Dear all,
I feel if your routers cannot support SNMP then its
not possible to get/capture the traffic flowing as
polling cannot be perfomed to get info.
It is like eliminating the very purpose of protocol
for whcih it is designed for (management)
Rao
--- GEORGE C JOHN <[EMAIL PROTECTED]> wrote:
> vishweshwar rao wrote:
> > Dear George,
> > Enable the snmp community string on the router by
> > configuring router or existing string can be used.
> > On linux box configure MRTG and get the total
> > information about all traffic flowing through the
> ADSL
> > router
>
> Provided you router :-
> a) does snmp (Which my Belkin does not) &
> b) actually gets it right (Which my Linksys WAG54g
> does not)
>
> The Belkin just flat out does not do it, and the
> Linksys provides grossly incorrect figures, so in
> both cases SNMP is completely useless
>
> Brad
>
> hi,
>
> I have Aztec ADSL router and it does not have SNMP
> option, which i found out after installing MRTG
> ,what are my options now to use mrtg..
>
>
> George
___________________________________________________________
NEW Yahoo! Cars - sell your car and browse thousands of new and used cars
online! http://uk.cars.yahoo.com/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dubailug/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
