Dear Lorenzo,
for the water oil system that is stated in the handbook 2.12, you have
the relationship
that p_o = p_c + p_w. Therefore, inserting this relationship into
equation (3.2) you end up
in the same equations you sent. Therefore, you can easily transform the
equations into your formulation.
Please not that in Dumux capillary pressure is included by default.
Regards,
Martin
On 10/17/2018 03:43 PM, lc wrote:
Dear developers and users,
looking at equations 3.1 and 3.2 of the handbook 2.12 it seems that no
capillarity effect is taken into account.
Indeed, I would expect something like the equations reported in the
attachment. Nevertheless,
values for capillarity pressure are loaded in the example. So, are
they taken into account? Which equations are solved?
If they are not taken into account, what should modify to include them?
Kind regards,
Lorenzo
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
M.Sc. Martin Schneider
University of Stuttgart
Institute for Modelling Hydraulic and Environmental Systems
Department of Hydromechanics and Modelling of Hydrosystems
Pfaffenwaldring 61
D-70569 Stuttgart
Tel: (+49) 0711/ 685-69159
Fax: (+49) 0711/ 685-60430
E-Mail: [email protected]
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
