I added an entry into my IPTABles using following command steps 1) iptables -A TRUSTED -s 192.168.2.0/24 -d 0/0 -p ALL -j ACCEPT 2) service iptables status 3) service iptables save
Everything is working fine. I can see my entry using service iptables status Entry can also be seen in /etc/sysconfig/iptables File Problem: When I restart my Linux machine, the above entry is not seen when using service iptables status. I have to restart iptables again using below command. service iptables restart. Question: Will the below command help? chkconfig iptables on --- In [email protected], "Nadeem M. Khan" <nadeem.m.k...@...> wrote: > > On Mon, Mar 16, 2009 at 3:56 PM, Varghese Panicker > varghese...@... wrote: > > Hi, > > > > We are using Redhat Fedoracore as proxy server (192.168.0.6 port 3128) > > Lan series we are using is 192.168.0.0. and it is working fine. > > Now we want to add one more series like 192.168.2.0. to connect internet in > > an another location. > > > > We added 192.168.2.0 series in the route. we are able to ping proxy server > > from the other location but are not able to access any sites. > > > > Firewall iptables are configured to accept all TCP traffic from 192.168.2.0 > > > > Can anyone help me > > Varghese, > > You probably need to add squid acls to allow your new network http access. > > acl newnetwork src 192.168.2.0/255.255.255.0 > http_access allow newnetwork > > Add those two lines at the top of your acl section in squid.conf file > and then run the command "squid -k reconfigure" > > Regards, > NMK. >
