Congratulations on getting into D-Star, and for asking about linking etiquette. Steve and Ted pretty much nailed it in their responses. I'll try to add a some additional info. I hope this isn't all old info for you.
As you probably know, the D-Star design and ICOM's implementation is to do callsign routing, and that is explained in each D-Star radio manual. But the beauty of the D-Star architecture is that repeater owners can run additional (including non-ICOM) software on their gateway server. It happens Robin Cutshaw AA4RC designed and wrote such a program called DPlus, which allows a repeater to be linked to another repeater or reflector. It turns out most repeater owners outside Japan have chosen to install DPlus on their gateways, so linking and unlinking are very widely available. As Steve wrote, not all repeater administrators allow normal users to issue link and unlink command, but in my experience, many and probably most do. Anyway, since DPlus linking is not an ICOM feature, that's why you won't read about it in your ICOM radio manuals. The linking is very quick. But since the gmsk protocol used by D-Star places the pertinent info for routing (MyCall, UrCall, RPT1, RPT2) in the headers preceeding the digital voice payload, if you link into a repeater with an in-flight QSO, it's likely, as Steve and Ted pointed out, that the current transmission at the far end will not be routed back to where you are. So it is best to wait until any possible current transmission ends, so the comeback can be routed properly and you'll know a QSO is in progress. How long to wait? Well, I've read some repeater websites that suggest you wait 3 minutes. That is probably safest, and if you have something else to do while waiting, that is probably best. But in reality, I'm not sure most people wait that long. I think most people wait a minute or so. Many repeaters also run a script that checks for inactivity over a link, and after, say, 10 minutes of no use, will automatically unlink and relink to that repeater's default. Others don't do that. If you discover your favorite repeater has a default link and doesn't automatically re-establish it, then when you are finished, you should unlink and link to the default manually. Often the repeater's website will tell what's the normal link. If I'm near a computer and want to link to a new repeater, I first try to bring up its website (not all have one) and see if they have any info specific to their repeater that I should know. I put the following web address in a shortcut on my desktop, so the repeater directory comes up sorted by "state." This makes it easy to search for repeaters in different states. http://www.dstarusers.org/repeaters.php?repeatersort=5 By the way, if at some time you buy a DV Dongle or a DVAP, or if you build yourself a Hotspot, you should know all those depend solely on DPlus linking (they don't support callsign routing). It turns out Robin wrote the software for both the Dongle and the DVAP. Obviously the same etiquette for linking using these devices also applies. Jim - K6JM ----- Original Message ----- From: kc9ony To: [email protected] Sent: Thursday, August 26, 2010 6:55 AM Subject: [DSTAR_DIGITAL] Linking and Unlinking questions Still learning about D-Star here. The other night, we tried linking into one of the popular reflectors. We didn't hear anything, so my buddy called CQ. I seem to think I then heard a partial conversation and then acknowledgement of my buddy's callsign. That brought to mind a few questions: How long does it take for the repeater to connect to the reflector? How long should one wait before trying to initiate a call? So far, in the few times we have done it, no one has yelled at us for interrupting or causing any disruption of data, if that did occur. I just don't want to step on any toes if we are possibly not waiting or listening for a long enough time period. When unlinking, is it necessary to announce to the reflector that you are unlinking? If I want to unlink and not interrupt a conversation, can I just do it? Will they hear a beep and my callsign or does this disrupt the data in any way or just see my callsign with no audio? Just wondering if there is a write up on common courtesy and protocol for D-Star? I know that on the Calculator page, they say to announce your intentions. Obviously, if you are not near a computer or have access to the internet, you can't see how busy or how many things are connected to a repeater or reflector.
