OK, I'm finished with one Dspace project and now working on another. I have Dspace 6 successfully running on Ubuntu 16.04 on Amazon's AWS:
http://35.166.163.205:8080/xmlui/ I previously had an Omeka-based site here but thought that Dspace is more suited for what I needed to get done. The last thing I need to do is to setup the DNS records accurately. I've looking through the documentation for Jetty9 and it's a little confusing on how to run Jetty on port 80. I know I can uncomment the line in /etc/default/jetty9 to authbind (needed to run on ports lower than 1023): # If you run Jetty on port numbers that are all higher than 1023, then you # do not need authbind. It is used for binding Jetty to lower port numbers. # (yes/no, default: no) AUTHBIND=yes And change the port setting in /etc/jetty9/start.ini: # HTTP port to listen on # Enable authbind in /etc/default/jetty9 to use a port lower than 1024 jetty.port=80 But that doesn't work alone, I think because I'm running Jetty as a non-root user (i.e., Dspace). So I really want to accomplish two things (to get my DNS records to work): 1. Run Jetty under TCP 80. 2. Change the root directory to point to /xmlui. I found this section in the Jetty9 documentation but I don't know which option to use: http://www.eclipse.org/jetty/documentation/current/setting-port80-access.html Any advice/ideas? David -- You received this message because you are subscribed to the Google Groups "DSpace Technical Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/dspace-tech. For more options, visit https://groups.google.com/d/optout.
