El domingo, 24 de octubre de 2021 a las 19:03:53 UTC-5, NELP SOFT escribió:
> [image: 1.JPG]
>
> [image: 2.JPG]
> the error happens with tomca9.
>
>
--
All messages to this mailing list should adhere to the Code of Conduct:
https://www.lyrasis.org/about/Pages/Code-of-Conduct.aspx
---
You received this message because you are subscribed to the Google Groups
"DSpace Technical Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/dspace-tech/3ecb3913-b089-4974-a3a1-49fe8079a35en%40googlegroups.com.
# EXAMPLE "local.cfg" for DSpace.
#
# Any configurations added to this file will automatically OVERRIDE
configurations
# of the same name in any of the DSpace *.cfg files. This includes overriding
# settings in any of these files:
# * [dspace]/config/dspace.cfg
# * Any configuration file that is included in 'dspace.cfg'
# (See "include = [filepath]" settings near the end of dspace.cfg.
# By default, it includes all [dspace]/config/modules/*.cfg files)
# * Spring Boot's application.properties
#
([dspace-src]/dspace-server-webapp/src/main/resources/application.properties)
#
# By default, this EXAMPLE file includes a number of commonly overridden
configurations.
# * ADD configurations by simply copying them into this file from any existing
*.cfg file.
# * REMOVE configurations by simply commenting them out or deleting them below.
#
# Any commented out settings in this file are simply ignored. A configuration
# will only override another configuration if it has the EXACT SAME key/name.
# For example, including "dspace.dir" in this local.cfg will override the
# default value of "dspace.dir" in the dspace.cfg file.
# Similarly, including "oai.solr.url" in this local.cfg will override the
# default value of "oai.solr.url" in the modules/oai.cfg file.
#
##########################
# SERVER CONFIGURATION #
##########################
# DSpace installation directory.
# This is the location where you want to install DSpace.
# Windows note: Please remember to use forward slashes for all paths (e.g.
C:/dspace)
dspace.dir=/opt/dspace
# URL of DSpace backend ('server' webapp). Include port number etc.
# DO NOT end it with '/'.
# This is where REST API and all enabled server modules (OAI-PMH, SWORD,
# SWORDv2, RDF, etc) will respond.
dspace.server.url = http://localhost:8080/server
# URL of DSpace frontend (Angular UI). Include port number etc.
# DO NOT end it with '/'.
# This is used by the backend to provide links in emails, RSS feeds, Sitemaps,
# etc.
dspace.ui.url = http://localhost:4000
# Name of the site
dspace.name = DSpace at My University
# assetstore.dir, look at DSPACE/config/spring/api/bitstore.xml for more options
# default is ${dspace.dir}/assetstore, uncomment and modify if you need to use
a different path
#assetstore.dir = ${dspace.dir}/assetstore
# Default language for metadata values
#default.language = en_US
# Solr server/webapp.
# DSpace uses Solr for all search/browse capability (and for usage statistics).
# Since DSpace 7, SOLR must be installed as a stand-alone service
solr.server = http://localhost:8983/solr
##########################
# DATABASE CONFIGURATION #
##########################
# DSpace only supports two database types: PostgreSQL or Oracle
# URL for connecting to database
# * Postgres template: jdbc:postgresql://localhost:5432/dspace
# * Oracle template: jdbc:oracle:thin:@//localhost:1521/xe
db.url = jdbc:postgresql://localhost:5432/dspace
# JDBC Driver
# * For Postgres: org.postgresql.Driver
# * For Oracle: oracle.jdbc.OracleDriver
db.driver = org.postgresql.Driver
# Database Dialect (for Hibernate)
# * For Postgres:
org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect
# * For Oracle: org.hibernate.dialect.Oracle10gDialect
db.dialect =
org.dspace.storage.rdbms.hibernate.postgres.DSpacePostgreSQL82Dialect
# Database username and password
db.username = dspace
db.password = polosoft
# Database Schema name
# * For Postgres, this is often "public" (default schema)
# * For Oracle, schema is equivalent to the username of your database
account,
# so this may be set to ${db.username} in most scenarios.
db.schema = public
# Enable (true) or disable (false) OAI-PMH server
oai.enabled = true
# When enabled, OAI-PMH server is available at this path
oai.path = oai
oai.storage=solr
oai.url = ${dspace.server.url}/${oai.path}
oai.solr.url=${solr.server}/oai
oai.bitstream.baseUrl = ${dspace.ui.url}
oai.config.dir = ${dspace.dir}/config/crosswalks/oai
oai.cache.enabled = true
oai.cache.dir = ${dspace.dir}/var/oai
## Connection pool parameters
# Maximum number of DB connections in pool (default = 30)
#db.maxconnections = 30
# Maximum time to wait before giving up if all connections in pool are busy
(milliseconds)
# (default = 5000ms or 5 seconds)
#db.maxwait = 5000
# Maximum number of idle connections in pool (-1 = unlimited)
# (default = 10)
#db.maxidle = 10
#######################
# EMAIL CONFIGURATION #
#######################
# SMTP mail server (allows DSpace to send email notifications)
#mail.server = smtp.example.com
# SMTP mail server authentication username and password (if required)
#mail.server.username = myusername
#mail.server.password = mypassword
# SMTP mail server alternate port (defaults to 25)
#mail.server.port = 25
# From address for mail
# All mail from the DSpace site will use this 'from' address
#mail.from.address = [email protected]
# When feedback is submitted via the Feedback form, it is sent to this address
# Currently limited to one recipient!
#feedback.recipient = [email protected]
# General site administration (Webmaster) e-mail
#mail.admin = [email protected]
# Recipient for server errors and alerts (defaults to mail.admin)
#alert.recipient = ${mail.admin}
# Recipient for new user registration emails (defaults to unspecified)
#registration.notify =
########################
# HANDLE CONFIGURATION #
########################
#
# Canonical Handle URL prefix
#
# Items in DSpace receive a unique URL, stored in dc.identifier.uri
# after it is generated during the submission process.
#
# If you register with CNRI's handle service at http://www.handle.net/,
# these links can be generated as permalinks using http://hdl.handle.net/
# as canonical prefix. Please make sure to change handle.canonical.prefix
# after registering with handle.net by uncommenting one of the following
# lines, depending if you prefer to use http or https:
# handle.canonical.prefix = http://hdl.handle.net/
# handle.canonical.prefix = https://hdl.handle.net/
#
# Note that this will not alter dc.identifer.uri metadata for existing
# items (only for subsequent submissions), but it will alter the URL
# in JSPUI's 'identifier' message on item record pages for existing items.
# CNRI Handle prefix
# (Defaults to a dummy/fake prefix of 123456789)
#handle.prefix = 123456789
#######################
# PROXY CONFIGURATION #
#######################
# Uncomment and specify both properties if proxy server is required for
external http requests
# (e.g. requests from DSpace to third party services like Creative Commons use
this setting when enabled)
# Use regular hostname without port number
#http.proxy.host =
# port number of proxy server
#http.proxy.port =
##########################
# AUTHENTICATION METHODS #
##########################
# EXAMPLE OVERRIDE:
# Override the default authentication method(s) defined in authentication.cfg
# by defining your own custom ordered list in this local.cfg.
#
# By default, all of these methods are commented out and DSpace will use the
# settings from authentication.cfg. But you may uncomment whichever plugins you
# need in order to change the default settings (or reorder them below).
#
# You may also copy default settings from the corresponding authentication-*.cfg
# configuration file and override them in this local.cfg.
# IP-based authentication/authorization. See authentication-ip.cfg for default
configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod =
org.dspace.authenticate.IPAuthentication
# LDAP authentication/authorization. See authentication-ldap.cfg for default
configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod =
org.dspace.authenticate.LDAPAuthentication
# Shibboleth authentication/authorization. See authentication-shibboleth.cfg
for default configuration.
# Check also the cors settings below
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod =
org.dspace.authenticate.ShibAuthentication
# X.509 certificate authentication. See authentication-x509.cfg for default
configuration.
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod =
org.dspace.authenticate.X509Authentication
# Authentication by Password (encrypted in DSpace's database). See
authentication-password.cfg for default configuration.
# Enabled by default in authentication.cfg
#plugin.sequence.org.dspace.authenticate.AuthenticationMethod =
org.dspace.authenticate.PasswordAuthentication
#####################
# REST API SETTINGS #
#####################
# Allowed Cross-Origin-Resource-Sharing (CORS) origins (in
"Access-Control-Allow-Origin" header).
# Only these origins (client URLs) can successfully authenticate with your REST
API.
# Defaults to ${dspace.ui.url} if unspecified (as the UI must have access to
the REST API).
# Multiple allowed origin URLs may be comma separated. Wildcard value (*) is
NOT SUPPORTED.
# (Requires reboot of servlet container, e.g. Tomcat, to reload)
# When an external authentication system is involved like Shibboleth some
browsers (i.e. Safari) include
# in the request the Origin header with the url of the IdP. In such case you
need to allow also the IdP to
# avoid trouble for such browsers (i.e. rest.cors.allowed-origins =
${dspace.ui.url}, https://samltest.id )
#rest.cors.allowed-origins = ${dspace.ui.url}
#################################################
# SPRING BOOT SETTINGS (Used by Server Webapp) #
#################################################
# NOTE: Common Spring Boot application settings may be found at
#
http://docs.spring.io/spring-boot/docs/current/reference/html/common-application-properties.html
#
# EXAMPLE OVERRIDE:
# By uncommenting the below Spring Boot settings, you can increase or decrease
the maximum upload size.
# These defaults are specified in
[dspace-src]/dspace-server-webapp/src/main/resources/application.properties
# but may be overridden in this local.cfg
#
# Maximum size of a single uploaded file
#spring.servlet.multipart.max-file-size = 512MB
# Maximum size of a multipart request (i.e. max total size of all files in one
request)
#spring.servlet.multipart.max-request-size = 512MB
