[EMAIL PROTECTED] on 2/21/01 11:37 PM wrote:
> I've got a DuoDock II that has a Radius Color Pivot card in it. Today I
> picked up a Radius Color Pivot Monitor (to match the card!) and I wanted to
> see if it works. I hooked it up to the dock and inserted a Duo 280 that
> apparently must be dead. The dock powered on when I first plugged it in and
> it made the eject sound. Now, with the duo inserted, everything is dead. no
> power on, no eject. I did get the lid off with a bamboo skewer, but how do I
> get the duo out of the dock now?
>
You've obviously lost power somehow. It might even be a dead power supply
inside the dock. Did you hear any ticking (known as the tick of death).
You don't need to remove the lid.
There is an emergency release port on the left side as you face the dock. A
small square hole, below the lid, in the middle of that side. You can insert
the dock key and if you no longer have that (who does) use a small screw
driver. Put it in to the hole and press firmly. The dock should manually
release the Duo so you can gently slide it out.
-makmac
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
