Use KR4AIKCL to link to the repeater, if you are using a
DVAP. If you are going directly via RF to the repeater, and
If permitted by gateway administrator, set RPT1=KR4AIK C,
RPT2=KR4AIK G and UR=REF002AL to link to reflector (if
repeater is not already linked). Put UR=CQCQCQ once linked.
W8KRF
On 7/26/2010 10:15 AM, Kent Hufford wrote:
No, I am using a ICOM 880 to try and command KR4AIK C to
connect to REF002A.
Someone else said they changed the IP address for REF002,
so the server box has to reboot.
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of
*Donald James
*Sent:* Monday, July 26, 2010 5:15 AM
*To:* [email protected]
*Subject:* RE: [DSTAR_DIGITAL] CAnnot connect to REF002A
Are you using a DVAP, if so, unplug it and then try again.
Weird but that's what I had to do to resolve that problem.
Donald ~ N2VU
-----Original Message-----
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of *Kent
Hufford
*Sent:* Sunday, July 25, 2010 9:38 PM
*To:* [email protected]
*Cc:* 'Charlie Miller'; James F. Boehner MD
*Subject:* [DSTAR_DIGITAL] CAnnot connect to REF002A
Tried to connect KR4AIK C to REF002A, for the SE DSTAR WX
net tonite, and could not.
I could connect to REF001a and REF014A.
Kent
KQ4KK
