​Hello I want to model evaporation in high temperature in porous media but water densities are tabulated for temperatures below 623.15 Kelvin. When i run for higher temperature than the specified value, i got the bellow error:
Warning: liquidDensity(T=980, p=9.91e+06) of component 'H2O' is outside tabulation range: (273.15<=T<=623.15), (0<=p<=2e+07). Forwarded to FluidSystem for direct evaluation of liquidDensity. Dune reported error: NumericalProblem [checkValidityRange:/home/mrk2/Desktop/DUMUX/DUMUX/dumux/dumux/material/components/iapws/region1.hh:73]: Density of water is only implemented for temperatures below 623.15K and pressures below 100MPa. (T=980, p=9.91e+06) ---> Abort! To fix this error,I go to the h2on2.hh file and set constant density instead of densityliq function and then go to the region1.hh file and change validity range. after that, I delete all buildcmake file and run dune-common but my change don't apply and i got above error again. Is there any way for setting density constant without change dumux module?and how can i apply my changes in dumux module? Best regards, Mohammad -- This email was Anti Virus checked by Security Gateway.
_______________________________________________ Dumux mailing list [email protected] https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
