Just in case anyone arrives here via google, the duet receiver can quite easily be set to use ethernet. There's a short blog post that describes the process 'here' (http://www.typinganimal.net/wp/2012/05/07/reset-squeezebox-duet-reciever-to-use-wired-connection/). Basically,
- Push the big button on the front of the Duet receiver and hold it down until it flashes red. - Shut off the Duet controller. DO NOT SKIP THIS STEP. - Turn on Duet controller (and select the Duet receiver, if necessary). - The controller will now give you the option of ethernet or wireless connectivity. Select ethernet, and wait a minute while the system runs its DHCP queries. At step 4 I had to 'Switch player' on my duet controller, away from the duet receiver I was trying to set to ethernet, to one of my other squeezeboxes, and then back again. When I switched back I was offered the option to use ethernet. I chose the option and after some seconds the flashing red light on the front of the receiver turned blue. The controller showed the IP address that the receiver has been assigned by my router. ------------------------------------------------------------------------ stuarty's Profile: http://forums.slimdevices.com/member.php?userid=32294 View this thread: http://forums.slimdevices.com/showthread.php?t=98209 _______________________________________________ Duet mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/duet
