Dear Mr. Johannes, Thanks for your reply.
I am writing to kindly inform you that I am working on my problem through DuMux around one year ago and I have some issues that require some guidance. Accordinly, I am wondering if DuMux team supports the idea of meeting online with users to help them in their work. Thanks for your time and support. Best Regards, Mohammad Hodroj ________________________________ From: Johannes Hommel <[email protected]> Sent: Monday, September 26, 2022 6:29 PM To: [email protected] <[email protected]>; Mohammad Hodroj (Alumni) <[email protected]> Subject: Re: [DuMux] Print Permeability values in vtu files Dear Mohammad, you need to add the permeability output specifically. An example would be https://git.iws.uni-stuttgart.de/dumux-repositories/dumux/-/blob/master/test/porousmediumflow/2pncmin/isothermal where you should see how permeability output can be added. Check the problem.hh: updateVtkOutput, everything to do with permeability,... and main.cc, especially lines 123-126: //add specific output vtkWriter.addField(problem->getPermeability(), "Permeability"); // update the output fields before write problem->updateVtkOutput(x); of this test and implement similar code in your main and problem file(s). Best regards Johannes Am 26.09.2022 um 17:16 schrieb Mohammad Hodroj (Alumni): Dear DuMux Team, I hope this email finds you well and safe. In general porosity, saturation, mobility, density, pressure, and capillary pressure are output by default in 2p model (porous media) and I can view the results using Paraview but I am not able to view the permeability values. Accordingly, I am writing to kindly ask you how can I add the permeability values in vtu files thus I can view them through Paraview? Thanks for your help and time. Best Regards, Mohammad Hodroj _______________________________________________ DuMux mailing list [email protected]<mailto:[email protected]> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux -- ******************************************************* Johannes Hommel Lehrstuhl für Hydromechanik und Hydrosystemmodellierung (LH2) Institut für Wasser- und Umweltsystemmodellierung (IWS), Universität Stuttgart https://www.iws.uni-stuttgart.de/lh2/ email: [email protected]<mailto:[email protected]> Pfaffenwaldring 61 70569 Stuttgart Tel.: ++49 711 / 685-64600 Department of Hydromechanics and Modelling of Hydrosystems (LH2) Institute for Modelling Hydraulic and Environmental Systems (IWS), University of Stuttgart https://www.iws.uni-stuttgart.de/en/lh2/ email: [email protected]<mailto:[email protected]> Pfaffenwaldring 61 70569 Stuttgart Tel.: ++49 711 / 685-64600
_______________________________________________ DuMux mailing list [email protected] https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
