whathim wrote: 
> I have a Duet system with LMS running (until recently) on a Windows 7
> desktop computer - all connections, Receiver, Server, everything in
> house, is Ethernet (i.e., wired and wifi disabled on router).  This was
> working fine via the LMS Web Interface (the Duet Controller failed
> several years back - endlessly cycles  “Logitech'”/”Free Your Music”)
> with just one small inconvenience; I always had to activate the Duet
> Controller briefly in order for the Receiver to be recognized after
> restarting the LMS computer from its overnight shutdown.
> 
> Just recently the Windows 7 machine failed and I replaced it with a
> Windows 10 Pro machine.  I downloaded and installed the current LMS from
> https://mysqueezebox.com/download.  Initially all seemed well; the
> familiar green tray icon and Web Interface were back and LMS
> successfully scanned my media (on a NAS).  However, I cannot get the
> Receiver to be recognized.  With the Duet Controller off, the Receiver
> light is solid red.  With the Duet Controller on, the Receiver light is
> blue and stays so.  I understand blue means the Receiver is connected to
> the LAN and waiting to connect to LMS.  To double check, logging into my
> router confirms that the Receiver is indeed visible on my LAN.
> 
> Here’s my dilemma: I initially thought I would use Net:UDAP to configure
> my receiver.  However, after reading and rereading the various posts
> (especially
> https://forums.slimdevices.com/showthread.php?57861-Net-UDAP-SqueezeBox-Receiver-configuration-tool),
> I feel I might be compounding the problem.  This is frustrating: the
> situation is that I haven’t changed anything on the Receiver end so
> surely whatever is stopping the Receiver from being recognized must be
> on the Server end.  I’m thinking (hoping) it might be something quite
> trivial - I would be so grateful for any thoughts on what this could be.

Did you replace the W7 box with W10 and then switch IPs? You want the
new W10 box to have the same IP as the old W7 box had although I would
expect auto-discovery to work.



Jim
https://jukeradio.double6.net


VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas  -> Onkyo TXNR686 -> Celestion F20s

*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s 
*Dining Room* SB Radio
*Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s +
Kef ceiling speakers
*Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes
------------------------------------------------------------------------
d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=115319

_______________________________________________
Duet mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/duet

Reply via email to