Jorge, the CQCQCQ will show up in the dsipsvd because a station is using the following:
URCALL= CQCQCQ RPT1 = local rptr RPT2 = GATEWAY NO HARM no fault (foul) that is an ok output. when using dplus to connect to a reflector or to another repeater, the normal mode of communication would be URCALL = CQCQCQC. PORT TO PORT would be slant bar call sign port ( /KJ4ACNB ) CALL SIGN to CALL SIGN would be just that.... urcall = <call sign> as long as you DO NOT see "time out" from the USROOT, your safe from having to leave for the "HILL". 73 KD4EFM KJ4ACN ADMIN -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Woodrick, Ed Sent: Friday, July 18, 2008 3:31 PM To: [email protected] Subject: RE: [dstar_digital] help needed I'd suggest starting at the basics. Restart the server and make sure that all of the services are running. Then check the DPLUS.log to make sure that it started correctly. If you have the GUI loaded, then try browsing the web. My first recommendation would to be to make sure that DNS is working correctly.
