Hi Lisle, The error you are hitting looks to be one in our "Common Installation Issues" section at the bottom of the "Installing DSpace" instructions.
https://wiki.lyrasis.org/display/DSDOC7x/Installing+DSpace#InstallingDSpace-%22XMLHttpRequest..hasbeenblockedbyCORSpolicy%22or%22CORSerror%22or%22InvalidCORSrequest%22 Try out the suggestions there. It's likely a configuration error on the *backend* in your local.cfg, as you'll see in those suggestions. Tim On Friday, February 18, 2022 at 10:33:18 AM UTC-6 Lisle Waldron wrote: > Hello all (again), > > I'm on the final stage of this epic server walk and keep hitting my head > on the proverbial wall. I'm acclimating self to the install and felt pretty > good about my progress until the error of the last 48 hours. For some > context... I'm really (for now) just helping the library and I'm setting up > Dspace for them to begin testing. I'd have done the Docker install - and it > was *a little easier *but I was not able to figure out how to get > external devices on the LAN to get into the Docker instance - so I decided > to just go full blow and install it the 'long' way. Inevitably if I'm > called on to do the production instance it's a closer estimation of the > work that I'd have to do anyway. So here I am but I have a configuration > issue that's resulting in me not being able to move any further and I'm out > of ideas. > > The issue? The first was that I wasn't even getting a page to load > (Almalinux VM in a bridge mode with it's own IP on the LAN) from any other > device on the LAN if these files were configured using 'localhost': > /opt/dspace-angular/config/config.prod.yml > /opt/DSpace-dspace-7.2/dspace/config/local.cfg > /opt/DSpace-dspace-7.2/dspace/config/local.cfg > /opt/DSpace-dspace-7.2/dspace/target/dspace-installer/config/local.cfg > > I found a partial(?)(I think) explanation of *this issue *here: > https://groups.google.com/g/dspace-tech/c/DXRdx0vO-TA/m/xmkYieWHEgAJ. I > say partial because it got be from the refused to connect to a page loading > a 500 error. The console error is: > > Access to XMLHttpRequest at 'http://192.168.5.156:8080/server/api' from > origin 'http://192.168.5.156:4000' has been blocked by CORS policy: > Response to preflight request doesn't pass access control check: No > 'Access-Control-Allow-Origin' header is present on the requested resource. > > So then I looked at this: > https://wiki.lyrasis.org/display/DSDOC7x/User+Interface+Configuration but > couldn't get any further forward. Mohammed's guidance from this > https://groups.google.com/g/dspace-tech/c/DXRdx0vO-TA/m/TeIZwpujEgAJ was > a help but I can't seem to either translate it properly for 7.2 or it's > just not the issue. > > Currently my config.prod.yml looks like this: > > ui: > ssl: false > host: 192.168.5.156 > port: 4000 > # NOTE: Space is capitalized because 'namespace' is a reserved string in > TypeScript > nameSpace: / > # The rateLimiter settings limit each IP to a 'max' of 500 requests per > 'windowMs' (1 minute). > rateLimiter: > windowMs: 60000 # 1 minute > max: 500 # limit each IP to 500 requests per windowMs > > rest: > ssl: false > host: 192.168.5.156 > port: 8080 > # NOTE: Space is capitalized because 'namespace' is a reserved string in > TypeScript > nameSpace: /server > > Any ideas? At a minimum I definitely searched the interwebs and the forum > before posting lol. > > Thanks in advance and cheers! > Lisle > -- All messages to this mailing list should adhere to the Code of Conduct: https://www.lyrasis.org/about/Pages/Code-of-Conduct.aspx --- You received this message because you are subscribed to the Google Groups "DSpace Technical Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/dspace-tech/87f93354-2766-4038-95da-ca69ffa143can%40googlegroups.com.
