Here is the process I follow and never have any problems.
During the initial install/implementation of your DSpace instance, you will
make your changes to dspace.cfg in {dspace-source}/dspace/config. Then once
you do a "fresh-install", your /dspace directory is populated with all other
sub-directories like /bin /config /etc /lib /webapps, etc.
>From this point on, the place to make your changes to dspace.cfg is in your
>dspace installation directory, NOT the source directory. If you do not make
>your changes in /dspace/config/dspace.cfg, your changes will not be picked up.
> Also remember that you have to stop and start your web server before these
>changes will be picked up too.
Hope this helps,
Sue
Sue Walker-Thornton
Software Developer/Database Administrator
NASA Langley Research Center|LITES Contract
(757) 224-4074
-----Original Message-----
From: amutsikiwa [mailto:[email protected]]
Sent: Wednesday, February 09, 2011 7:25 AM
To: 'Glenn Little'; [email protected]
Subject: Re: [Dspace-tech] modifying config dspace.cfg
After making changes to [dspace-source]/dspace/config/dspace.cfg, change
directory to [dspace-source]/dspace/ and then run
mvn -e -o packages
Then change directory to
[dspace-source]/dspace/target/dspace-1.7.0-build.dir
And run
ant -Doverwrite=true update clean_backups
The changes should be effected.
Regards,
Admire Mutsikiwa
University of Zimbabwe
-----Original Message-----
From: Glenn Little [mailto:[email protected]]
Sent: Wednesday, February 09, 2011 2:00 AM
To: [email protected]
Subject: [Dspace-tech] modifying config dspace.cfg
I've got an install of dspace and am now trying to modify the
dspace.cfg file. But I'm confused as to which file to edit. I
thought I was supposed to do this:
+ edit [dspace-source]/dspace/config/dspace.cfg
+ change dir to [dspace-source]/dspace/target/dspace-1.7.0-build.dir
+ ant update_configs
The problem is that this does not do anything with my new changes.
Instead it puts an old copy of my dspace.cfg file over into
[dspace]/config/dspace.cfg.new. As far as I can tell, that *old* copy
comes from:
[dspace-source]/dspace/target/dspace-1.7.0-build.dir/config/dspace.cfg
So what is the real intent of the copy in dspace-<version>-build.dir
compared to the one higher up in the source tree? How is one *really*
supposed to update the configuration, post-install?
Thanks...
-glenn
----------------------------------------------------------------------------
--
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
DSpace-tech mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dspace-tech
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
DSpace-tech mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dspace-tech
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
DSpace-tech mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dspace-tech
