Dear Max,
thank you for that information. We get the same wrong solution on our
current master. If you check out the tag 3.0.0-alpha, there you should
obtain better results. That is our last release from last December and
there we did not have that problems then. Unfortunately the problems on
the current master do not seem to be too easy to fix. We will look into
it and hopefully fix it soon.
Best wishes,
Katharina
On 10/26/2018 11:37 AM, Maximilian Johannes Lueftner wrote:
Dear Martin,
thanks for the quick help, the simulation is now running.
Unfortunately, I get very unphysical temperatures. Behind the porous
area, after 0.1m, the temperature rises up to over 50000K(depends on
the grid).
I have already searched for the problem myself, but unfortunately
without success. The results also differ from those in the Solution
folder.
Could you please help me again?
Thank you in advance and best regards,
Max
Zitat von Martin Schneider <[email protected]>:
Dear Max,
I had a look at the test case and I got the same message.
The problem is that the grids folder is missing in your build-cmake
directory
where you run your tests.
This can be easily fixed by putting the following command into your
*CMakeLists.txt* file (in the directory
*porousmediumflow/mpnc/implicit/*):
*dune_symlink_to_source_files(FILES grids)*
After you have added this command you have to type *make* in your
build-cmake folder
such that a link to your grid files is added.
Thanks for reporting this issue. It will be fixed soon.
I hope this helps. Best regards,
Martin
On 10/19/2018 04:36 PM, Maximilian Johannes Lueftner wrote:
Dear DuMuX experts,
i try to calculate the simulation from the test folder
„porousmediumflow/mpnc/implicit/test_boxmpncthermalnonequil.cc" and
get the following error message:
DGF exception thrown (DGFException
[BasicBlock:/home/max/dumux3/dumux/dune-grid/dune/grid/io/file/dgfparser/blocks/basic.cc:28]:
file not found in BasicBlock::BasicBlock). Most likely, the DGF file
name is wrong or the DGF file is corrupted, e.g. missing hash at end
of file or wrong number (dimensions) of entries. ---> Abort!
Could you please help me to solve this problem? I tried it myself
several times but was not successful until now.
Thank you in advance and best regards,
Max
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
_______________________________________________________________
Katharina Heck phone: +49 711 685 64719
IWS, Universität Stuttgart fax: +49 711 685 54719
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
