Hi Steve, you mention that your duplexer checks out fine but you don't mention how you checked for correct operation.
Do you happen to know how much isolation the duplexer is providing and how wide the RP-4000V frequency split is (in MHz)? 73 de Darren G7LWT 2009/8/9 Steve Glen <[email protected]> > > > Is there an adjustment for receiver sensitivity on either the RP 2C or the > RP4000V? Once a transmitted signal gets more than about 100 or 200 yards > away from the site we can not key the repeater. We have checked antenna, > duplexer, and feed line and all of those seem to be working well. Once > the repeater is keyed, the transmit side is great with an excellent coverage > area. The issue is at the input side. > > > > Can anyone point me to where an input signal threshold might be set? A > second question is can anyone suggest a good way to measure the signal > required to “key” the repeater? > > > > Feel free to contact me with suggestions here on the list or on at the > above email address. > > > > Thank you in advance! > > > > Steve Mercure > > WU5PIG DStar System. > > > >
