I have solved the problem using the 92AD with Drats. 1. I had the baud rate set wrong. I had been using Drats with my ID-800H and it uses 9600 and the 92AD uses 38. 2. I did have GPS off 3. When using the rubber duck antenna it caused some RFI problems with my USB/Serial adapter and when I used an external antenna that problem went away. Thanks for your suggestions.. Tom Koch - W4UOC In a message dated 10/14/2008 9:32:38 A.M. Eastern Daylight Time, [EMAIL PROTECTED] writes:
Be sure you have GPS Mode set to OFF. 73 -- John > I have been using DRats on my ID-800H and it works well. I am trying > to use DRats or DChat with the 92AD using the same cable that I use to > program the 92AD from the laptop. It does not seem to work with DRats > or DChat. Is there another cable that I should be using or am I doing > something wrong? **************New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out (http://local.mapquest.com/?ncid=emlcntnew00000002) [Non-text portions of this message have been removed]
