
> > > University of Edinburgh
> > > Tel. 0131 6513808
> >
> --
> The University of Edinburgh is a charitable body, registered in
> Scotland, with registration number SC005336.
>
>
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Dspace-devel mailing list
Dspace-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dspace-devel
