>Dollars to donuts you've got the cable a bit "off." Disconnect the cable, give it a good look to make certain there are no foreign objects >inside the connector housing. Make certain the >connector is centered on the mating connector and that it is snug. I also tend to pop off the PRAM battery while messing with it, reconnecting it at >time of restart. This should give you a clean restart. There are two types of 2300 logics.....mine and yours. <<grin>> All have >the same connectors, etc. installed. The different rev levels seem to be housekeeping updates only, no major changes AFAIK. >Andrew Here's the newest on this problem: the 280c screen works fine when connected to its original board (the 280 board) i re-swapped the screens to check it. So the connector cable is ok. I also made sure the screen cable was seated correctly on the 2300 board -- in one last ditch attempt to get it to work. The connector on the 2300 board appears on visual inspection to have nothing worng with it... no bent pins.... I also took the pram battery out for 5 minutes to see if that would reset the baord. That said, it still doesnt work with the 2300 board. Is there a way to reset the motherboard? I dont mean using the power button on the back of the duo.... i mean a way to _reset_ the motherboard.... does anyone know? Is resetting the powermanager the same as pulling the pram battery>? If not, how does one reset the powermanager>? What a screwy problem this has become. i want a colour 2300~!!!!! ~Alex Free email addresses helping endangered species every time you write http://www.purpleturtle.com ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
