Hi Samuel,
did you delete the build folders before you reran dunecontrol?
Also you can just leave out the whole line with
DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS
because the default should be false.
Timo
On 09.04.19 11:49, Samuel Scherrer wrote:
Hi Bernd,
Yes, I set "-DDUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS:BOOL=FALSE" in
cmake.opts and ran
dune-common/bin/dunecontrol --opts=cmake.opts all
Kind regards,
Samuel
On Tue, 2019-04-09 at 09:32 +0000, Flemisch, Bernd wrote:
Did you leave the ":BOOL" like in
-DDUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS:BOOL=FALSE
?
Kind regards
Bernd
--
_______________________________________________________________
Bernd Flemisch phone: +49 711 685 69162
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
Von: Samuel Scherrer <[email protected]>
Gesendet: Dienstag, 9. April 2019 10:49:39
An: Flemisch, Bernd; DuMuX User Forum
Betreff: Re: AW: [DuMuX] How to get intersections from scvf and
element?
Hi Bernd,
I had trouble installing UGGrid, so I would prefer using ALUGrid.
However, disabling the code for ALUGrid in boundaryflag.hh does the
trick, but I'm having trouble setting
DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS to false. At the moment I just
added '&& 0' in dumux/common/boundaryflag.hh.
When I add COMPILE_DEFINITIONS
DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS=0
in the dune_add_test section of my CMakeLists.txt I get the following
warning:
/home/samuel/dumux/dumux-vegas-geothermal/build-cmake/config.h:269:0:
warning: "DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS" redefined
#define DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS 1
Best regards,
Samuel
On Tue, 2019-04-09 at 05:47 +0000, Flemisch, Bernd wrote:
Actually, it might work also for ALUGrid
if DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS is set to _false_ because
that triggers the default behavior of boundaryFlag().
Bernd
--
_______________________________________________________________
Bernd Flemisch phone: +49 711 685 69162
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
Von: Dumux <[email protected]> im Auftrag von
Flemisch, Bernd <[email protected]>
Gesendet: Montag, 8. April 2019 23:55:11
An: DuMuX User Forum; Samuel Scherrer
Betreff: Re: [DuMuX] How to get intersections from scvf and
element?
Martin is right about the boundaryId. I guess that means it doesn't
work with ALUGrid like this at the moment. For other grids,
scvf.boundaryFlag()
should return the boundarySegmentIndex, so
gridData->getBoundaryDomainMarker(scvf.boundaryFlag())
should return the right thing. Are you bound to ALUGrid or can you
try with UGGrid?
Apart from that, we should see how to make things consistent.
Kind regards
Bernd
--
_______________________________________________________________
Bernd Flemisch phone: +49 711 685 69162
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
Von: Dumux <[email protected]> im Auftrag von
Martin Schneider <[email protected]>
Gesendet: Montag, 8. April 2019 22:41:51
An: DuMuX User Forum; Samuel Scherrer
Betreff: Re: [DuMuX] How to get intersections from scvf and
element?
Hi Samuel,
maybe I am wrong but the scvf.boundaryFlag() returns the boundaryId
of AluGrid which is only properly defined if you are using a DGF
grid
file.
The CO2 test uses such a DGF file, which is why it works there.
Maybe having a look at the tests in test/io/gridmanager helps.
Best regards,
Martin
On 08.04.19 19:34, Samuel Scherrer wrote:
Hi Timo, Hi Bernd,
thanks a lot for your help.
I'm compiling the dune modules with the cmake.opts in the dumux
repository, which contains "-
DDUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS:BOOL=True" in
"CMAKE_FLAGS", so
I assume that I don't need any additional changes.
The problem file in co2/implicit looks like what I need. However,
when
using scvf.boundaryFlag() I always get the same value, 1, but
when
I
instead loop over all interfaces of the current element and use
the
'getBoundaryDomainMarker'-function I do get the values I expect.
I'm using the gmsh mesh-format version 2.2 and ALUGrid. Do you
know
what might be going wrong here?
Best regards,
Samuel
On Mon, 2019-04-08 at 18:09 +0200, Timo Koch wrote:
Hi Samuel,
as an addition to Bernd's answer, you might have to set
DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS:BOOL=TRUE
for compiling dune-grid and the grid modules. I'm not sure if
this
is
still required.
Best wishes
Timo
On 08.04.19 17:37, Flemisch, Bernd wrote:
Hi Samuel,
I think that it is given by scvf.boundaryFlag(). Have a look at
https://git.iws.uni-stuttgart.de/dumux-repositories/dumux/blob/master/test/porousmediumflow/co2/implicit/problem.hh
Kind regards
Bernd
--
_______________________________________________________________
Bernd Flemisch phone: +49 711 685 69162
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
Von: Dumux <[email protected]> im Auftrag
von
Samuel Scherrer <[email protected]>
Gesendet: Montag, 8. April 2019 17:30:26
An: [email protected]
Betreff: [DuMuX] How to get intersections from scvf and
element?
Hi Dumux people,
I'm currently trying to use a grid generated with gmsh and
would
like
to set the boundaries based on BoundaryDomainMarkers.
I found that it's possible to access the boundary domain
markers
via
the function 'getBoundaryDomainMarkers', which accepts either a
Intersection or a boundary segment index as argument.
How do I now get the intersection/boundary segment index when I
have a
given element and scvf, e.g. inside the 'neumann' function
(solution
dependent neumann boundary)?
Best regards,
Samuel
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
_______________________________________________________________
Timo Koch phone: +49 711 685 64676
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
_______________________________________________________________
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
