Most of the Open G2 has been released at sourceforge: http://dstardextra.sourceforge.net/ under GPL
The rest of it is being installed at multiple sites with either our RPTR/gmsk program that controls a GMSK RF modem(adapter,node,...) or all ICOM G2 software (dsgwd, dsipsvd) removed and our Open G2 (dstar_g2_gwy, dstar_gw_sync) installed instead to control/talk to the ICOM repeater controller hardware using the ICOM repeater-controller protocol between the G2 and the ICOM repeater-controller. A little patience too. In the "Files" area of http://groups.yahoo.com/group/D_STAR_Open_Source ... We will wait a little longer so that the software can be presented at the International Fair this November, so that it does not get copied by someone else and presented as their own software. ... We have seen attacks from hackers trying to mess up the source code package. So, have some patience folks, 100% of it will be released at sourceforge. We must make sure that it works 100% on the ICOM repeater-controller. It already works with a GMSK RF modem(adapter, node,...) but the discovery of the protocol that is used between the G2 and the ICOM repeater-controller hardware makes it so much more exciting. Currently we are busy taking "orders" and installing it around the country at multiple ICOM G2 hardware sites and also home-brew(GMSK) Linux systems. We must pay attention at the ICOM G2 hardware protocol, because there will be only one version of the Open G2 and it will have an option in its configuration file to run either with a GMSK modem(adapter,node,...) on home-brew Linux PC's or on the ICOM controller hardware. We know you've waited 5 years or so for another group to release an Open Gateway, which of course we do not believe it will ever happen, jugding from the "BINARY only" attitude that these other groups have. At least, with our group, you have seen a completely OPEN SOURCE ADD-ON linking tool "dextra_srv" that links DSTAR G2 gateways to OPEN SOURCE DSTAR Reflectors and you have seen a completely OPEN SOURCE DSTAR Reflector software(dextra_reflect), all of that at http://dstardextra.sourceforge.net/ under GPL, while other groups keep giving you the BINARY stuff to run. 73 The D_STAR_Open_Source group http://groups.yahoo.com/group/D_STAR_Open_Source/
